The microstructure of AlSi7Mg alloy in as cast condition

被引：5
|
作者：
Silesian University of Technology, ul. Krasińskiego 8, Katowice [1 ]
40-019, Poland
不详 [2 ]
02-507, Poland
机构：
来源：
Solid State Phenomena | / 3-10期
关键词：
Scanning electron microscopy - High resolution transmission electron microscopy - Magnesium alloys - Magnesium compounds - Microstructure - Silicon alloys;
D O I：
10.4028/www.scientific.net/SSP.229.3
中图分类号：
学科分类号：
摘要：
The complex microstructure of as-cast AlSi7Mg alloy has been investigated. Microstructure observations were done using light microscopy, scanning electron microscopy and transmission electron microscopy. Chemical composition of the microstructure constituents was investigated by means of energy dispersive spectrometry, conducted both during SEM and STEM investigations. Selected area diffraction was used to identify the phases in the alloy. Microstructure of the alloy in the as-cast condition consists of Al-Si eutectic and intermetallic phases in the interdendritic regions. These are: Mg2Si, α-AlFeMnS, β-AlFeSi and π-AlFeSiMg phases. What is more, number of fine precipitates were found within the α-Al dendrites. Only the occurrence of U1 (MgAl2Si2) phase has been confirmed. © (2015) Trans Tech Publications, Switzerland.
引用
收藏
相关论文
共 50 条
  • [1] MICROSTRUCTURE, DEFECTS AND FATIGUE BEHAVIOR OF CAST AlSi7Mg ALLOY
    Fintova, Stanislava
    Konecna, Radomila
    Nicoletto, Gianni
    [J]. ACTA METALLURGICA SLOVACA, 2013, 19 (03): : 223 - 231
  • [2] Microstructure and Mechanical Properties AlSi7Mg Alloy with Sr, Al and AlSi7Mg
    Lipinski, Tomasz
    [J]. MANUFACTURING TECHNOLOGY, 2024, 24 (02): : 227 - 234
  • [3] Solidification behaviour and microstructure of AlSi7Mg cast alloy with addition of Li
    Petric, Mitja
    Zeka, Bastri
    Mrvar, Primoz
    Nagode, Ales
    Voncina, Maja
    Balasko, Tilen
    [J]. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 19 : 2084 - 2092
  • [4] Microstructure and properties of AlSi7Mg alloy by thixoforming
    Wang, P.
    Lu, G.M.
    Cui, J.Z.
    [J]. Tezhong Zhuzao Ji Youse Hejin/Special Casting & Nonferrous Alloys, 2001, (05):
  • [5] INFLUENCE OF AGE HARDENING PARAMETERS ON THE MICROSTRUCTURE AND PROPERTIES OF THE AlSi7Mg SAND CAST ALLOY
    Poloczek, L.
    Dybowski, B.
    Rodak, K.
    Jarosz, R.
    Kielbus, A.
    [J]. ARCHIVES OF METALLURGY AND MATERIALS, 2015, 60 (04) : 3035 - 3041
  • [6] Research on the continuous cast billets of semi-solid AlSi7Mg alloy and their microstructure formation
    [J]. Jinshu Xuebao/Acta Metallurgica Sinica, 2000, 36 (05): : 539 - 544
  • [7] Effect of pouring height on the solidified microstructure of AlSi7Mg alloy
    Weimin Mao
    [J]. International Journal of Minerals,Metallurgy and Materials, 2006, (04) : 324 - 328
  • [8] Effect of pouring height on the solidified microstructure of AlSi7Mg alloy
    Mao, Weimin
    Bai, Yuelong
    Lin, Hai
    [J]. JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING, 2006, 13 (04): : 324 - 328
  • [9] Thixoforming of AlSi7Mg: Microstructure and Properties
    Bieri, B
    Uggowitzer, PJ
    Speidel, MO
    Gabathuler, JP
    Imwinkelried, T
    [J]. COMPETITIVE ADVANTAGES BY NEAR-NET SHAPE MANUFACTURING, 1997, : 57 - 64
  • [10] Microstructure and Properties of Semi-Solid Extrusion of AlSi7Mg Alloy
    Zhao Da-zhi
    Liang Hai-cheng
    Liu Fang
    Yu Fu-xiao
    [J]. JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2010, 17 : 56 - 61
12345