Fabrication of highly ordered porous nickel oxide anode materials and their electrochemical characteristics in lithium storage

被引:0
|
作者
机构
[1] [1,Miao, Fengjuan
[2] Li, Qianqian
[3] 2,Tao, Bairui
[4] Chu, Paul K.
来源
Tao, B. (tbr_sir@163.com) | 1600年 / Elsevier Ltd卷 / 594期
关键词
The structure and electrochemical properties of silicon microchannel plates (MCP)-supported NiO nanocomposites (NiO/Si-MCP) synthesized by silicon micromachining; electroless plating; and thermal annealing are investigated as anodes in lithium ion batteries. Galvanostatic charge and discharge results indicate that the NiO/Si-MCP is capable of delivering a higher capacity than the bare nickel-oxide film. At a 1 C current; the NiO/Si-MCP nanocomposite film shows an enormous first discharge capacity of about 3190 mA g-1 and charge capacity of 1977 mA g-1. After 15 cycles; the NiO/Si-MCP nanocomposite retains a reversible capacity of 1531 mA g-1 with 63.7% of the capacity maintained in the 2nd cycle. The lithium storage capacity is maintained at ∼880 mA h g-1 after 50 discharge/charge cycles and it is much larger than that of NiO and its composites. The enhanced electrochemical performance of the highly ordered three-dimensional materials is attributed to the synergistic effects offered by the silicon microchannel plates in the nickel oxide film subsequently facilitating electrolyte penetration; diffusion; and migration. The structure is promising anode materials in lithium-ion batteries. © 2014 Elsevier B.V. All rights reserved;
D O I
暂无
中图分类号
学科分类号
摘要
Journal article (JA)
引用
收藏
相关论文
共 50 条
  • [2] Fabrication of highly ordered porous nickel oxide anode materials and their electrochemical characteristics in lithium storage
    Miao, Fengjuan
    Li, Qianqian
    Tao, Bairui
    Chu, Paul K.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 594 : 65 - 69
  • [3] Fabrication of highly ordered porous nickel phosphide film and its electrochemical performances toward lithium storage
    Xiang, J. Y.
    Wang, X. L.
    Xia, X. H.
    Zhong, J.
    Tu, J. P.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2011, 509 (01) : 157 - 160
  • [4] Fabrication of Highly Ordered Porous Nickel Phosphide Films and Their Application as Anode for Lithium Ion Batteries
    Xiang, Jiayuan
    Tu, Jiangping
    Xia, Xinhui
    Zhang, Li
    Zhou, Yun
    Shi, Shaojun
    INEC: 2010 3RD INTERNATIONAL NANOELECTRONICS CONFERENCE, VOLS 1 AND 2, 2010, : 972 - 973
  • [5] Nickel Oxide Nanoparticles/Ordered Mesoporous Carbon Nanocomposites as Anode Materials for Lithium-Ion Battery with Improved Electrochemical Performance
    Li, Zhaoqiang
    Wang, Liang
    Ge, Xiaoli
    Ge, Hongwei
    Yin, Longwei
    SCIENCE OF ADVANCED MATERIALS, 2014, 6 (10) : 2089 - 2097
  • [6] Electrochemical energy storage in ordered porous carbon materials
    Vix-Guterl, C
    Frackowiak, E
    Jurewicz, K
    Friebe, M
    Parmentier, J
    Béguin, F
    CARBON, 2005, 43 (06) : 1293 - 1302
  • [7] Hierarchically ordered porous nickel oxide array film with enhanced electrochemical properties for lithium ion batteries
    Yuan, Y. F.
    Xia, X. H.
    Wu, J. B.
    Yang, J. L.
    Chen, Y. B.
    Guo, S. Y.
    ELECTROCHEMISTRY COMMUNICATIONS, 2010, 12 (07) : 890 - 893
  • [8] Lithium Storage Characteristics and Electrochemical Performance of Si-Sb-Ag Composite Anode Materials
    Wang, Yang
    Zhang, Peixin
    Wang, Jingwei
    Li, Yongliang
    Ren, Xiangzhong
    INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2015, 10 (11): : 9652 - 9665
  • [9] Preparation and electrochemical properties of nanometer nickel oxide anode materials
    Mi Z.
    1600, Scientific and Technological Corporation (27): : 296 - 302
  • [10] Formation of ordered macroporous ZnFe2O4 anode materials for highly reversible lithium storage
    Kim, Jong Guk
    Noh, Yuseong
    Kim, Youngmin
    Lee, Seonhwa
    Kim, Won Bae
    CHEMICAL ENGINEERING JOURNAL, 2019, 372 : 363 - 372