Cause analysis and solving measures of high oil temperature in a series of wind turbine gearboxes

被引：0
|
作者：
Xu, Zengjin [1 ]
Xue, Yuanyuan [1 ]
Yang, Yongjiang [2 ]
Xing, Zuoxia [3 ]
机构：
[1] School of Chemical Equipment, Shenyang University of Technology, Liaoyang,111003, China
[2] Shenyang Blower Works Group Wind Power Co., Ltd., Shenyang,110869, China
[3] New Energy Research Institute, Shenyang University of Technology, Shenyang,110870, China
来源：
Taiyangneng Xuebao/Acta Energiae Solaris Sinica | 2020年 / 41卷 / 03期
关键词：
Aiming at the high oil temperature problem in one 1.5 MW wind turbine gearbox; through calculating theoretically the heat transfer in the lubricating oil heat exchanger of the gearbox; the actual cooling effect in different wind farm heat exchangers of the same model and in the same unit under different operating conditions is analyzed and compared in this paper. It can be found that the factors causing lubricating oil high temperature may be as follows: the inappropriateness of the fin structure selection; the lack of improper sealing of the nacelle; low design flow rate of lubricating oil; temperature control valve or oil temperature sensor becoming invalid and generator cooling water lack; etc; Therefore; on the basis of excluding the component problem; the problem of high oil temperature is completely solved by changing the structure of the radiator fin; increasing the heat exchanger area and the flow rate of the cooling fan in heat exchanger. The practical application of the project shows that the method proposed in this paper can be used to solve the problem of high oil temperature for this series of gearboxes; and also provides reference for the technical upgrade of subsequent products. © 2020; Editorial Board of Acta Energiae Solaris Sinica. All right reserved;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
引用
收藏
页码：74 / 79
相关论文
共 50 条
  • [41] High Temperature Superconducting Generator Design for Offshore Wind Turbine Application
    Khalil, Md. Ebrahim
    2ND INTERNATIONAL CONFERENCE ON ELECTRICAL ENGINEERING AND INFORMATION COMMUNICATION TECHNOLOGY (ICEEICT 2015), 2015,
  • [42] High-pressure behavior and tribological properties of wind turbine gear oil
    Mia, Sobahan
    Mizukami, Shota
    Fukuda, Ryusei
    Morita, Shigeki
    Ohno, Nobuyoshi
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2010, 24 (01) : 111 - 114
  • [43] High-pressure behavior and tribological properties of wind turbine gear oil
    Sobahan Mia
    Shota Mizukami
    Ryusei Fukuda
    Shigeki Morita
    Nobuyoshi Ohno
    Journal of Mechanical Science and Technology, 2010, 24 : 111 - 114
  • [44] Prediction of Wind Turbine Gearbox Oil Temperature Based on Stochastic Differential Equation Modeling
    Su, Hongsheng
    Ding, Zonghao
    Wang, Xingsheng
    MATHEMATICS, 2024, 12 (17)
  • [45] Rotor-Current-Based Fault Diagnosis for DFIG Wind Turbine Drivetrain Gearboxes Using Frequency Analysis and a Deep Classifier
    Cheng, Fangzhou
    Wang, Jun
    Qu, Liyan
    Qiao, Wei
    IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2018, 54 (02) : 1062 - 1071
  • [46] Rotor Current-Based Fault Diagnosis for DFIG Wind Turbine Drivetrain Gearboxes Using Frequency Analysis and a Deep Classifier
    Cheng, Fangzhou
    Wang, Jun
    Qu, Liyan
    Qiao, Wei
    2017 IEEE INDUSTRY APPLICATIONS SOCIETY ANNUAL MEETING, 2017,
  • [47] The numerical analysis of wind turbine airfoils at high angles of attack
    Nelson, Bryan
    Kouh, Jen-Shiang
    INTERNATIONAL JOURNAL OF ENERGY AND ENVIRONMENTAL ENGINEERING, 2016, 7 (01) : 1 - 12
  • [48] Pushover Analysis of a 53 m High Wind Turbine Tower
    Guo, Lanhui
    Uang, Chia-Ming
    Elgamal, Ahmed
    Prowell, Ian
    Zhang, Sumei
    ADVANCED SCIENCE LETTERS, 2011, 4 (03) : 656 - 662
  • [49] Fault diagnosis for wind turbine planetary gearboxes via demodulation analysis based on ensemble empirical mode decomposition and energy separation
    Feng, Zhipeng
    Liang, Ming
    Zhang, Yi
    Hou, Shumin
    RENEWABLE ENERGY, 2012, 47 : 112 - 126
  • [50] Thermal Analysis of Vegetable Insulation Oil for Hermetically Sealed Wind Turbine Transformer
    Lee, Sungwon
    Lee, Joon-Yeob
    Kim, Jun-Su
    Woo, Jae-Hi
    Kim, Dong-Hae
    TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS B, 2012, 36 (01) : 97 - 102
12345