The microstructure of AlSi7Mg alloy in as cast condition

被引：5
|
作者：
Silesian University of Technology, ul. Krasińskiego 8, Katowice [1 ]
40-019, Poland
不详 [2 ]
02-507, Poland
机构：
来源：
Solid State Phenomena | / 3-10期
关键词：
Scanning electron microscopy - High resolution transmission electron microscopy - Magnesium alloys - Magnesium compounds - Microstructure - Silicon alloys;
D O I：
10.4028/www.scientific.net/SSP.229.3
中图分类号：
学科分类号：
摘要：
The complex microstructure of as-cast AlSi7Mg alloy has been investigated. Microstructure observations were done using light microscopy, scanning electron microscopy and transmission electron microscopy. Chemical composition of the microstructure constituents was investigated by means of energy dispersive spectrometry, conducted both during SEM and STEM investigations. Selected area diffraction was used to identify the phases in the alloy. Microstructure of the alloy in the as-cast condition consists of Al-Si eutectic and intermetallic phases in the interdendritic regions. These are: Mg2Si, α-AlFeMnS, β-AlFeSi and π-AlFeSiMg phases. What is more, number of fine precipitates were found within the α-Al dendrites. Only the occurrence of U1 (MgAl2Si2) phase has been confirmed. © (2015) Trans Tech Publications, Switzerland.
引用
下载
收藏
相关论文
共 50 条
  • [41] Interaction of AlSi7Mg with Oxide Ceramics
    Fankhaenel, Beate
    Stelter, Michael
    Voigt, Claudia
    Aneziris, Christos G.
    ADVANCED ENGINEERING MATERIALS, 2017, 19 (09)
  • [42] New rheocasting technology of semi-solid AlSi7Mg alloy
    Mao, Weimin
    Bai, Yuelong
    Gao, Songfu
    Tang, Guoxing
    Cailiao Yanjiu Xuebao/Chinese Journal of Materials Research, 2006, 20 (05): : 469 - 473
  • [43] Semisolid microstructural evolution of AlSi7Mg alloy during partial remelting
    Wang, H
    Davidson, CJ
    StJohn, DH
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 368 (1-2): : 159 - 167
  • [44] Development of Process Parameters for SLM Processing of AlSi7Mg Aluminum Alloy
    Zvonicek, Josef
    Koutny, Daniel
    Pantelejev, Libor
    Palousek, David
    CURRENT METHODS OF CONSTRUCTION DESIGN, 2020, : 515 - 524
  • [45] Usable Properties of AlSi7Mg Alloy after Sodium or Strontium Modification
    Tupaj, M.
    Orlowicz, A. W.
    Mroz, M.
    Trytek, A.
    Markowska, O.
    ARCHIVES OF FOUNDRY ENGINEERING, 2016, 16 (03) : 129 - 132
  • [46] The Effect of the Holding Time on the Microstructure of Gd-Containing AlSi7Mg Alloys
    Gursoy, Ozen
    Timelli, Giulio
    LIGHT METALS 2022, 2022, : 779 - 784
  • [47] Preparation of semi-solid AlSi7Mg alloy slurry with big capability
    LI Sha and MAO Weimin School of Materials Science and Engineering
    Rare Metals, 2010, 29 (06) : 642 - 645
  • [48] Influences of process parameters on microstructure and mechanical properties of AlSi7Mg aluminum alloy components formed by squeeze casting
    Jiang J.-F.
    Wang Y.
    Xiao G.-F.
    Deng T.
    Liu Y.-Z.
    Zhang Y.
    Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals, 2021, 31 (03): : 531 - 545
  • [49] Effect of the Type of Inorganic Binder on the Microstructure and Properties of AlSi7Mg Alloy Castings Made by Ablation Casting Technology
    Kaminska, Jadwiga
    Angrecki, Michal
    Puzio, Sabina
    MATERIALS, 2022, 15 (14)
  • [50] Effect of Ultrasonic-Assisted Treatment on Microstructure and Mechanical Properties of Laser Deposition Repairing AlSi7Mg Alloy
    Yi, Junzhen
    Sun, Pengbo
    Cui, Yanfeng
    Ren, Yuhang
    Wang, Chao
    Li, Changfu
    Yang, Guang
    ADVANCED ENGINEERING MATERIALS, 2024,
12345