Experimental study on tensile properties of semi-grouting sleeve after high temperature

被引：0
|
作者：
Zhu J.-N. [1 ,2 ]
Guo D.-D. [1 ]
Ma J.-F. [1 ]
Wu Y.-P. [1 ]
Ma J.-J. [1 ]
机构：
[1] School of Civil Engineering, Xi'an University of Architecture & Technology, Xi'an
[2] Key Lab of Structural Engineering and Earthquake Resistance, Ministry of Education (XAUAT), Xi'an
来源：
Gongcheng Lixue/Engineering Mechanics | 2020年 / 37卷 / 05期
关键词：
Anchoring length; Cementitious grout; Failure mode; High temperature; Semi-grouting sleeves;
D O I：
10.6052/j.issn.1000-4750.2019.06.0322
中图分类号：
学科分类号：
摘要：
The compressive strength test and uniaxial tensile test of standard test block of grouting material and cast iron semi-grouting sleeve connector were carried out at room temperature, 200℃, 300℃, 400℃ and 600℃, respectively. The influence of temperature on the performance of grouting material, and the influence of anchoring length and protective layer thickness on the tensile properties of semi-grouting sleeve connection specimen after high temperature were studied, and the change of failure mode of semi-grouting sleeve connection after high temperature was analyzed. The results showed that the compressive strength of grouting material decreased with the increase of temperature, and that the loss of compressive strength of grouting material was 73% after 600℃ temperature. After high temperature, the fracture failure of sleeve specimen gradually changed from steel-bar yield failure to steel bar yield pull-out failure, and finally became pull-out failure of steel bar before yielding, and the tensile performance of unprotected specimens were lower than that of protected specimens at all cases of temperature. Based on the test data, the calculation formula is respectively developedfor the compressive strength of grouting material varying with temperature and for the ultimate tensile force of semi-grouting sleeve varying with temperature and with anchoring length, which provided a reference for related design and engineering construction. © 2020, Engineering Mechanics Press. All right reserved.
引用
收藏
页码：104 / 111
页数：7
相关论文
共 17 条
  • [1] Yee, Alfred asocial and environmental benefits of precast concrete technology, Pci. Journal, 46, 3, pp. 14-19, (2001)
  • [2] Ma J., Pan J., Liu S., Et al., Experimental study on seismic performance of full precast shear wall-frame structures with reinforcement spliced by grout-filled sleeves, Engineering Mechanics, 34, 10, pp. 178-187, (2017)
  • [3] Zhang W., Zhang C., Non-linear analysis of precast RC column with steel bars spliced by compressive sleeves, Engineering Mechanics, 35, pp. 67-72, (2018)
  • [4] Kim Y., A study of pipe splice sleeves for use in precast beam-column connections, (2000)
  • [5] Einea A., Yamane T., Tadros M.K., Grout-filled pipe splices for precast concrete construction, Pci. Journal, 40, 1, pp. 82-93, (1995)
  • [6] Shen B., Ma K., Deng C., Theoretical and experimental investigation on the static stability of a sleeved column, Engineering Mechanics, 30, 3, pp. 8-16, (2013)
  • [7] Alias A., Sapawi F., Kusbiantoro A., Et al., Performance of grouted splice sleeve connector under tensile load, 7, 1, pp. 1094-1102, (2014)
  • [8] Wu X., Lin F., Wang T., Experimental research on effects of grout age and types of steel bars on mechanical behavior of grout sleeve splicing for reinforcing bars, Building Structure, 14, pp. 77-82, (2013)
  • [9] Wu T., Liu Q., Cheng R., Et al., Experimental study and stress analysis of mechanical performance of grouted sleeve splice, Engineering Mechanics, 34, 10, pp. 68-75, (2017)
  • [10] Zheng Y., Guo Z., Experimental study and finite element analysis on behavior of deformed gout-filled pipe splice, Journal of Building Structures, 37, 3, pp. 94-102, (2016)
12