Effects of high-temperature exposure on mechanical properties of thermal sprayed CoNiCrAlY alloy coating

被引：0
|
作者：
Yamano H. [1 ]
Takabatake T. [1 ]
Tani K. [1 ]
机构：
[1] Thermal Spraying Technology RandD Laboratories, Tocalo Co., Ltd., Akashi-shi, Hyogo, 674-0093, 14-3 Minamifutami, Futami-cho
来源：
Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A | 2010年 / 76卷 / 767期
关键词：
Bending; Coating material; CoNiCrAlY alloy; Hardness; High temperature exposure; Residual stress; Strain tolerance; Stress-Strain measurement; Thermal spray coating; Young's modulus;
D O I：
10.1299/kikaia.76.794
中图分类号：
学科分类号：
摘要：
Thermal spraying is widely used in various industrial fields as effective surface modification method. In this study, mechanical properties of thermal sprayed CoNiCrAlY alloy coating were investigated. The coatings were prepared by three kinds of thermal spray methods. High-temperature exposure of the coated specimens was carried out in the atmosphere. After high-temperature exposure, apparent Young's modulus, strain tolerance, residual stress and hardness of the CoNiCrAlY coating were measured. These tests were also carried out using specimens without hightemperature exposure. As a result, the changes of mechanical properties caused by high-temperature exposure seemed to be correlated with properties of boundary between sprayed particles. From the results, effects of high-temperature exposure on mechanical properties of thermal sprayed CoNiCrAlY alloy coating were discussed.
引用
收藏
页码：794 / 801
页数：7
相关论文
共 50 条
  • [21] Ambient and high-temperature thermal conductivity of thermal sprayed coatings
    W. Chi
    S. Sampath
    H. Wang
    Journal of Thermal Spray Technology, 2006, 15 : 773 - 778
  • [22] Ambient and high-temperature thermal conductivity of thermal sprayed coatings
    Chi, W.
    Sampath, S.
    Wang, H.
    JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2006, 15 (04) : 773 - 778
  • [23] Mechanical and Thermal Properties of UHPC Exposed to High-Temperature Thermal Cycling
    Yang, In-Hwan
    Park, Jihun
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2019, 2019
  • [24] Change in microstructure of plasma sprayed thermal barrier coating by high temperature isothermal heat exposure
    Shinmi, A
    Hasegawa, M
    Kagawa, Y
    Kawamura, M
    Suemitsu, T
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 2005, 69 (01) : 67 - 72
  • [25] Microstructures, properties and high-temperature carburization resistances of HVOF thermal sprayed NiAl intermetallic-based alloy coatings
    Wang, Y
    Chen, W
    SURFACE & COATINGS TECHNOLOGY, 2004, 183 (01): : 18 - 28
  • [26] EFFECTS OF EXPOSURE TO HIGH-TEMPERATURE HELIUM CONTAINING OXYGEN ON THE MECHANICAL-PROPERTIES OF MOLYBDENUM AND TZM-MO ALLOY AT ROOM-TEMPERATURE
    NODA, T
    OKADA, M
    WATANABE, R
    JOURNAL OF NUCLEAR MATERIALS, 1980, 91 (01) : 103 - 116
  • [27] Fabrication and Characterization of HVOF Sprayed CoNiCrAlY-6%Al2O3 Coating to Improve High-Temperature Oxidation Resistance
    Hosseini, Yasamin
    Kermanpur, Ahmad
    Ashrafizadeh, Fakhreddin
    JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2024, 33 (06) : 2104 - 2116
  • [28] THE MECHANICAL PROPERTIES OF HVOF SPRAYED Cr3C2-25%CoNiCrAlY COATING DETERMINED BY INDENTATION
    Houdkova, Sarka
    Blahova, Olga
    Kasparova, Michaela
    CHEMICKE LISTY, 2012, 106 : S428 - S431
  • [29] The effect of pre-oxidation on microstructure, mechanical properties and high-temperature tribological behaviors of HVOF-sprayed NiCoCrAlYTa coating
    Hao, Enkang
    Zhao, Xiaoqin
    An, Yulong
    Deng, Wen
    Zhou, Huidi
    Chen, Jianmin
    APPLIED SURFACE SCIENCE, 2019, 489 : 187 - 197
  • [30] Effects of High-Temperature Carburising in the Plasma on the mechanical Properties
    Clausen, B.
    Hoffmann, F.
    Zoch, H. -W.
    Mayr, P.
    HTM-JOURNAL OF HEAT TREATMENT AND MATERIALS, 2005, 60 (02): : 57 - 63
12345