Calculation method of crack width in reinforced concrete beams with skin reinforcement

被引:0
|
作者
Li, Zhihua [1 ,2 ]
Su, Xiaozu [1 ]
机构
[1] Department of Building Engineering, Tongji University, Shanghai 200092, China
[2] Department of Civil Engineering, Harbin Institute of Technology (Weihai), Weihai 264209, China
关键词
Reinforced concrete - Concrete beams and girders;
D O I
暂无
中图分类号
学科分类号
摘要
To investigate the cracking behavior of reinforced concrete beam with skin reinforcement, a test of eight rectangular section flexural members reinforced with 500 MPa steel bar was carried out. Test results suggest that the skin reinforcement can reduce average crack spacing by 30% to 50% and short-time maximum crack width by 29% to 70%. The effect of skin reinforcement on average crack spacing and average crack width is analyzed based on the test results. A short-time maximum crack width formula concerning the skin reinforcement is put forward that takes into account the crack width formula adopted in the code GB 50010-2002. The proposed calculation formulas agree with experimental results.
引用
收藏
页码:112 / 116
相关论文
共 50 条
  • [41] New Analytical Approach of Flexural Crack Width Estimation for Reinforced Concrete Beams
    Hong, Sungnam
    Ko, Won-Jun
    Park, Sun-Kyu
    ADVANCES IN STRUCTURAL ENGINEERING, 2013, 16 (10) : 1763 - 1777
  • [42] Advanced crack width analysis of reinforced concrete beams under repeated loads
    Oh, Byung Hwan
    Kim, Se Hoon
    JOURNAL OF STRUCTURAL ENGINEERING, 2007, 133 (03) : 411 - 420
  • [43] Influence of Specimen Width on Crack Propagation Process in Lightly Reinforced Concrete Beams
    Wang, Hongwei
    Jin, Hui
    Wu, Zhimin
    Zou, Baoping
    Zhang, Wang
    MATERIALS, 2024, 17 (22)
  • [44] Change of Internal Equilibrium and Crack Width in Time in Reinforced Concrete Beams.
    Destrebecq, J.-F
    Dyduch, K.
    Materials and Structures/Materiaux et Constructions, 1986, (110): : 123 - 130
  • [45] Calculation method of shirinkage crack width in reinforced concrete wall using bond-loss length
    Nakagawa, Takao
    Ohno, Yoshiteru
    Seo, Taeseok
    Journal of Structural and Construction Engineering, 2008, 73 (624): : 165 - 172
  • [46] Calculation of crack width of concrete components reinforced with steel fibres and reinforcing bars
    Empelmann, Martin
    Oettel, Vincent
    Cramer, Jonas
    BETON- UND STAHLBETONBAU, 2020, 115 (02) : 136 - 145
  • [47] Calculation method for crack width of reinforced UHPC direct tensile members
    Qiu M.
    Zhang Y.
    Shao X.
    Liu B.
    Qu S.
    Tao Z.
    Tang Y.
    Tumu Gongcheng Xuebao/China Civil Engineering Journal, 2023, 56 (08): : 47 - 59
  • [48] Crack Width and Propagation in Recycled Coarse Aggregate Concrete Beams Reinforced with Steel Fibres
    Ghalehnovi, Mansour
    Karimipour, Arash
    de Brito, Jorge
    Chaboki, Hamid Reza
    APPLIED SCIENCES-BASEL, 2020, 10 (21): : 1 - 27
  • [49] FLEXURAL CRACK WIDTH IN PRESTRESSED CONCRETE BEAMS
    MEIER, SW
    GERGELY, P
    JOURNAL OF THE STRUCTURAL DIVISION-ASCE, 1981, 107 (02): : 429 - 433
  • [50] Experimental and numerical study on the crack width and deflection performance of GFRP reinforced concrete beams
    Gouda, Omar
    Hassanein, Ahmed
    Galal, Khaled
    ENGINEERING STRUCTURES, 2023, 283