Constitutive modeling of transformation-induced plasticity steels considering strength-differential effect

被引：0
|
作者：
Jung, Jaebong [1 ,2 ]
Park, Hyeonil [3 ]
Lee, Seung Wook [1 ]
Kim, Ji Hoon [1 ]
机构：
[1] School of Mechanical Engineering, Pusan National University, 2 Busandaehak-ro 63beon-gil, Busan,46241, Korea, Republic of
[2] Safety Performance CAE Team, Hyundai Motor Company, Gyeonggi-do, Hawseong-si,18270, Korea, Republic of
[3] Korea Institute of Materials Science, 797 Changwondaero, Gyeongnam, Changwon,51508, Korea, Republic of
来源：
Mechanics of Materials | 2025年 / 200卷
关键词：
Transformation Induced Plasticity steel;
D O I：
10.1016/j.mechmat.2024.105207
中图分类号：
学科分类号：
摘要：
Transformation-induced plasticity (TRIP) steels undergo martensitic phase transformations due to their austenite phase. In this study, using 1-mm-thick TRIP steel at room temperature, the phase transformation behaviors under tensile and compressive modes were measured using a ferrite scope based on the detection of the magnetic volume. A strength differential (SD) effect was observed, where the tensile strength was lower than the compressive strength. The rate of tensile transformation was faster than that of compressive transformation. To account for the SD effect in finite element analysis, a martensitic kinetics-based constitutive model was developed, which was decomposed into elastic, plastic, Bain, and transformational parts. A larger transformational strain was generated in the tensile mode, and the asymmetric SD effect was captured well by the proposed model. © 2024 Elsevier Ltd
引用
收藏
相关论文
共 50 条
  • [31] Enhancement of the strength-ductility combination of twinning-induced/transformation-induced plasticity steels by reversion annealing
    Berrenberg, Frederike
    Haase, Christian
    Barrales-Mora, Luis A.
    Molodov, Dmitri A.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 681 : 56 - 64
  • [32] ANN Model to predict the bake hardenability of Transformation-Induced Plasticity steels
    Barcellona, A.
    Palmeri, D.
    Riccobono, R.
    MATERIALS CHARACTERISATION IV: COMPUTATIONAL METHODS AND EXPERIMENTS, 2009, 64 : 33 - 44
  • [33] On the sources of work hardening in multiphase steels assisted by transformation-induced plasticity
    Jacques, P
    Furnémont, Q
    Mertens, A
    Delannay, F
    PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS AND MECHANICAL PROPERTIES, 2001, 81 (07): : 1789 - 1812
  • [34] Grain size effects in multiphase steels assisted by transformation-induced plasticity
    Turteltaub, S.
    Suiker, A. S. J.
    INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2006, 43 (24) : 7322 - 7336
  • [35] Crystallographically based model for transformation-induced plasticity in multiphase carbon steels
    Tjahjanto, D. D.
    Turteltaub, S.
    Suiker, A. S. J.
    CONTINUUM MECHANICS AND THERMODYNAMICS, 2008, 19 (07) : 399 - 422
  • [36] Crystallographically based model for transformation-induced plasticity in multiphase carbon steels
    D. D. Tjahjanto
    S. Turteltaub
    A. S. J. Suiker
    Continuum Mechanics and Thermodynamics, 2008, 19 : 399 - 422
  • [37] Analysis of banded microstructures in multiphase steels assisted by transformation-induced plasticity
    Yadegari, S.
    Turteltaub, S.
    Suiker, A. S. J.
    Kok, P. J. J.
    COMPUTATIONAL MATERIALS SCIENCE, 2014, 84 : 339 - 349
  • [38] Transformation-induced plasticity (TRIP)
    Univ of Mining and Metallurgy, Leoben, Austria
    Appl Mech Rev, 6 (317-364):
  • [39] Medium Mn transformation-induced plasticity steels: Recent progress and challenges
    Suh, Dong-Woo
    Kim, Sung-Joon
    SCRIPTA MATERIALIA, 2017, 126 : 63 - 67
  • [40] Effect of substitution of Si by Al on the microstructure and mechanical properties of bainitic transformation-induced plasticity steels
    Kangying Zhu
    Coralie Mager
    Mingxin Huang
    Journal of Materials Science & Technology, 2017, 33 (12) : 1475 - 1486
12345