PHOTO-THERMAL COUPLING MODEL AND EXPERIMENT OF SOLAR TOWER CAVITY RECEIVER

被引:0
|
作者
Xu J. [1 ,2 ]
Hu J. [1 ,3 ]
Chen D. [1 ]
Xiao G. [1 ,2 ]
机构
[1] State Key Laboratory of Clean Energy Utilization of Zhejiang University, Hangzhou
[2] Jiaxing Institute of Zhejiang University, Jiaxing
[3] Cecep Guoji United Power(Ningxia)Co.,Ltd., Yinchuan
来源
关键词
concentration; experiment; simulation; solar absorber; solar energy; temperature distribution;
D O I
10.19912/j.0254-0096.tynxb.2021-1058
中图分类号
学科分类号
摘要
A ray tracing model is established based on the Monte Carlo method,and a CCD camera and a Lambertian plate are used to carry out the concentrated flux experiment. The experimental results show that the measured and the simulated spots are in good agreement in size,shape and flux distribution. A photothermal coupling model is proposed for the cavity receiver. Considering the radiation heat transfer between different heat absorbing tubes in the cavity,the maximum relative error between the simulation results and the experimental results is 8.6%. © 2023 Science Press. All rights reserved.
引用
收藏
页码:15 / 21
页数:6
相关论文
共 14 条
  • [11] PRAKASH M, NAYAK J K., Numerical study of natural convection loss from open cavities[J], International journal of thermal sciences, 51, pp. 23-30, (2012)
  • [12] JILTE R D, KEDARE S B., Experimental investigation on heat losses from differentially heated cylindrical cavity receiver used in paraboloid concentrator [J], Journal of solar energy engineering, 139, 3, (2017)
  • [13] WU S Y,, XIAO L, Et al., Convection heat loss from cavity receiver in parabolic dish solar thermal power system:a review[J], Solar energy, 84, 8, pp. 1342-1355, (2010)
  • [14] ORTJOHANN J., Convective heat loss from upward and downward facing cavity solar receivers:measurements and calculations[J], Journal of solar energy engineering, 117, 2, pp. 75-84, (1995)