Particle deposition in the pulmonary region of the human lung: A semi-empirical model of single breath transport and deposition

被引:0
|
作者
Park, S.S. [1 ]
Wexler, A.S. [1 ,2 ,3 ]
机构
[1] Department of Civil and Environmental Engineering, University of California, Davis, CA 95616, United States
[2] Department of Mechanical and Aeronautical Engineering, University of California, Davis, CA 95616, United States
[3] Department of Land, Air, and Water Resources, University of California, Davis, CA 95616, United States
来源
Journal of Aerosol Science | 2007年 / 38卷 / 02期
关键词
Particle deposition has been observed in the distal pulmonary regions of human airways; where their clearance is lower and thus their potential health effects greater. Whereas gases are transported convectively to proximal pulmonary regions and then diffuse to the distal ones; particles have a very low diffusivity so only few can be transported to the two or three most distal generations by convection in a single tidal breath. Yet models of particle deposition in human airways invariably employ a single breath to characterize regional pulmonary deposition. To study particle transport and deposition during multiple breathing cycles; it is essential to develop a single breath model that describes aerosol bolus dispersion and deposition for the entire lung. Here we present a simple semi-empirical model for whole lung aerosol bolus dispersion; and use bolus dispersion data from the literature to identify model parameters. The model assumes that the particle transport on inhalation and exhalation differs due to secondary flow asymmetries at the bifurcations. By adjusting model parameters to measurements; the effective particle transport profiles averaged over the entire lung and mixing intensity at different lung depths are obtained. The average inspiratory particle transport profile is found to be slightly sharper than parabolic; whereas on exhalation it is relatively blunt. The mixing intensity due to secondary flows is large in the conducting airways (∼ 95 ml of lung depth) but drops sharply due to the rapid decrease in Dean number in the deeper lung depths. Therefore; significant mixing due to secondary flows occurs mainly in the proximal airways during exhalation. A set of parameters is identified such that modeled bolus standard deviation; mode shift; and skewness agree with the measurements. Particle loss due to deposition was calculated in each generation and the resulting predictions of particle deposition fractions were in a good agreement with measurements. Although this model does not simulate detailed flow mechanics in the lungs; it does represent overall particle transport phenomena that lead to bolus dispersion observations and it provides a framework for the simulation of pulmonary particle transport during multiple breaths; as presented in an accompanying study of this work. © 2006 Elsevier Ltd. All rights reserved;
D O I
暂无
中图分类号
学科分类号
摘要
Journal article (JA)
引用
收藏
页码:228 / 245
相关论文
共 50 条
  • [31] AEROSOL INHALATION APPARATUS FOR HUMAN SINGLE BREATH DEPOSITION STUDIES
    PALMES, ED
    WANG, CS
    AMERICAN INDUSTRIAL HYGIENE ASSOCIATION JOURNAL, 1971, 32 (01): : 43 - &
  • [32] Experimental-computational study of fibrous particle transport and deposition in a bifurcating lung model
    Chen, Xiaole
    Zhong, Wenqi
    Tom, Josin
    Kleinstreuer, Clement
    Feng, Yu
    He, Xiaopu
    PARTICUOLOGY, 2016, 28 : 102 - 113
  • [33] Ultrafine particle transport and deposition in a large scale 17-generation lung model
    Islam, Mohammad S.
    Saha, Suvash C.
    Sauret, Emilie
    Gemci, Tevfik
    Yang, Ian A.
    Gu, Y. T.
    JOURNAL OF BIOMECHANICS, 2017, 64 : 16 - 25
  • [34] Modeling Airflow and Particle Deposition in a Human Acinar Region
    Kolanjiyil, Arun V.
    Kleinstreuer, Clement
    COMPUTATIONAL AND MATHEMATICAL METHODS IN MEDICINE, 2019, 2019
  • [35] Micro particle transport and deposition in human upper airways
    Chen, Jim S.
    Kim, Jinho
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION 2007, VOL 2: BIOMEDICAL AND BIOTECHNOLOGY ENGINEERING, 2008, : 271 - 280
  • [36] Lung morphometry and particle transport and deposition: Overview of existing models
    Hoffmann, W
    AEROSOL INHALATION: RECENT RESEARCH FRONTIERS, 1996, : 91 - 102
  • [37] Simulation of airflow fields and microparticle deposition in realistic human lung airway models. Part II: Particle transport and deposition
    Li, Zheng
    Kleinstreuer, Clement
    Zhang, Zhe
    EUROPEAN JOURNAL OF MECHANICS B-FLUIDS, 2007, 26 (05) : 650 - 668
  • [38] Analysis of lobar differences in particle deposition in the human lung
    Subramaniam, RP
    Asgharian, B
    Freijer, JI
    Miller, FJ
    Anjilvel, S
    INHALATION TOXICOLOGY, 2003, 15 (01) : 1 - 21
  • [39] Human lung morphology models for particle deposition studies
    Martonen, TB
    Schroeter, JD
    Hwang, DM
    Fleming, JS
    Conway, JH
    INHALATION TOXICOLOGY, 2000, 12 : 109 - 121
  • [40] Computer simulations of particle deposition in the developing human lung
    Musante, CJ
    Martonen, TB
    JOURNAL OF THE AIR & WASTE MANAGEMENT ASSOCIATION, 2000, 50 (08): : 1426 - 1432