Study on Regional Continuous Energy Control Scanning Method for Selective Laser Melting

被引：0
|
作者：
Qin L. [1 ]
Zhang L. [1 ]
Wang S. [1 ]
Tang M. [2 ]
Shi Y. [1 ]
机构：
[1] School of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan
[2] School of Machinery and Automation, Wuhan University of Science and Technology, Wuhan
来源：
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2024年 / 60卷 / 01期
关键词：
energy control; fabricating quality; overhang structure; scan strategy; selective laser melting;
D O I：
10.3901/JME.2024.01.159
中图分类号：
学科分类号：
摘要：
Aiming at the forming quality problems such as warpage and dross in the overhanging structural parts formed by selective laser melting (SLM), the solidified solid and powder in the forming process are studied based on the heat transfer difference in local area and the heat transfer between layers. The effect of the distribution on the temperature distribution to optimize the forming of the drape. An energy regulation optimization model driven by part geometric information is established. By identifying the geometric features of the model, the energy impact factor is calculated according to the proportion of solidified solids and material powder in the local area, and the localization of variable process parameters based on software adaptive adjustment is realized. Quantitative scanning, and finally realize the continuous regulation of regional energy and process optimization. A typical overhanging part is selected for 316L material printing experiment as a verification. The results show that compared with the unoptimized ordinary scanning scheme, the optimized scanning scheme based on software automatic energy regulation can improve the forming quality of overhanging structural parts with an inclination angle of less than 45°, and the forming quality of 40° When suspending structural parts, the Sa (Surface Average Roughness) of the suspending surface formed with variable parameters reaches 24.03 μm, which is 46.32 μm compared with the Sa formed with fixed parameters, and the surface finish is significantly improved; at the same time, it can be formed with a span of 8 mm horizontal overhang without support. © 2024 Chinese Mechanical Engineering Society. All rights reserved.
引用
收藏
页码：159 / 169
页数：10
相关论文
共 23 条
  • [11] LIU Tingting, ZHANG Changdong, LIAO Wenhe, Et al., Experimental analysis of pool behavior in overhang structure fabricated by selective laser melting[J], Chinese Journal of Lasers, 43, 12, pp. 76-82, (2016)
  • [12] SUBEDI S C，, SHAHBA A, THEVAMARAN M, Et al., Towards the optimal design of support structures for laser powder bed fusion-based metal additive manufacturing via thermal equivalent static loads[J], Additive Manufacturing, 57, (2022)
  • [13] WANG Zhiping, ZHANG Yicha, BERNARD A., Lightweight porous support structure design for additive manufacturing via knowledge-based bio-inspired volume generation and lattice configuration[J], Virtual and Physical Prototyping, 17, 4, pp. 894-918, (2022)
  • [14] WEBER S, MONTERO J, BLECKMANN M, Et al., Parametric design optimisation of tree-like support structure for the laser-based powder bed fusion of metals[J], Journal of Manufacturing Processes, 84, pp. 660-668, (2022)
  • [15] AO Xiaohui, LIU Jianhua, XIA Huanxiong, Et al., A review of meso-micro modeling and simulation methods of selective laser melting process[J], Journal of Mechanical Engineering, 58, 5, pp. 239-257, (2022)
  • [16] STRANO G，, HAO L, EVERSON R M，, Et al., A new approach to the design and optimisation of support structures in additive manufacturing[J], The International Journal of Advanced Manufacturing Technology, 66, 9, pp. 1247-1254, (2013)
  • [17] Yurong LI, DONG Fuguo, Yan LIU, Et al., Straight line generation algorithm based on pixel line[J], Journal of Image and Graphics, 16, 10, pp. 1896-1899, (2011)
  • [18] FORSLUND R, SNIS A, LARSSON S., Analytical solution for heat conduction due to a moving Gaussian heat flux with piecewise constant parameters[J], Applied Mathematical Modelling, 66, pp. 227-240, (2019)
  • [19] ROMBOUTS M, FROYEN L, GUSAROV A V, Et al., Photopyroelectric measurement of thermal conductivity of metallic powders[J], Journal of Applied Physics, 97, (2005)
  • [20] WANG Senlin, ZHANG Lichao, CAI Chao, Et al., Field-driven data processing paradigm for multi-information additive manufacturing[J], Additive Manufacturing, 61, (2023)
123