Design and coupled thermo-mechanical analysis of silicon carbide primary mirror assembly

被引：0
|
作者：
Han, Yuan-Yuan [1 ]
Zhang, Yu-Min [1 ]
Han, Jie-Cai [1 ]
机构：
[1] Center for Composite Materials, Harbin Institute of Technology, Harbin 150080, China
来源：
Chinese Journal of Aeronautics | 2006年 / 19卷 / SUPPL.期
关键词：
Based on the principle that the thermal expansion coefficient of the support structure should match that of the mirror; three schemes of primary mirror assembly were designed. Of them; the first is fused silica mirror plus 4J32 flexible support plus ZTC4 support back plate; the second K9 mirror plus 4J45 flexible support plus ZTC4 support back plate; and the third SiC mirror plus SiC rigid support back plate. A coupled thermo-mechanical analysis of the three primary mirror assemblies was made with finite element method. The results show that the SiC assembly is the best of all schemes in terms of their combination properties due to its elimination of the thermal expansion mismatch between the materials. The analytical results on the cryogenic property of the SiC primary mirror assembly show a higher surface finish of the SiC mirror even under the cryogenic condition;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
相关论文
共 50 条
  • [41] Thermo-mechanical coupled problems at finite strains
    Vaz, M.
    Muñoz-Rojas, P.A.
    Lange, M.R.
    Stahlschmidt, J.
    Defect and Diffusion Forum, 2008, 283-286 : 515 - 520
  • [42] Thermo-Mechanical Coupled Problems at Finite Strains
    Vaz, M., Jr.
    Munoz-Rojas, P. A.
    Lange, M. R.
    Stahlschmidt, J.
    DIFFUSION IN SOLIDS AND LIQUIDS IV, 2009, 283-286 : 515 - 520
  • [43] A fully coupled thermo-mechanical micromechanics model
    Williams, TO
    Aboudi, J
    JOURNAL OF THERMAL STRESSES, 1999, 22 (09) : 841 - 873
  • [44] Thermo-Mechanical Stress Analysis
    Niehoff, Katrin
    Schreier-Alt, Thomas
    Schindler-Saefkow, Florian
    Ansorge, Frank
    Kittel, Hartmut
    2009 EUROPEAN MICROELECTRONICS AND PACKAGING CONFERENCE (EMPC 2009), VOLS 1 AND 2, 2009, : 497 - +
  • [45] Thermo-Mechanical Materials Analysis
    Kostial, Pavol
    Ruziak, Ivan
    Jonsta, Zdenek
    Tvrdy, Miroslav
    DIFFUSION IN SOLIDS AND LIQUIDS V, PTS 1 AND 2, 2010, 297-301 : 30 - +
  • [46] Ultralightweight silicon carbide mirror design
    Ealey, MA
    Wellman, JA
    ADVANCED MATERIALS FOR OPTICS AND PRECISION STRUCTURES, 1996, 2857 : 73 - 77
  • [47] A novel method of thermo-mechanical coupled analysis based on the unified description
    Cui, Ya-Qi
    Yu, Zu-Qing
    Lan, Peng
    MECHANISM AND MACHINE THEORY, 2019, 134 : 376 - 392
  • [48] Coupled thermo-mechanical analysis for slope behavior during freezing and thawing
    Ishikawa, T.
    Miura, S.
    Akagawa, S.
    Sato, M.
    Kawamura, S.
    PREDICTION AND SIMULATION METHODS FOR GEOHAZARD MITIGATION, 2009, : 409 - +
  • [49] Coupled thermo-mechanical FEM analysis of twist compression deformation process
    Xue, KM
    Zhang, ZR
    Xia, YJ
    Lu, Y
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 1997, 7 (04) : 102 - 106
  • [50] A New Method for Coupled Thermo-mechanical Field Analysis of Operational Conductors
    Xiao, Kai
    Chen, Zhi-wei
    Zhou, Hua-min
    Mo, Lu-Ye
    Li, Peng-Yun
    INTERNATIONAL CONFERENCE ON SUSTAINABLE ENERGY AND ENVIRONMENT PROTECTION (ICSEEP 2015), 2015, : 555 - 560
12345