Axial mixing in a novel perforated plate bubble column

This investigation reports the experimental and theoretical results carried out to evaluate the axial dispersion number for an air-water system in a novel hybrid rotating and reciprocating perforated plate bubble column for single phase and two phase flow conditions. Axial dispersion studies are carried out using stimulus response technique. Sodium hydroxide solution is used as the tracer. Effects of superficial liquid velocity, agitation level and superficial gas velocity on axial dispersion number were analyzed and found to be significant. For the single phase (water) flow condition, it is found that the main variables affecting the axial dispersion number are the agitation level and superficial liquid velocity. When compared to the agitation level, the effect of superficial liquid velocity on axial dispersion number is more predominant. The increase in superficial liquid velocity decreases the axial dispersion number. The same trend is shown by agitation level but the effect is less. The rotational movement of the perforated plates enhances the radial mixing in the section; hence, axial dispersion number is reduced. For the two phase flow condition, the increase in superficial liquid velocity decreases the axial dispersion number, as reported in the single phase flow condition. The increase in agitation level decreases the axial dispersion number, but this decreasing trend is non-linear. An increase in superficial gas velocity increases the axial dispersion number. Correlations have been developed for axial dispersion number for single phase and two phase flow conditions. The correlation values are found to concur with the experimental values. Copyright © 2010 The Berkeley Electronic Press. All rights reserved.