Formation of cube recrystallized grains in high-purity Al

被引:0
|
作者
Umezawa, Atsushi [1 ]
Inagaki, Hirosuke [1 ]
机构
[1] Department of Mechanical Engineering, Shonan Institute of Technology, 251-8511 Fujisawashi, 1-1-25, Japan
来源
关键词
Backscattering - Cold rolling - Geometry - Grain boundaries - Grain growth - Textures;
D O I
10.3139/ijmr-2006-0008
中图分类号
学科分类号
摘要
In high-purity 4 N (99.99 wt.%) Al containing 50 wt.ppm Cu, very strong {100} recrystallization textures are developed after 98% cold rolling and annealing at 500 °C. They are about three times stronger than those observed in standard high-purity 4 N Al without Cu addition. In this paper, the mechanism of the formation of such strong {100} recrystallization textures were investigated in detail by using the EBSP (electron backscatter pattern) analysis. It was found that, at the earliest stage of recrystallization, {100} -recrystallized grains were nucleated by forming a row lying parallel to the rolling direction and growing preferentially within the elongated deformed grain in which they were nucleated. Most of these {100}-recrystallized grains had orientations very near to the exact cube orientations. {100}-recrystallized grains in this materials were characterized by their rapid growth, which was observed at the later stages of recrystallization. Since they were surrounded by deformed regions having very strong β-fiber rolling textures formed by heavy cold rolling, their grain boundaries were high-angle grain boundaries with high mobility. Assisted further by high stored energy introduced by heavy rolling reductions, {100}-recrystallized grains could grow very rapidly, traversing readily several deformed grains. In this material, {100}-recrystallized grains were not nucleated so abundantly. However, {100}-recrystallized grains were nucleated much earlier and grew much faster than recrystallized grains with other orientations. They were, therefore, always larger than recrystallized grains with other orientations. Due to such size advantages, {100}-recrystallized grains could rapidly consume fine-recrystallized grains with other orientations during the subsequent grain growth process. As a result, microstructures observed after annealing at 500 °C for 2 h consisted mostly of coarse {100}-recrystallized grains slightly misoriented with each other. It is, thus, rapid growth of few {100}-recrystallized grains during recrystallization, and their preferential grain growth, that enhance the development of very strong {100} recrystallization textures in this high-purity Al. Cu seems to suppress nucleation of recrystallized grains with other orientations. © 2006 Carl Hanser Verlag, München.
引用
收藏
页码:49 / 58
相关论文
共 50 条
  • [21] FORMATION + GROWTH OF VOIDS IN HIGH-PURITY GOLD
    GIRIFALCO, LA
    DURDALLE.CG
    JOM-JOURNAL OF METALS, 1964, 16 (01): : 85 - &
  • [22] EFFECT OF THORIA ON ELEVATED-TEMPERATURE TENSILE PROPERTIES OF RECRYSTALLIZED HIGH-PURITY TUNGSTEN
    KING, GW
    SELL, HG
    TRANSACTIONS OF THE METALLURGICAL SOCIETY OF AIME, 1965, 233 (06): : 1104 - &
  • [23] Effect of Cross Rolling Cycle on the Deformed and Recrystallized Gradient in High-Purity Tantalum Plate
    Zhu Jialin
    Liu Shifeng
    Cao Yu
    Liu Yahui
    Deng Chao
    Liu Qing
    ACTA METALLURGICA SINICA, 2019, 55 (08) : 1019 - 1033
  • [24] DISLOCATION STRUCTURES OBSERVED IN HIGH-PURITY RECRYSTALLIZED ALUMINIUM BY X-RAY DIFFRACTION
    LANG, AR
    MEYRICK, G
    PHILOSOPHICAL MAGAZINE, 1959, 4 (43): : 878 - 880
  • [25] Abnormal grain growth of off-cube grains in high purity aluminum foils with cube texture
    Takata, N
    Yoshida, F
    Ikeda, K
    Nakashima, H
    Abe, H
    MATERIALS TRANSACTIONS, 2005, 46 (12) : 2975 - 2980
  • [26] COLUMNAR GRAINS AND TWINS IN HIGH-PURITY SPUTTER-DEPOSITED COPPER
    DAHLGREN, SD
    JOURNAL OF VACUUM SCIENCE & TECHNOLOGY, 1974, 11 (04): : 832 - 836
  • [27] NATURE OF THE MATRIX FOR SECONDARY RECRYSTALLIZATION TO THE CUBE TEXTURE IN HIGH-PURITY SILICON IRON
    DUNN, CG
    WALTER, JL
    TRANSACTIONS OF THE AMERICAN INSTITUTE OF MINING AND METALLURGICAL ENGINEERS, 1960, 218 (03): : 448 - 453
  • [28] Characterization of boundary roughness of two cube grains in partly recrystallized copper
    Sun, J.
    Zhang, Y. B.
    Dahl, A. B.
    Conradsen, K.
    Jensen, D. Juul
    36TH RISO INTERNATIONAL SYMPOSIUM ON MATERIALS SCIENCE, 2015, 89
  • [29] DEVELOPMENT OF ROLLING AND RECRYSTALLIZATION TEXTURES IN HIGH-PURITY AL
    HELLER, H
    SLAKHORST, J
    VERBRAAK, T
    ZEITSCHRIFT FUR METALLKUNDE, 1977, 68 (01): : 31 - 37
  • [30] FORMATION AND BREAKDOWN OF OXIDE LAYERS ON HIGH-PURITY IRON
    DYE, TG
    FURSEY, A
    LLOYD, GO
    MEMOIRES SCIENTIFIQUES DE LA REVUE DE METALLURGIE, 1968, 65 (JUN): : 383 - &