Enhanced finite element analysis of shear connector pull-out based on cohesive zone model

被引：0
|
作者：
Lin, Jianping [1 ]
Wang, Jinfeng [1 ]
Xu, Rongqiao [1 ]
Ling, Daosheng [1 ]
机构：
[1] Dept. of Civil Engineering, Zhejiang University, Hangzhou,310058, China
来源：
Harbin Gongye Daxue Xuebao/Journal of Harbin Institute of Technology | 2014年 / 46卷 / 12期
关键词：
Finite element method;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
引用
收藏
页码：78 / 83
相关论文
共 50 条
  • [41] Influence of novel design alteration of pedicle screw on pull-out strength: A finite element study
    Takenaka, Shota
    Kaito, Takashi
    Ishii, Ken
    Watanabe, Kota
    Watanabe, Kei
    Shinohara, Akira
    Harada, Tomohisa
    Nakada, Fumiya
    Majima, Yusuke
    Matsumoto, Morio
    JOURNAL OF ORTHOPAEDIC SCIENCE, 2020, 25 (01) : 66 - 72
  • [42] A Bridge between Finite Element and Shear Lag Analyses for Fiber Pull Out
    Avery, G.
    Riddell, W. T.
    PROCEEDINGS OF THE AMERICAN SOCIETY FOR COMPOSITES: THIRTIETH TECHNICAL CONFERENCE, 2015, : 1438 - 1450
  • [43] Effect of pedicle screw misplacement on the pull-out strength using personalized finite element modeling
    Rouyin, A.
    Nazemi, H.
    Arjmand, N.
    Einafshar, M.J.
    Computers in Biology and Medicine, 2024, 183
  • [44] Finite element calculation of energy release rate for single-fibre pull-out test
    Beckert, W
    Lauke, B
    COMPUTATIONAL MATERIALS SCIENCE, 1996, 5 (1-3) : 1 - 11
  • [45] Three-dimensional finite element modeling for bending and pull-out tests of composite slabs
    Plans, Albert
    Grau, David
    Soltanalipour, Milad
    Ferrer-Ballester, Miquel
    Marimon, Frederic
    Andreu, Antoni
    ENGINEERING STRUCTURES, 2023, 295
  • [46] Finite element model analysis of thermal failure in connector
    Xin Wang
    Liang-jun Xu
    Journal of Zhejiang University-SCIENCE A, 2007, 8 : 397 - 402
  • [47] Finite element model analysis of thermal failure in connector
    Wang Xin
    Xu Liang-jun
    JOURNAL OF ZHEJIANG UNIVERSITY-SCIENCE A, 2007, 8 (03): : 397 - 402
  • [48] Effective prediction finite element model of pull-out capacity for cast-in-place anchor in high strain rate effects
    Bao, Quoc To
    Lee, Kihak
    An, Hyoseo
    Lee, Do Hyung
    Shin, Jiuk
    SCIENTIFIC REPORTS, 2023, 13 (01)
  • [49] Effective prediction finite element model of pull-out capacity for cast-in-place anchor in high strain rate effects
    Quoc To Bao
    Kihak Lee
    Hyoseo An
    Do Hyung Lee
    Jiuk Shin
    Scientific Reports, 13
  • [50] Discrete cohesive zone model for mixed-mode fracture using finite element analysis
    Xie, De
    Waas, Anthony M.
    ENGINEERING FRACTURE MECHANICS, 2006, 73 (13) : 1783 - 1796
12345