Development of high strength & lightweight cementitious composites using hollow glass microsphere in a low water-to-cement matrix

被引:1
|
作者
Lee, Nankyoung [1 ]
Pae, Junil [1 ]
Kang, Sung-Hoon [1 ]
Kim, Hyeong-ki [2 ]
Moon, Juhyuk [1 ,3 ]
机构
[1] Department of Civil and Environmental Engineering, Seoul National University, 1 Gwanak-ro, Seoul, Gwanak-gu,08826, Korea, Republic of
[2] School of Architecture, Chosun University, 309 Pilmun-daero, Dong-gu, Gwangju,61452, Korea, Republic of
[3] Institute of Construction and Environmental Engineering, Seoul National University, 1 Gwanak-ro, Seoul, Gwanak-gu,08826, Korea, Republic of
关键词
Cement matrix - Cementitious composites - High strength concretes - High-strength - Hollow glass microspheres - Hollow particle - Lightweight concrete - Low water - Property - Structural concretes;
D O I
暂无
中图分类号
学科分类号
摘要
It has been a challenge for structural concrete to satisfy both high strength and lightweight, since general lightweight properties have been achieved through the use of lightweight aggregates with inherently weak strength. In this study, a cement composite with high strength and lightweight was developed using very low-specific gravity material of hollow particles. A combination of a polycarboxylate-ether superplasticizer, filler materials, and a low water-to-cement ratio was selected to increase the viscosity of the cement matrix for minimizing floating of the hollow particles. As a result, the developed cementitious composites substantially outperformed the material performance of previously reported lightweight concretes. Compressive strength of 69 MPa and 97 MPa at 28 days were achieved with the density less than 1.5 g/cm3 from ambient and heat-treated curing, respectively. From a reaction perspective, the used hollow particles did not actively participate in the cement-based hydration reaction, which indicated that their role is limited to being very light inert fillers in the designed cementitious matrix. © 2022 Elsevier Ltd
引用
收藏
相关论文
共 46 条
  • [41] Development of High Strength, High Water Resistant, Low-Formaldehyde Emission Urea-Formaldehyde Adhesive and Its Effect on the Properties of Wood Composites
    Tian, Wei
    Feng, Hongyu
    Wang, Xiaoyi
    Wu, Weijie
    Zeng, Shiyi
    Zhu, Yaqin
    Wang, Jiangbo
    Ye, Yuhang
    Mei, Changtong
    Liu, Yuanqiang
    Lu, Lihua
    Jiang, Shaohua
    Han, Xiaoshuai
    JOURNAL OF APPLIED POLYMER SCIENCE, 2025, 142 (10)
  • [42] Development and characterization of a controlled low-strength material produced using a ternary mixture of Portland cement, fly ash, and waste water treatment sludge
    Ho, Lanh Si
    Jhang, Bo-Jyun
    Hwang, Chao-Lung
    Huynh, Trong-Phuoc
    JOURNAL OF CLEANER PRODUCTION, 2022, 356
  • [43] Design and development of plentiful fly ash-based glass powder-reinforced plastic composite bricks for low water absorption and high compressive and flexural strength
    Singh, Aditya
    Srivastava, Ashish Kumar
    Kumar, Ajay
    Bajaj, Rajesh
    Singh, Gyanendra Kumar
    INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM, 2025, 19 (02): : 939 - 948
  • [44] Development of reactive carbonate-calcined clay-cement (C4) composites through synchronizing aluminate-carbonate reaction: Toward high compressive strength and low carbon emission
    Zhao, Yingliang
    Zheng, Yong
    He, Jionghuang
    Cui, Kai
    Shen, Peiliang
    Poon, Chi Sun
    Peng, Guangmin
    Guo, Ruilai
    Xia, Daohui
    CEMENT & CONCRETE COMPOSITES, 2025, 160
  • [45] Preparation of low-cost, high-strength and fast-dissolving (MgO -Al 3 Fe)/ AZ91 magnesium matrix composites using a novel in-situ reaction
    Zhang, Zhen
    Nie, Kaibo
    Deng, Kunkun
    Xu, Chao
    COMPOSITES COMMUNICATIONS, 2024, 49
  • [46] Using mixture design experiments combined with a multi-objective optimization method to prepare high-strength, low-friction m-polyphthalazine ether sulfone ketone water-lubricated composites
    Shi, Xiaonan
    Bao, Qingguang
    Cheng, Shan
    Wang, Bing
    Feng, Jingyao
    Sun, Qingfeng
    Wang, Ning
    Li, Nan
    Jian, Xigao
    POLYMER COMPOSITES, 2025,