Mechanism of the tool flank wear influenced by the vibration characteristics of the toolholder system in high speed milling

被引：3
|
作者：
Liu, Anmin [1 ]
Shen, Hang [1 ]
Kruth, J.P. [2 ]
机构：
[1] Institute of Modern Manufacturing Technology, Hunan Institute of Technology, Hengyang 421002, China
[2] Faculty of Engineering, Katholieke Universiteit Leuven, Leuven 3001, Belgium
来源：
Jixie Gongcheng Xuebao/Chinese Journal of Mechanical Engineering | 2008年 / 44卷 / 04期
关键词：
D O I：
10.3901/JME.2008.04.063
中图分类号：
学科分类号：
摘要：
引用
收藏
页码：63 / 68
相关论文
共 50 条
  • [21] Tool wear characteristics in high-speed milling of graphite using a coated carbide micro endmill
    Zhou, L.
    Wang, C. Y.
    Qin, Z.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2009, 223 (03) : 267 - 277
  • [22] Tool Flank Wear Recognition Based on the Variation of Milling Force Vector in End Milling
    Hou, Yongfeng
    Zhang, Dinghua
    Luo, Ming
    Wu, Baohai
    2014 IEEE/ASME INTERNATIONAL CONFERENCE ON ADVANCED INTELLIGENT MECHATRONICS (AIM), 2014, : 1622 - 1627
  • [23] Tool wear characteristics of binderless CBN tools used in high-speed milling of titanium alloys
    Wang, ZG
    Rahman, A
    Wong, YS
    WEAR, 2005, 258 (5-6) : 752 - 758
  • [24] Experimental Study on Carbide Tool Wear Characteristics Test for High Speed Finish Milling Aluminum Blades
    Wang Xuehui
    Feng Mingjun
    Gao Zhiqiang
    Dai Mingjun
    ADVANCES IN FUNCTIONAL MANUFACTURING TECHNOLOGIES, 2010, 33 : 454 - +
  • [25] Research on the Characteristics of Chips and Tool Flank Wear in High-speed Rotary Ultrasonic Elliptical Machining for Side Milling of Ti-6Al-4V
    Liu J.
    Jiang X.
    Zhang D.
    Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2019, 55 (19): : 186 - 194
  • [26] Tool Vibration due to High Speed Micro End Milling Parameters
    Mohamed, A. R.
    Atiqah, N.
    Ali, M. Y.
    Chowdhury, M. S. H.
    ADVANCED MATERIALS DESIGN AND MECHANICS II, 2013, 372 : 364 - 368
  • [27] An investigation of tool temperature in end milling considering the flank wear effect
    Cui, Di
    Zhang, Dinghua
    Wu, Baohai
    Luo, Ming
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2017, 131 : 613 - 624
  • [28] Balancing of tool/toolholder assembly for high-speed machining
    Zhang, S
    Ai, X
    Tang, WX
    Liu, JG
    ADVANCES IN MATERIALS MANUFACTURING SCIENCE AND TECHNOLOGY, 2004, 471-472 : 542 - 546
  • [29] Modeling of Dynamic Cutting Force considering Flank Wear and Analysis of Tool Wear Mechanism in Milling 508III Steel
    Cheng, Yaonan
    Gai, Xiaoyu
    Guan, Rui
    Jin, Yingbo
    Lu, Mengda
    INTEGRATED FERROELECTRICS, 2023, 233 (01) : 1 - 18
  • [30] Milling tool's flank wear prediction by temperature dependent wear mechanism determination when machining Inconel 182 overlays
    Wang, Chengdong
    Ming, Weiwei
    Chen, Ming
    TRIBOLOGY INTERNATIONAL, 2016, 104 : 140 - 156
12345