Design and coupled thermo-mechanical analysis of silicon carbide primary mirror assembly

被引：0
|
作者：
Han, Yuan-Yuan [1 ]
Zhang, Yu-Min [1 ]
Han, Jie-Cai [1 ]
机构：
[1] Center for Composite Materials, Harbin Institute of Technology, Harbin 150080, China
来源：
Chinese Journal of Aeronautics | 2006年 / 19卷 / SUPPL.期
关键词：
Based on the principle that the thermal expansion coefficient of the support structure should match that of the mirror; three schemes of primary mirror assembly were designed. Of them; the first is fused silica mirror plus 4J32 flexible support plus ZTC4 support back plate; the second K9 mirror plus 4J45 flexible support plus ZTC4 support back plate; and the third SiC mirror plus SiC rigid support back plate. A coupled thermo-mechanical analysis of the three primary mirror assemblies was made with finite element method. The results show that the SiC assembly is the best of all schemes in terms of their combination properties due to its elimination of the thermal expansion mismatch between the materials. The analytical results on the cryogenic property of the SiC primary mirror assembly show a higher surface finish of the SiC mirror even under the cryogenic condition;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
相关论文
共 50 条
  • [1] Design and Coupled Thermo-Mechanical Analysis of Silicon Carbide Primary Mirror Assembly
    HAN Yuan-yuan*
    Chinese Journal of Aeronautics, 2006, (S1) : 62 - 65
  • [2] Coupled Thermo-Mechanical Analysis of Mass Reduced Silicon Micromirrors
    Hall, Harris J.
    Schmidt, Jason
    Starman, LaVern
    2018 19TH INTERNATIONAL CONFERENCE ON THERMAL, MECHANICAL AND MULTI-PHYSICS SIMULATION AND EXPERIMENTS IN MICROELECTRONICS AND MICROSYSTEMS (EUROSIME), 2018,
  • [3] The Thermo-Mechanical Couple Analysis Base on Assembly
    Hu, Guichuan
    Liu, Jinghua
    MATERIALS SCIENCE AND MECHANICAL ENGINEERING, 2014, 467 : 416 - 419
  • [4] Sensitivity analysis and shape optimization for preform design in thermo-mechanical coupled analysis
    Gao, ZY
    Grandhi, RV
    INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, 1999, 45 (10) : 1349 - 1373
  • [5] Optimum design of lightweight silicon carbide mirror assembly
    Han Yuanyuan
    Zhang Yumin
    Han Jiecai
    Zhang Jianhan
    Wang, Yao
    Zhou Yufeng
    JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2008, 23 (02): : 259 - 262
  • [6] Optimum Design of Lightweight Silicon Carbide Mirror Assembly
    HAN Yuanyuan ZHANG Yumin HAN Jiecai ZHANG Jianhan YAO Wang ZHOU Yufeng (Center for Composite Materials
    Journal of Wuhan University of Technology(Materials Science), 2008, (02) : 259 - 262
  • [7] Optimum design of lightweight silicon carbide mirror assembly
    Yuanyuan Han
    Yumin Zhang
    Jiecai Han
    Jianhan Zhang
    Wang Yao
    Yufeng Zhou
    Journal of Wuhan University of Technology-Mater. Sci. Ed., 2008, 23 : 259 - 262
  • [8] Coupled Thermo-Mechanical Analysis of Charles Bridge
    Krejci, T.
    Sejnoha, J.
    PROCEEDINGS OF THE INTERNATIONAL CONFERENCE OF NUMERICAL ANALYSIS AND APPLIED MATHEMATICS 2014 (ICNAAM-2014), 2015, 1648
  • [9] Coupled thermo-mechanical analysis for plastic thermoforming
    Song, YH
    Zang, KF
    Wang, ZR
    Diao, FX
    Yan, YN
    Zhang, RJ
    POLYMER ENGINEERING AND SCIENCE, 2000, 40 (08): : 1736 - 1746
  • [10] Analysis and design of thermo-mechanical interfaces
    Dems, K.
    Mroz, Z.
    BULLETIN OF THE POLISH ACADEMY OF SCIENCES-TECHNICAL SCIENCES, 2012, 60 (02) : 205 - 213
12345