Optimum design of spherical metamorphic mechanism used for bionic joint based on prescribed workspace

被引：0
|
作者：
机构：
[1] Jin, Guoguang
[2] Wang, Yan
[3] Song, Yimin
[4] Chang, Boyan
[5] Liang, Dong
来源：
Jin, G. (jinguoguang@tjpu.edu.cn) | 1600年 / Chinese Society of Agricultural Machinery卷 / 44期
关键词：
Inverse kinematics - Jacobian matrices - Mechanisms - Bionics - Inverse problems;
D O I：
10.6041/j.issn.1000-1298.2013.12.048
中图分类号：
学科分类号：
摘要：
A novel bionic joint spherical metamorphic mechanism was analyzed. It consisted of a base platform, moving platform, three circle legs and one middle metamorphic leg had two configurations named configuration 1 (normal configuration) and configuration 2 (metamorphic configuration). The metamorphic mechanism can transform normal configuration to metamorphic configuration with the change of middle leg. Firstly, kinematic equation was established, and the solutions to inverse kinematic and velocity Jacobian matrix were given. Then the relationship between workspace and links length was discussed based on inverse kinematic solutions. According to regular pattern, the workspace of the mechanism was optimized and the default workspace was determined. Finally, the optimization of links length was given based on the evaluation of payload capacity index and stiffness index for a prescribed workspace. The size ranges of links were respectively obtained when each performance index at a better level. The best design size of the mechanism was obtained based on the comprehensive two indexes.
引用
收藏
相关论文
共 50 条
  • [1] Optimum design of spherical parallel manipulators for a prescribed workspace
    Bai, Shaoping
    MECHANISM AND MACHINE THEORY, 2010, 45 (02) : 200 - 211
  • [2] Workspace analysis in the design parameter space of a 2-DOF spherical parallel mechanism for a prescribed workspace: Application to the otologic surgery
    Chablat, Damien
    Michel, Guillaume
    Bordure, Philippe
    Venkateswaran, Swaminath
    Jha, Ranjan
    MECHANISM AND MACHINE THEORY, 2021, 157
  • [3] Kinematic and Dynamic Analysis of a 3PUS-S(P) Parallel Metamorphic Mechanism Used for Bionic Joint
    Chang, Boyan
    Jin, Guoguang
    ADVANCES IN RECONFIGURABLE MECHANISMS AND ROBOTS II, 2016, 36 : 471 - 480
  • [4] Mechanism design of spherical 5r parallel manipulator based on workspace
    Zhang, Lijie
    Niu, Yuewei
    Li, Yongquan
    Huang, Zhen
    Jixie Gongcheng Xuebao/Chinese Journal of Mechanical Engineering, 2007, 43 (02): : 55 - 59
  • [5] Structure design and workspace analysis of 3-RRR+(S-P) bionic joint mechanism with offset output
    Yang, Long
    Qiu, Xuesong
    Hou, Yulei
    Zhou, Yulin
    Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery, 2015, 46 (03): : 366 - 371
  • [6] Design and analysis of variable stiffness bionic flexible joint based on cam mechanism
    Li M.
    Ma Y.
    Zhang M.
    Zhang J.
    Yi Qi Yi Biao Xue Bao/Chinese Journal of Scientific Instrument, 2019, 40 (02): : 213 - 222
  • [7] Design of Bionic Knee Joint Structure Based on the Dynamics of Double Rocker Mechanism
    Xiao, Tianshuo
    ADVANCED INTELLIGENT TECHNOLOGIES FOR INDUSTRY, 2022, 285 : 307 - 312
  • [8] Operation Mode and Workspace of a 3-rRPS Metamorphic Parallel Mechanism with a Reconfigurable Revolute Joint
    Nurahmi, Latifah
    Gan, Dongming
    2018 INTERNATIONAL CONFERENCE ON RECONFIGURABLE MECHANISMS AND ROBOTS (REMAR), 2018,
  • [9] Design and Analysis of Actuated Metamorphic Parallel Spherical Joint of Three Configurations
    Hu X.
    Liu H.
    Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery, 2019, 50 (09): : 421 - 426
  • [10] A multi-objective optimum design of general 3R manipulators for prescribed workspace limits
    Ceccarelli, M
    Lanni, C
    MECHANISM AND MACHINE THEORY, 2004, 39 (02) : 119 - 132
12345