Effect of TiC particle on grain growth of Al alloy in the semi-solid state

被引：0
|
作者：
Liu, Hui-Min [1 ]
Wang, Li-Da [1 ]
Zhang, Juan [1 ]
Yao, Qing-Hu [1 ]
He, Jing [1 ]
机构：
[1] School of Materials Science and Engineering, Inner Mongolia University of Technology, Huhehaote 010051, China
来源：
Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment | 2006年 / 27卷 / 04期
关键词：
Grain growth - Grain size and shape - Microstructure - Particles (particulate matter) - Scanning electron microscopy - Titanium carbide;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The microstructure of in-situ reactive liquidus cast 7075 + 2.5 vol% TiC Al alloy in the semi-solid state were observed using SEM. The grain sizes were measured using a mean linear intercept method and the effect of in-situ formed TiC particles on grain growth in the two-phase (liquid + solid) region of liquidus cast 7075 Al alloy were analyzed. The results show that the in-situ formed TiC particles can not only make the liquidus cast 7075 Al alloy with fine and equiaxed grains but also control evidently grain growth during reheating of the alloy. The average grain sizes of 7075 + 2.5 vol% TiC Al alloy decrease 30-40 μm compared to 7075 Al alloy when the alloys are reheated at 600°C for 5, 10, 30 min.
引用
收藏
页码：36 / 39
相关论文
共 50 条
  • [21] Semi-solid rheocasting of grain refined aluminum alloy 7075
    Curle, U. A.
    Govender, G.
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2010, 20 : S832 - S836
  • [22] Effects of grain refining on rheological behavior of semi-solid Al-7%Si alloy
    Luo, Wei
    Yan, Mi
    Zhejiang Daxue Xuebao (Gongxue Ban)/Journal of Zhejiang University (Engineering Science), 2005, 39 (08): : 1247 - 1250
  • [23] Preparation of semi-solid A356 Al-alloy slurry by introducing grain process
    Chen Zheng-zhou
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2012, 22 (06) : 1307 - 1312
  • [24] Recrystallisation in the semi-solid state in 7075 aluminium alloy
    Atkinson, H. V.
    Burke, K.
    Vaneetveld, G.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 490 (1-2): : 266 - 276
  • [25] Recrystallisation in the Semi-Solid State in 7075 Aluminium Alloy
    Atkinson, H. V.
    Burke, K.
    Vaneetveld, G.
    INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2008, 1 (Suppl 1) : 973 - 976
  • [26] RHEOLOGY OF STELLITE™ 21 ALLOY IN SEMI-SOLID STATE
    Solek, K.
    Kapranos, P.
    ARCHIVES OF METALLURGY AND MATERIALS, 2016, 61 (04) : 1901 - 1907
  • [27] Recrystallisation in the Semi-Solid State in 7075 Aluminium Alloy
    H. V. Atkinson
    K. Burke
    G. Vaneetveld
    International Journal of Material Forming, 2008, 1 : 973 - 976
  • [28] Effects of Extrusion Processing on Microstructure of 7075Al Alloy in the Semi-solid State
    宋扬
    张志明
    王开
    LI Hongxu
    ZHU Zizong
    JournalofWuhanUniversityofTechnology(MaterialsScience), 2019, 34 (06) : 1433 - 1443
  • [29] Microstructural evolution and crystal orientation of electromagnetically stirred al alloy in the semi-solid state
    Lee, Dock-Young
    Kang, Suk-Won
    Kim, Ha-young
    Kim, Ki-Bae
    ECO-MATERIALS PROCESSING AND DESIGN VIII, 2007, 544-545 : 399 - +
  • [30] Effects of Extrusion Processing on Microstructure of 7075Al Alloy in the Semi-solid State
    Song Yang
    Zhang Zhiming
    Wang Kai
    Li Hongxu
    Zhu Zizong
    JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2019, 34 (06): : 1433 - 1443
12345