Bonding mechanism of ply during automated tape laying process

被引：0

作者：

Zhang, Peng ^{[1
]}

Sun, Ronglei ^{[1
]}

Lian, Haitao ^{[1
]}

Huang, Wenzong ^{[1
]}

Wang, Qingyou ^{[2
]}

Song, Wenjuan ^{[2
]}

机构：

[1] State Key Lab of Digital Manufacturing Equipment and Technology, Huazhong University of Science and Technology, Wuhan 430074, China

[2] AVIC Harbin Aircraft Industry Group Co Ltd, Harbin 150066, China

来源：

Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica | 2014年 / 31卷 / 01期

关键词：

Automated tape laying (ATL) - Bonding mechanism - Bonding process - Calculation formula - Mould temperature - Parallel plates - Processing parameters - Viscosity of resin;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

The bonding mechanism of adjacent plies during the tap laying process was discussed, and the bonding process was modeled as squeezing flow of resin patch under parallel plate. It is pointed out that when the viscosity of resin is constant, the bonding capability will become stronger when infiltration effect of the interface becomes better. The calculation formula of the infiltration effect was deduced by using fluid mechanics theory. Influence of main processing parameters (layup pressure, layup velocity, etc.) on infiltration effect and bonding capability was analyzed. The peel force was used to quantify the bonding capability of the ply. A series of experiments were carried out on the automated tape laying platform. It is shown that the bonding capability will become weaker as the layup velocity increases, and become stronger as layup pressure, mould temperature and roller radius increase. This law conforms to the calculation formula of the infiltration effect.

引用

页码：40 / 48

共 50 条

[41] TAPE AUTOMATED BONDING FOR HIGH-DENSITY PACKAGING
KURZWEIL, K
ELECTROCOMPONENT SCIENCE AND TECHNOLOGY, 1981, 8 (1-2): : 15 - 19
[42] ADVANCES IN SINGLE-POINT TAPE AUTOMATED BONDING
HAMMOND, R
INTERCONNECTION TECHNOLOGY, 1994, 10 (01): : 14 - 18
[43] Prediction of in-situ strength of thermoplastic composite laminate by simulation of the automated tape laying process using PAMFORM
Haverkamp, Jorn
Shroff, Sonell
INSIGHTS AND INNOVATIONS IN STRUCTURAL ENGINEERING, MECHANICS AND COMPUTATION, 2016, : 929 - 934
[44] Composite material thermal characterization for a digital twin-based model of an automated tape-laying process
de Sá Rodrigues, Jhonny
Rodrigues, Jhonny
Revista de Materiales Compuestos, 2024, 8 (01):
[45] Analysis and optimization of the deformability of flax fiber nonwoven tapes during the tape-laying process
Lu, Jingshu
Krugl, Sascha
Pidancier, Christian
L'Hostis, Gildas
Wang, Peng
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2025, 137 (7-8): : 3641 - 3656
[46] Prediction of Gaps in Automated Tape Laying and Their Influence on Porosity in Consolidated Laminates
Link, Tobias
Rosenberg, Philipp
Henning, Frank
JOURNAL OF COMPOSITES SCIENCE, 2022, 6 (07):
[47] 3D THERMO-MECHANICAL MODEL BASED SIMULATION OF THE WELDING OF THERMOPLASTIC COMPOSITE TAPE USING AUTOMATED TAPE LAYING (ATL) PROCESS
Kergomard, Yann Duplessis
Satheesh, Britto
Dufort, Laurent
Schledjewski, Ralf
20TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS, 2015,
[48] Research on trajectory planning method of automated tape laying and automated fiber placement for surfaces with holes
Xiao, J. (j.xiao@nuaa.edu.cn), 1716, Chinese Society of Astronautics (34):
[49] ALTERNATIVE WAY OF MAKING BUMPS FOR TAPE AUTOMATED BONDING.
Kopejtko, Karel
Vilim, Jindrich
Electrocomponent Science and Technology, 1979, 6 (3-4): : 185 - 187
[50] SPECIAL REPORT - TAPE AUTOMATED BONDING MEETS VLSI CHALLENGE
LYMAN, J
ELECTRONICS, 1980, 53 (27): : 100 - 105

← 1 2 3 4 5 →