Influence of silica nanofiller on the isothermal crystallization and melting of polyurethane elastomer

被引：0

作者：

机构：

[1] Blagojevic, Sanja Lučic

[2] Buhin, Zrinka

[3] Igrec, Ivona

来源：

Blagojevic&die;, S.L. (slucic@fkit.hr) | 1600年 / John Wiley and Sons Inc卷 / 129期

关键词：

In this article; isothermal crystallization kinetic of the linear hydroxyl polyester urethane (PUR); as well as influence of amorphous silica nanofiller; was investigated. With the aim to investigate the influence of filler surface modification on the crystallization process of polyurethane matrix; nonmodified silica; as well as silica modified with methacrylsilane and octylsilane; were used as fillers for PUR composite preparation. The crystallization kinetics depending on temperature of the isothermal crystallization and volume fraction of filler by using differential scanning calorimetry (DSC) were investigated. The measurements at temperatures 7; 12; and 17°C for PUR and composites with 0.5; 1; 2; and 4 vol % of filler were done. Kinetic parameters of the isothermal crystallization n and K were determined according to Avrami model. Melting of the isothermally crystallized samples was also investigated. Results of the research indicate that by increasing the isothermal crystallization temperature; the crystallization rate of the PUR soft phase decreases and that the perfection of the crystallites is improved. By addition of all fillers up to ≈1 vol %; the crystallization rate increases; however; addition of a higher amount of the filler significantly decreases the crystallization rate. It was found that surface modification can significantly affect crystallization rate and that the nucleation efficiency of silica increases in the following order: methacrylsilane-modified silica;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Journal article (JA)

引用

共 50 条

[31] Nano-silica Induced Crystallization in Polyurethane Elastomers
Yu, Shen
Zhang, Rong-chun
Sun, Ping-chuan
ACTA POLYMERICA SINICA, 2014, (01) : 72 - 79
[32] Isothermal crystallization and subsequent melting behavior of poly(ethylene terephthalate)/silica nanocomposites (vol 194, pg 205, 2007)
Tian, X. Y.
Ruan, C. J.
Cui, P.
Liu, W. T.
Zheng, J.
Zhang, X.
Yao, X. Y.
Zheng, K.
Li, Y.
CHEMICAL ENGINEERING COMMUNICATIONS, 2007, 194 (07) : 994 - 994
[33] Melting behavior and isothermal crystallization kinetics of PP/mLLDPE blends
Jianglei Qin
Shaoqiang Guo
Zhiting Li
Journal of Polymer Research, 2008, 15 : 413 - 420
[34] EFFECTS OF PRE-MELTING CONDITIONS ON ISOTHERMAL CRYSTALLIZATION OF POLYPROPYLENE
IKUSHIMA, K
TANAKA, T
NOMOTO, G
KOBUNSHI KAGAKU, 1972, 29 (03) : 186 - 191
[35] Isothermal crystallization kinetics and melting behaviour of poly(ethylene terephthalate)
Lu, XF
Hay, JN
POLYMER, 2001, 42 (23) : 9423 - 9431
[36] Isothermal crystallization and melting behavior for novel cationic dyeable copolyester
Chen Bin
Gu Lixia
PROCEEDINGS OF 2009 INTERNATIONAL CONFERENCE ON ADVANCED FIBERS AND POLYMER MATERIALS, VOLS 1 AND 2, 2009, : 231 - 233
[37] Melting behavior and isothermal crystallization kinetics of PP/mLLDPE blends
Qin, Jianglei
Guo, Shaoqiang
Li, Zhiting
JOURNAL OF POLYMER RESEARCH, 2008, 15 (05) : 413 - 420
[38] Crystallization and Melting Behaviors of Polylactic Acid/Thermoplastic Polyurethane Blends
Shyr, Tien-Wei
Yang, Jung
Hu, Chun-Chieh
Wang, Jian-Ren
Tung, Chia-Hsin
ADVANCES IN TEXTILE ENGINEERING AND MATERIALS, 2013, 627 : 156 - 159
[39] Melting Behavior, Isothermal and Nonisothermal Crystallization Kinetics of Nylon 1111
Jiang, Tao
Liu, Minying
Fu, Peng
Wang, Yudong
Fang, Yunli
Zhao, Qingxiang
POLYMER ENGINEERING AND SCIENCE, 2009, 49 (07): : 1366 - 1374
[40] Surface Treatment of Silica Nanoparticles and the Characteristics of their Composites with Thermoplastic Polyurethane Elastomer
Yoo, Sun Hwa
Song, Hyun Jae
Kim, Chang Keun
POLYMER-KOREA, 2012, 36 (06) : 721 - 726

← 1 2 3 4 5 →