Finite element simulation on the spin-forming of the 3D non-axisymmetric thin-walled tubes

被引：0
|
作者：
College of Mechanical Engineering, South China University of Technology, Guangzhou 510640, China [1 ]
不详 [2 ]
机构：
来源：
J Mater Sci Technol | 2006年 / 2卷 / 261-268期
关键词：
Calculations - Computer simulation - Finite element method - Forming - Rollers (machine components) - Rotation - Three dimensional - Tubes (components);
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The roller movement trace for the 3D non-axisymmetric thin-walled tubes is a complex space curve. Besides the roller rotation caused by contact with the blank, the roller rotates around the workpiece together with the main spindle, and also moves simultaneously along the direction of the revolution radius. The method to correctly establish the finite element (FE) models of the metal spinning is based on the MSC. MARC software was introduced. The calculation formulas considering both the revolution and rotation of the roller were obtained by the mathematical deduction. The saving calculation points m should be a multiple of 4 for one revolution of the roller around the workpiece to obtain the maximum forming force for the spinning of the 3D non-axisymmetric thin-walled tubes. The simulation results conform well to the experimental ones for several spinning methods; the maximum error is less than ±15%.
引用
收藏
相关论文
共 50 条
  • [21] A dynamic finite element procedure for bending collapse of composite thin-walled lenticular tubes
    Jia, Qilong
    An, Ning
    Ma, Xiaofei
    Zhou, Jinxiong
    COMPOSITE STRUCTURES, 2022, 287
  • [22] Numerical simulation for interaction between 3D thin-walled structure and fluid
    College of Civil Engineering, Shenzhen University, Shenzhen 518060, China
    不详
    不详
    Shenzhen Daxue Xuebao (Ligong Ban), 2008, 2 (111-116):
  • [23] Non-linear analysis of a cold rolled forming thin-walled steel column by the finite element method
    del Coz Diaz, J. J.
    Garcia Nieto, P. J.
    Vilan Vilan, J. A.
    Matias Fernandez, J. M.
    RECENT PROGRESS IN COMPUTATIONAL SCIENCES AND ENGINEERING, VOLS 7A AND 7B, 2006, 7A-B : 114 - +
  • [24] Finite Element Simulation of Bending Thin-Walled Parts and Optimization of Cutting Parameters
    Ma, Hailong
    Tang, Aijun
    Xu, Shubo
    Li, Tong
    METALS, 2023, 13 (01)
  • [25] Finite element simulation on the deep drawing of titanium thin-walled surface part
    Enzhi Gao
    Hongwei Li
    Hongchao Kou
    Hui Chang
    Jinshan Li
    Lian Zhou
    Rare Metals, 2010, 29 : 108 - 113
  • [26] Finite element simulation on the deep drawing of titanium thin-walled surface part
    GAO Enzhi
    RareMetals, 2010, 29 (01) : 108 - 113
  • [27] Finite element simulation on the deep drawing of titanium thin-walled surface part
    Gao Enzhi
    Li Hongwei
    Kou Hongchao
    Chang Hui
    Li Jinshan
    Zhou Lian
    RARE METALS, 2010, 29 (01) : 108 - 113
  • [28] MECHANISM RESEARCH FOR 3D NON-AXISYMMETRIC THIN-WALL TUBE OFFSET SPINNING
    KUANG Weihua Faculty of Material and Energy
    Chinese Journal of Mechanical Engineering, 2006, (02) : 217 - 222
  • [29] Development of simplified finite element models for straight thin-walled tubes with octagonal cross section
    Liu, Y.
    Day, M. L.
    INTERNATIONAL JOURNAL OF CRASHWORTHINESS, 2007, 12 (05) : 503 - 508
  • [30] Finite element modeling of the crushing behavior of thin-walled CFRP tubes under axial compression
    Siromani, Deepak
    Awerbuch, Jonathan
    Tan, Tein-Min
    COMPOSITES PART B-ENGINEERING, 2014, 64 : 50 - 58
12345