Microstructure and properties of Fe-based amorphous metallic coating produced by high velocity axial plasma spraying

被引：0
|
作者：
Liu, X.Q. [1 ]
Zheng, Y.G. [2 ]
Chang, X.C. [1 ]
Hou, W.L. [1 ]
Wang, J.Q. [1 ]
Tang, Z. [3 ]
Burgess, A. [3 ]
机构：
[1] Shenyang National Laboratory for Materials Science, Institute of Metal Research, CAS, Shenyang, 110016, China
[2] State Key Laboratory for Corrosion and Protection, Institute of Metal Research, CAS, Shenyang, 110016, China
[3] Northwest Mettech Corp., North Vancouver, BC, Canada
来源：
Journal of Alloys and Compounds | 2009年 / 484卷 / 1-2期
关键词：
An FeCrMoMnWBCSi amorphous metallic coating with thickness of about 1 mm and porosity less than 0.1% was deposited onto a mild steel by a high velocity axial plasma spraying. The microstructure evolution of the coating was characterized with SEM; XRD; and the coating micro-hardness; erosion-corrosion and corrosion behavior were tested. It was found that the formation of amorphous phase in the coating is sensitive to plasma spray parameters; and powder size. The coating exhibited a good combination of high micro-hardness and excellent erosion-corrosion resistance even in a serious media. This amorphous metallic coating could be applied as a good alternative material in erosion and corrosion environments. © 2009 Elsevier B.V. All rights reserved;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：300 / 307
相关论文
共 50 条
  • [41] Formation and properties of Ni-based amorphous metallic coating produced by HVAF thermal spraying
    Wang, AP
    Zhang, T
    Wang, HQ
    MATERIALS TRANSACTIONS, 2005, 46 (05) : 1010 - 1015
  • [42] The evaluation of microstructure characteristic and corrosion performance of laser-re-melted Fe-based amorphous coating deposited via plasma spraying
    Zhang, Xiao-Lin
    Jiang, Chao-Ping
    Zhang, Feng-Ying
    Xing, Ya-Zhe
    MATERIALS EXPRESS, 2019, 9 (09) : 1100 - 1105
  • [43] Fabrication and characterization of Fe-based amorphous coatings prepared by high-velocity arc spraying
    Guo, Wenmin
    Zhang, Jianfeng
    Wu, Yuping
    Hong, Sheng
    Qin, Yujiao
    MATERIALS & DESIGN, 2015, 78 : 118 - 124
  • [44] Microstructure and sliding wear behavior of Fe-Al coating produced by high velocity arc spraying
    Zhu, ZX
    Xu, BS
    Ma, SN
    Zhang, W
    Du, ZY
    CONTRIBUTIONS OF SURFACE ENGINEERING TO MODERN MANUFACTURING AND REMANUFACTURING, 2002, : 174 - 177
  • [45] Preparation, Microstructure and Friction properties of Cold Sprayed Fe-based Amorphous Composite Coating
    Li, Xu
    Wang, Qiang
    Mao, Xuan
    Niu, Wenjuan
    Wang, Lu
    Li, Nan
    Han, Peng
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2021, 50 (06): : 2186 - 2193
  • [46] Fabrication, microstructure and micromechanical properties of Fe-based metallic glass coating manufactured by laser
    Zhang, Peilei
    Zhang, Qi
    Yan, Hua
    Yu, Zhishui
    Yang, Jin
    Chen, Jieshi
    Wu, Di
    Shi, Haichuan
    Tian, Yingtao
    Ma, Songyun
    Lei, Weisheng
    SURFACE & COATINGS TECHNOLOGY, 2021, 405
  • [47] Microstructure and Properties of Fe-based Amorphous/Nanocrystalline Coating Prepared by Arc Surface Welding
    Bin Wang
    MingYan Jiang
    Yingchao Xu
    Jing Hu
    Jie Wang
    Cui Zhou
    JOM, 2020, 72 : 665 - 672
  • [48] Preparation, Microstructure and Friction properties of Cold Sprayed Fe-based Amorphous Composite Coating
    Li Xu
    Wang Qiang
    Mao Xuan
    Niu Wenjuan
    Wang Lu
    Li Nan
    Han Pen
    RARE METAL MATERIALS AND ENGINEERING, 2021, 50 (06) : 2186 - 2193
  • [49] Microstructure and Properties of Fe-based Amorphous/Nanocrystalline Coating Prepared by Arc Surface Welding
    Wang, Bin
    Jiang, MingYan
    Xu, Yingchao
    Hu, Jing
    Wang, Jie
    Zhou, Cui
    JOM, 2020, 72 (02) : 665 - 672
  • [50] Microstructure and Properties of Fe-based Composite Coating by Plasma Jet Surface Metallurgy
    Chen, Hao
    Yang, Jiangao
    Chen, Misong
    MATERIALS SCIENCE AND ENGINEERING, PTS 1-2, 2011, 179-180 : 253 - +
12345