Three-Dimensional Structural Analysis of Sea Temperature During Typhoon Transit

被引:0
|
作者
Yao, Lingxiang [1 ,2 ,3 ,4 ]
Fu, Yanzhao [1 ,2 ,3 ,4 ]
Wu, Tao [1 ,2 ,3 ,4 ]
Guo, Junru [1 ,2 ,3 ,4 ]
Shi, Fei [1 ,2 ,3 ,4 ]
机构
[1] Operational Oceanography Institution (OOI), Dalian Ocean University, Dalian,116023, China
[2] School of Marine Science and Environment Engineering, Dalian Ocean University, Dalian,116023, China
[3] Liaoning Key Laboratory of Marine Real–Time Marine Environmental Monitoring, Dalian,116023, China
[4] Dalian Technology Innovation Center for Operational Oceanography, Dalian,116023, China
关键词
Tropical cyclone;
D O I
10.3390/w16243641
中图分类号
学科分类号
摘要
This study uses the Finite-Volume Community Ocean Model (FVCOM) to simulate the hydrodynamic processes during typhoon Saola. The simulation results closely match observed data. Typhoon Saola was a major system in the Pacific typhoon season, highlighting the complexity and uncertainty of tropical cyclone dynamics. By analyzing historical sea surface temperature data and the typhoon’s trajectory, the three-dimensional response of sea temperature during typhoon Saola was explored. The key findings are as follows: 1. Typhoon passage affects both coastal and deep-sea warming and cooling. Temperature changes are more pronounced near the coast, with the highest warming and cooling occurring within five days after the typhoon. In deep-sea areas, the highest warming occurs within five days, while the lowest cooling occurs within two days. 2. The nearshore water layers respond quickly to the typhoon, while the deep-sea water layers primarily respond in the middle depths, with a delayed effect. 3. In coastal shallow waters, the response is intense, with the maximum temperature increase and decrease occurring near the bottom, reaching 5.26 °C and −5.17 °C, respectively. In deep-sea areas, the response is weaker, with the maximum temperature change occurring near the surface: an increase of 0.49 °C and a decrease of −0.98 °C. The deepest response in coastal waters reaches about 80 m, while in the deep-sea area, it only reaches 50 m due to the thicker mixed layer. © 2024 by the authors.
引用
收藏
相关论文
共 50 条
  • [31] Analysis on three-dimensional structural integrity of a free loading mixed grain under low temperature environment
    School of Mechano-Electronics Engineering, Beijing Institute of Technology, Beijing 100081, China
    Guti Houjian Jishu, 2007, 1 (34-38):
  • [33] Three-dimensional calculations of the currents in the Huanghai Sea and East China Sea during June of 1999
    Wang, HQ
    Yuan, YC
    Liu, YG
    Zhou, MY
    ACTA OCEANOLOGICA SINICA, 2003, 22 (03) : 333 - 349
  • [34] Three-Dimensional Temperature and Thermal Stress Analysis of an Inhomogeneous Layer
    Tokovyy, Yuriy
    Ma, Chien-Ching
    JOURNAL OF THERMAL STRESSES, 2013, 36 (08) : 790 - 808
  • [35] Three-dimensional temperature field analysis of hybrid journal bearing
    Fu, Yanli
    Zhu, Jun
    Run Hua Yu Mi Feng/Lubrication Engineering, 2006, (02): : 115 - 117
  • [36] THREE-DIMENSIONAL NUMERICAL SIMULATION OF COHESIVE SEDIMENT TRANSPORT DUE TO A TYPHOON
    Zhang, Na
    Yang, Hua
    Yan, Bing
    Zhao, Hongbo
    PROCEEDINGS OF THE 6TH INTERNATIONAL CONFERENCE ON APAC 2011, 2012,
  • [37] A three-dimensional numerical simulation of Typhoon Holly in the northwestern Pacific Ocean
    Hong, CH
    Yoon, JH
    JOURNAL OF GEOPHYSICAL RESEARCH-OCEANS, 2003, 108 (C8)
  • [38] Improving seismic remote sensing of typhoon with a three-dimensional Earth model
    Fang, Sunke
    Lin, Jianmin
    Ni, Sidao
    Li, Xiaofeng
    Xu, Xiaoqing
    Zheng, Hong
    Xu, Wen
    JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 2020, 148 (02): : 478 - 491
  • [39] Three-dimensional structure of interannual-to-decadal variations in water temperature in the Yellow sea during 1998-2021
    Zhai, Fangguo
    Yu, Bing
    Dong, Yujie
    Gu, Yanzhen
    Liu, Zizhou
    Li, Peiliang
    CLIMATE DYNAMICS, 2025, 63 (01)
  • [40] Three-dimensional stress analysis by three-dimensional local hybrid method
    Machida, K
    FRACTURE AND STRENGTH OF SOLIDS VI, PTS 1 AND 2, 2006, 306-308 : 523 - 528