Effect of TiC particle on grain growth of Al alloy in the semi-solid state

被引：0

作者：

Liu, Hui-Min ^{[1
]}

Wang, Li-Da ^{[1
]}

Zhang, Juan ^{[1
]}

Yao, Qing-Hu ^{[1
]}

He, Jing ^{[1
]}

机构：

[1] School of Materials Science and Engineering, Inner Mongolia University of Technology, Huhehaote 010051, China

来源：

Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment | 2006年 / 27卷 / 04期

关键词：

Grain growth - Grain size and shape - Microstructure - Particles (particulate matter) - Scanning electron microscopy - Titanium carbide;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

The microstructure of in-situ reactive liquidus cast 7075 + 2.5 vol% TiC Al alloy in the semi-solid state were observed using SEM. The grain sizes were measured using a mean linear intercept method and the effect of in-situ formed TiC particles on grain growth in the two-phase (liquid + solid) region of liquidus cast 7075 Al alloy were analyzed. The results show that the in-situ formed TiC particles can not only make the liquidus cast 7075 Al alloy with fine and equiaxed grains but also control evidently grain growth during reheating of the alloy. The average grain sizes of 7075 + 2.5 vol% TiC Al alloy decrease 30-40 μm compared to 7075 Al alloy when the alloys are reheated at 600°C for 5, 10, 30 min.

引用

页码：36 / 39

共 50 条

[1] Grain growth of in-situ reactive liquidus cast Al alloy at semi-solid state
Liu, Hui-Min
Ren, Yun
Liu, Jun
Yao, Qing-Hu
Cailiao Gongcheng/Journal of Materials Engineering, 2006, (01): : 3 - 7
[2] Grain growth law of semi-solid state TiCp/7075 Al alloy prepared by spray deposition
Liu, HM
He, JP
Yang, B
Zhang, JS
ACTA METALLURGICA SINICA, 2006, 42 (02) : 158 - 162
[3] A model for grain growth in semi-solid treatment of an Al-4Cu-Mg alloy
Jiang, HT
Li, MQ
PRICM 5: THE FIFTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-5, 2005, 475-479 : 2571 - 2574
[4] Viscosity and structure variations of Al–Si alloy in the semi-solid state
Y. S YANG
C.-Y. A TSAO
Journal of Materials Science, 1997, 32 : 2087 - 2092
[5] Deformation mechanism of compression of 2024 Al alloy in semi-solid state
LUO Shoujing and SUN JiakuanSchool of Materials Science and Engineering
ChineseScienceBulletin, 1999, (17) : 1561 - 1566
[6] Deformation mechanism of compression of 2024 Al alloy in semi-solid state
Luo, SJ
Sun, JK
CHINESE SCIENCE BULLETIN, 1999, 44 (17): : 1561 - 1566
[7] Microstructure Evolution and Grain Coarsening Mechanism of Al-Cu-Mg Alloy Powder in Semi-solid State
Wu M.
Liu J.
Luo X.
Liu Y.
Cai R.
Xu W.
Chen X.
Cailiao Daobao/Materials Reports, 2022, 36 (24):
[8] Effect of yttrium on the microstructure of a semi-solid A356 Al alloy
LIU Zheng and HU Yongmei Faculty of Material and Chemical Engineering
RareMetals, 2008, (05) : 536 - 540
[9] Effect of yttrium on the microstructure of a semi-solid A356 Al alloy
Liu Zheng
Hu Yongmei
RARE METALS, 2008, 27 (05) : 536 - 540
[10] Grain refining of conventional and semi-solid A356 Al-Si alloy
Nafisi, Shahrooz
Ghomashchi, Reza
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2006, 174 (1-3) : 371 - 383

← 1 2 3 4 5 →