Analysis of wear debris generated from the metal-on-metal hip joint

被引：0

作者：

Uo, Motohiro ^{[1
]}

Watari, Fumio ^{[1
]}

Asakura, Kiyotaka ^{[2
]}

Katayama, Naoyuki ^{[3
]}

Onodera, Shin ^{[4
]}

Tohyama, Harukazu ^{[4
]}

Hamada, Koichi ^{[5
]}

Ohnuki, Somei ^{[5
]}

机构：

[1] Department of Biomedical Materials and Engineering, Graduate School of Dental Medicine, Hokkaido University, Sapporo, Japan

[2] Catalyst Research Center, Hokkaido University, Sapporo, Japan

[3] Hokkaido Orthopedics Memorial Hospital, Sapporo, Japan

[4] Department of Sports Medicine and Joint Reconstruction Surgery, Graduate School of Dental Medicine, Hokkaido University, Sapporo, Japan

[5] Division of Materials Science, Graduate School of Dental Medicine, Hokkaido University, Sapporo, Japan

来源：

Nano Biomedicine | 2009年 / 1卷 / 02期

关键词：

Cobalt alloys - Metals - X ray absorption - Hip prostheses - Wear debris - Binary alloys;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

The elemental concentration, shape and chemical state of debris contained in the articular capsules of metal-on-metal hip joints were examined. Co derived from Co-Cr alloy was detected with high concentration. By TEM observation, some larger debris in several hundred nanometers and a lot of smaller debris smaller than several ten nanometers were observed. The debris could be observed in the severe metallosis region. Most of Co contained in the articular capsules could be estimated as the metallic state by fluorescence XAFS analysis, which provides high sensitivity for chemical state analysis. Therefore, the metallosis of the articular capsule could be assumed as mainly caused by the metallic debris.

引用

页码：133 / 136

共 50 条

[1] Quantitative analysis of wear and wear debris from metal-on-metal hip prostheses tested In a physiological hip joint simulator
Firkins, PJ
Tipper, JL
Saadatzadeh, MR
Ingham, E
Stone, MH
Farrar, R
Fisher, J
BIO-MEDICAL MATERIALS AND ENGINEERING, 2001, 11 (02) : 143 - 157
[2] Characterisation of wear debris from UHMWPE on zirconia ceramic, metal-on-metal and alumina ceramic-on-ceramic hip prostheses generated in a physiological anatomical hip joint simulator
Tipper, JL
Firkins, PJ
Besong, AA
Barbour, PSM
Nevelos, J
Stone, MH
Ingham, E
Fisher, J
WEAR, 2001, 250 : 120 - 128
[3] A simulator study of adverse wear with metal and cement debris contamination in metal-on-metal hip bearings
Halim, T.
Clarke, I. C.
Burgett-Moreno, M. D.
Donaldson, T. K.
Savisaar, C.
Bowsher, J. G.
BONE & JOINT RESEARCH, 2015, 4 (03): : 29 - 37
[4] Metal-on-metal hip joint tribology
Dowson, D
Jin, ZM
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE, 2006, 220 (H2) : 107 - 118
[5] The wear pattern in metal-on-metal hip prostheses
Anissian, HL
Stark, A
Good, V
Dahlstrand, H
Clarke, IC
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH, 2001, 58 (06): : 673 - 678
[6] The acting wear mechanisms on metal-on-metal hip joint bearings:: in vitro results
Wimmer, MA
Loos, J
Nassutt, R
Heitkemper, M
Fischer, A
WEAR, 2001, 250 : 129 - 139
[7] A Lexicon for Wear of Metal-on-Metal Hip Prostheses
McKellop, Harry A.
Hart, Alister
Park, Sang-Hyun
Hothi, Harry
Campbell, Pat
Skinner, John A.
JOURNAL OF ORTHOPAEDIC RESEARCH, 2014, 32 (09) : 1221 - 1233
[8] Characterization of wear debris from metal-on-metal hip implants during normal wear versus edge-loading conditions
Kovochich, Michael
Fung, Ernest S.
Donovan, Ellen
Unice, Kenneth M.
Paustenbach, Dennis J.
Finley, Brent L.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS, 2018, 106 (03) : 986 - 996
[9] Influence of Lubrication Performance on Wear Factor in Metal-on-Metal Hip Joint Replacement using Numerical Analysis
Harun, Muhamad Noor
Jin, Zhongmin
Syahrom, Ardiyansyah
INTERNATIONAL TRIBOLOGY CONFERENCE MALAYSIA 2013, 2013, 68 : 95 - 101
[10] Effects of CoCr metal wear debris generated from metal-on-metal hip implants and Co ions on human monocyte-like U937 cells
Posada, Olga M.
Tate, Rothwelle J.
Grant, M. Helen
TOXICOLOGY IN VITRO, 2015, 29 (02) : 271 - 280

← 1 2 3 4 5 →