High order finite element model for core loss assessment in a hysteresis magnetic lamination

被引：0
|
作者：
Zhang, Yu [1 ]
Cheng, Ming-C. [1 ]
Pillay, Pragasen [1 ]
Helenbrook, Brian [2 ]
机构：
[1] Department of Electrical and Computer Engineering, Clarkson University, Potsdam, NY 13699, United States
[2] Department of Mechanical and Aeronautical Engineering, Clarkson University, Potsdam, NY 13699, United States
来源：
Journal of Applied Physics | 2009年 / 106卷 / 04期
关键词：
A dynamic model for evaluating core losses in a hysteretic magnetic lamination is developed and then solved using a high-order finite element method that includes time-history effects. It is demonstrated that the dynamic hysteresis effect; previously used to explain the frequency dependence of B-H loops; is not a fundamental phenomenon of magnetic materials but originates from the skin effect. It arises because the measured flux density is an averaged value over the lamination thickness; and this value is influenced strongly by the skin effect. The study verifies that; unlike the observed dynamic hysteresis effect; the local B-H loop is in fact frequency independent. The developed dynamic core loss model is thus derived based on the frequency-independent B-H loop. It is shown that the developed model can accurately evaluate the losses for different frequencies and thicknesses based on only one set of inputs of an experimental B-H loop at one low frequency without a huge database of experimental losses. © 2009 American Institute of Physics;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
下载
收藏
相关论文
共 50 条
  • [31] Finite element analysis for the lamination process of a precision motor core using progressive stacking dies
    Park, K
    Choi, SR
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2002, 130 : 477 - 481
  • [32] RESULTS ON MODELING MAGNETIC HYSTERESIS USING THE FINITE-ELEMENT METHOD
    OSSART, F
    MEUNIER, G
    JOURNAL OF APPLIED PHYSICS, 1991, 69 (08) : 4835 - 4837
  • [33] Magnetic transmission gear finite element simulation with iron pole hysteresis
    Filippini, Mattia
    Alotto, Piergiorgio
    Glehn, Gregor
    Hameyer, Kay
    OPEN PHYSICS, 2018, 16 (01): : 105 - 110
  • [34] Influence of Magnetic History and Accommodation on Hysteresis Loss for Arbitrary Core Excitations
    Stenglein, Erika
    Kuebrich, Daniel
    Albach, Manfred
    Duerbaum, Thomas
    2019 21ST EUROPEAN CONFERENCE ON POWER ELECTRONICS AND APPLICATIONS (EPE '19 ECCE EUROPE), 2019,
  • [35] A high-order finite element for dynamic analysis of soft-core sandwich plates
    Elmalich, Dvir
    Rabinovitch, Oded
    JOURNAL OF SANDWICH STRUCTURES & MATERIALS, 2012, 14 (05) : 525 - 555
  • [36] Vibration analysis of beams using high-order finite element model
    Wen, Ying
    Zeng, Oing-Yuan
    STRUCTURAL CONDITION ASSESSMENT, MONITORING AND IMPROVEMENT, VOLS 1 AND 2, 2007, : 224 - 228
  • [37] A General and Accurate Iron Loss Calculation Method Considering Harmonics Based on Loss Surface Hysteresis Model and Finite-Element Method
    Zhu, Qinyue
    Wu, Quanpeng
    Li, Wei
    Minh-Trien Pham
    Zhu, Lixun
    IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2021, 57 (01) : 374 - 381
  • [38] High-order finite-element methods,for the computation of bending loss in optical waveguides
    Jedidi, Rym
    Pierre, Roger
    JOURNAL OF LIGHTWAVE TECHNOLOGY, 2007, 25 (09) : 2618 - 2630
  • [39] Lamination effects on a 3D model of the magnetic core of power transformers
    Poveda-Lerma, Antonio
    Serrano-Callergues, Guillermo
    Riera-Guasp, Martin
    Pineda-Sanchez, Manuel
    Puche-Panadero, Ruben
    Perez-Cruz, Juan
    OPEN PHYSICS, 2017, 15 (01): : 997 - 1003
  • [40] Magnetic core model for circuit simulations including losses and hysteresis
    Gruosso, Giambattista
    Brambilla, Angelo
    INTERNATIONAL JOURNAL OF NUMERICAL MODELLING-ELECTRONIC NETWORKS DEVICES AND FIELDS, 2008, 21 (05) : 309 - 334
12345