Using Glycerin, a By-Product of Biodiesel, as a Grinding Aid in the Dry Grinding of Marble Dust Waste

被引:0
|
作者
Katırcıoğlu-Bayel D. [1 ]
机构
[1] Niğde Ömer Halisdemir University, Engineering Faculty, Mining Engineering Department, TÜRKİYE, Niğde
来源
Scientific Mining Journal | 2023年 / 62卷 / 02期
关键词
Dry grinding; Grinding aid; Marble waste; Mineral filler; Recycling;
D O I
10.30797/madencilik.1196039
中图分类号
学科分类号
摘要
Glycerin represents the primary by-product of biodiesel generation when vegetable oil is transesterified with ethanol or methanol. It is essential to study how to prevent natural resource depletion and transform waste into usable and valuable products. Using glycerin as a grinding aid can be an alternative solution for utilizing the excess glycerin resulting from biodiesel production. This paper investigated the usability of unrefined glycerin as a grinding aid in the dry grinding of marble wastes in terms of grinding efficiency while planning to reduce the adverse impacts of waste on the environment via its efficient utilization. The dry grinding experiments conducted within the study’s scope researched the impacts of five dosages (0%, 0.25%, 0.5%, 1%, and 2% by weight) on the product. The current research is promising in terms of preventing the depletion of natural resources and transforming waste into usable and valuable products. Furthermore, considerable enhancements were obtained in the grinding performance with the grinding aid utilized. © 2023 Union of Chambers of Engineers and Architects of Turkey. All rights reserved.
引用
收藏
页码:61 / 66
页数:5
相关论文
共 50 条
  • [41] EXPERIENCES IN DRY GRINDING WITH HIGH COMPRESSION ROLLER MILLS FOR END PRODUCT QUALITY BELOW 20 MICRONS
    SCHWECHTEN, D
    MILBURN, GH
    [J]. MINERALS ENGINEERING, 1990, 3 (1-2) : 23 - 34
  • [42] Influence of dry and wet grinding conditions on fineness and shape of particle size distribution of product in a ball mill
    Kotake, Naoya
    Kuboki, Mitsuyuki
    Kiya, Shinichi
    Kanda, Yoshiteru
    [J]. ADVANCED POWDER TECHNOLOGY, 2011, 22 (01) : 86 - 92
  • [43] Experimental investigation of cutting forces in dry grinding of Ti-6Al-4V alloy using CNT nano grinding tool
    Stephen, Deborah Serenade
    Prabhu, Sethuramalingam
    [J]. JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2024, 46 (06)
  • [44] Grinding Behaviour of Aluminum Powder for Al/CNTs Nano Composites Fabrication by Dry Grinding Process Using a High Speed Planetary Ball Mill
    Choi, Heekyu
    Lee, Jehyun
    Kim, Seongsoo
    Choi, Gyungpil
    Bae, Daehyung
    Lee, Sungbak
    Lee, Woong
    [J]. KOREAN JOURNAL OF MATERIALS RESEARCH, 2013, 23 (02): : 89 - 97
  • [45] Sustainable hydrogen and syngas production from waste valorization of biodiesel synthesis by-product: Green chemistry approach
    Khademi, Mohammad Hasan
    Alipour-Dehkordi, Afshar
    Nalchifard, Fereshteh
    [J]. RENEWABLE & SUSTAINABLE ENERGY REVIEWS, 2023, 175
  • [46] MECHANOCHEMICAL CHANGES IN NATURAL AND SYNTHETIC ZEOLITES BY DRY GRINDING USING A PLANETARY BALL MILL
    KASAI, E
    MIMURA, H
    SUGIYAMA, K
    SAITO, F
    AKIBA, K
    WASEDA, Y
    [J]. ADVANCED POWDER TECHNOLOGY, 1994, 5 (02) : 189 - 203
  • [47] Performance of Using Waste Marble Dust for the Improvement of Loose Sand in Deep Soil Mixing
    Mahdi Z. Alnunu
    Zalihe Nalbantoglu
    [J]. Arabian Journal for Science and Engineering, 2022, 47 : 4681 - 4694
  • [48] Mechanical pretreatment of cellulose pulp to produce cellulose nanofibrils using a dry grinding method
    Lee, Hansol
    Mani, Sudhagar
    [J]. INDUSTRIAL CROPS AND PRODUCTS, 2017, 104 : 179 - 187
  • [49] Performance of Using Waste Marble Dust for the Improvement of Loose Sand in Deep Soil Mixing
    Alnunu, Mahdi Z.
    Nalbantoglu, Zalihe
    [J]. ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2022, 47 (04) : 4681 - 4694
  • [50] The grinding behavior of ground copper powder for Cu/CNT nanocomposite fabrication by using the dry grinding process with a high-speed planetary ball mill
    Choi, Heekyu
    Bor, Amgalan
    Sakuragi, Shiori
    Lee, Jehyun
    Lim, Hyung-Tae
    [J]. JOURNAL OF THE KOREAN PHYSICAL SOCIETY, 2016, 68 (01) : 147 - 153