Cuttlebone as reinforcing filler for natural rubber

被引：0
|
作者：
Poompradub, Sirilux [1 ]
Ikeda, Yuko [2 ]
Kokubo, Yota [2 ]
Shiono, Takeshi [2 ]
机构：
[1] Department of Chemical Technology, Faculty of Science, Chulalongkorn University, Phatumwon, Bangkok 10330, Thailand
[2] Graduate School of Science and Technology, Department of Chemistry and Materials Technology, Kyoto Institute of Technology, Matsugasaki, Sakyo-ku, Kyoto, 606-8585, Japan
来源：
European Polymer Journal | 2008年 / 44卷 / 12期
关键词：
Cuttlebone was proved to be a biomass for new reinforcing filler for natural rubber (NR). The cuttlebone particles were obtained by crushing cuttlebone and followed by sieving. Density and crystal structure of the cuttlebone were 2.70 g/cm3 and an aragonite form of CaCO3; respectively. The surface area and average diameter of the cuttlebone particles were measured and the reinforcement effect as filler for NR was investigated. The cuttlebone particles did not prevent a peroxide cross-linking reaction of NR; and mechanical properties of peroxide cross-linked NR filled with cuttlebone particles were found to be comparable with those of peroxide cross-linked NR filled with commercial CaCO3 filler. Presence of chitin on the surface of the cuttlebone particles was speculated to result in a good interaction between cuttlebone particles and NR; which may be ascribed to the mechanical properties of cuttlebone filled NR samples. Crown Copyright © 2008;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：4157 / 4164
相关论文
共 50 条
  • [31] Aluminium trihydroxide: Novel reinforcing filler in Polychloroprene rubber
    Vijayan, Dhanya
    Mathiazhagan, A.
    Joseph, Rani
    POLYMER, 2017, 132 : 143 - 156
  • [32] Sepiolite nanoclay: A reinforcing filler in the natural rubber/butadiene rubber (NR/BR) matrix for tire tread compound application
    Mohanty, Tapas R.
    Neeraj, P.K.
    Ramakrishnan, S.
    Amarnath, S.K.P.
    Lorenzetti, Daniele
    Mohamed, P.K.
    Rubber World, 2021, 263 (05): : 32 - 44
  • [33] Lignin as Alternative Reinforcing Filler in the Rubber Industry: A Review
    Aini, Nor Anizah Mohamad
    Othman, Nadras
    Hussin, M. Hazwan
    Sahakaro, Kannika
    Hayeemasae, Nabil
    FRONTIERS IN MATERIALS, 2020, 6
  • [34] Characterization of polypropylene composites using sludge waste from the natural rubber latex industry as reinforcing filler
    Homkhiew, Chatree
    Srivabut, Chainarong
    Ratanawilai, Thanate
    Rawangwong, Surasit
    Chantaramanee, Suchart
    JOURNAL OF MATERIAL CYCLES AND WASTE MANAGEMENT, 2023, 25 (03) : 1444 - 1456
  • [35] Poly(dopamine)-modified microcrystalline cellulose,a green reinforcing filler for natural rubber latex with high performance
    Rui, Wang
    Sun, Yiwen
    Tian, Yong
    Li, Xiaoxiao
    Han, Jingjie
    COMPOSITE INTERFACES, 2023, 30 (04) : 361 - 375
  • [36] Characterization of polypropylene composites using sludge waste from the natural rubber latex industry as reinforcing filler
    Chatree Homkhiew
    Chainarong Srivabut
    Thanate Ratanawilai
    Surasit Rawangwong
    Suchart Chantaramanee
    Journal of Material Cycles and Waste Management, 2023, 25 : 1444 - 1456
  • [37] Mechanochemical Methacrylation of Lignin for Biobased Reinforcing Filler in Rubber Compounds
    Ferruti, Federica
    Carnevale, Mattia
    Giannini, Luca
    Guerra, Silvia
    Tadiello, Luciano
    Orlandi, Marco
    Zoia, Luca
    ACS SUSTAINABLE CHEMISTRY & ENGINEERING, 2024, 12 (37): : 14028 - 14037
  • [38] The potential of cuttlebone as reinforced filler of polyurethane
    Shang, Songmin
    Chiu, Ka-Lok
    Yuen, Chun Wah Marcus
    Jiang, Shouxiang
    COMPOSITES SCIENCE AND TECHNOLOGY, 2014, 93 : 17 - 22
  • [39] NON-BLACK FILLER-REINFORCING MATERIALS FOR RUBBER
    BARBOUR, AL
    ELASTOMERICS, 1978, 110 (06): : 23 - 27
  • [40] A plant product modified carbon black as a reinforcing filler for rubber
    Ghosh, AK
    Adhikari, B
    Maiti, S
    JOURNAL OF POLYMER MATERIALS, 1995, 12 (04): : 285 - 295
12345