Fire resistance of repaired components by polymer-modified cement mortar

被引：0

作者：

Hamasaki H. ^{[1
]}

Motegi T. ^{[2
]}

Noguchi T. ^{[3
]}

Wang D. ^{[4
]}

Kim H. ^{[3
]}

机构：

[1] Dept. of Building Materials and Components, Building Research Institute

[2] Dept. of Fire Safety, Building Research Institute

[3] Dept.of Arch., GraduateSchool of Eng., Univ.of Tokyo

[4] Iron and Steel Products Business Unit, Mitsui and Co., Ltd

来源：

Journal of Structural and Construction Engineering | 2010年 / 75卷 / 652期

关键词：

Adhesive Strength; Fire Test; Monolithic Property; Polymer Modified Cement Mortar; Section Repair; Temperature Distribution;

D O I：

10.3130/aijs.75.1065

中图分类号：

学科分类号：

摘要：

This paper deals with the fire resistance of repaired components by polymer-modified cement mortar. The experiment examine fire test for two hours, confirmed the damage conditions and the temperature distribution of repair sections, and adhesive strength. As the result, the monolithic property of repair section depends on its size and thickness, the case of large and thin is relatively danger. The temperature distribution in the repair section is relatively low compared with an ordinary concrete and mortar, so harmful influence to the structural safety in fire is low from the viewpoint of the temperature of the reinforcing bar.

引用

页码：1065 / 1071

页数：6

共 50 条

[41] POLYMER-MODIFIED CEMENT ASPHALT MORTAR AS INTERLAYER IN THE NON-BALLASTED TRACK OF HIGH-SPEED TRAIN
Erlangga, Aditya Wahyu
Suparma, Latif Budi
Siswosukarto, Suprapto
INTERNATIONAL JOURNAL OF GEOMATE, 2024, 26 (115): : 18 - 26
[42] Study on High Performance Polymer-Modified Cement Grouts
Anagnostopoulos, Costas A.
Dimitriadi, Melina
CIVILENG, 2021, 2 (01): : 134 - 157
[43] THE INTERFACE BETWEEN POLYMER-MODIFIED CEMENT PASTE AND AGGREGATES
SU, Z
LARBI, JA
BIJEN, JMJM
CEMENT AND CONCRETE RESEARCH, 1991, 21 (06) : 983 - 990
[44] Effectiveness of polymer-modified cement mortar with corrosion inhibitor in preventing chloride-induced steel corrosion in concrete
Civil Eng. Res. and Planning Dept., Quest Engineer Co., Ltd., Ekinishihon-machi, Kanazawa, 920-0025, Japan
不详
1600, 1075-1081 (September 2003):
[45] Shrinkage properties of polymer-modified cement mortars (PCM)
Bode K.A.
Dimmig-Osburg A.
Key Engineering Materials, 2011, 466 : 29 - 36
[46] Rheological measurements on fresh polymer-modified cement pastes
1600, Publ by E. & F.N. Spon, London, Engl
[47] Mechanical, electrical and waterproof properties of polymer-modified carbon fiber-carbon black conductive cement mortar
Li, Min
Xu, Xuan
Zhao, Jian
Gao, Peiwei
Zhou, Yong
MATERIALS LETTERS, 2025, 385
[48] Polymer-modified mortar with a gradient polymer distribution: Preparation, permeability, and mechanical behaviour
Kong, Xiang-Ming
Wu, Chun-Chao
Zhang, Yan-Rong
Li, Jiao-Li
CONSTRUCTION AND BUILDING MATERIALS, 2013, 38 : 195 - 203
[49] Polymer-modified sulphoaluminate cement-based mortar anode and its optimal arrangement for electrochemical chloride extraction
Jin, Zuquan
Li, Shicai
Li, Zhe
Li, Shupeng
CONSTRUCTION AND BUILDING MATERIALS, 2022, 348
[50] Characterization of polymer-modified cement as a solidification agent for the radwaste
Ji, Young-Yong
Kwak, Kyung-Kil
Hong, Dae-Seok
Ryu, Woo-Seog
ANNALS OF NUCLEAR ENERGY, 2012, 43 : 99 - 105

← 1 2 3 4 5 →