Effects of high-temperature exposure on mechanical properties of thermal sprayed CoNiCrAlY alloy coating

被引:0
|
作者
Yamano H. [1 ]
Takabatake T. [1 ]
Tani K. [1 ]
机构
[1] Thermal Spraying Technology RandD Laboratories, Tocalo Co., Ltd., Akashi-shi, Hyogo, 674-0093, 14-3 Minamifutami, Futami-cho
关键词
Bending; Coating material; CoNiCrAlY alloy; Hardness; High temperature exposure; Residual stress; Strain tolerance; Stress-Strain measurement; Thermal spray coating; Young's modulus;
D O I
10.1299/kikaia.76.794
中图分类号
学科分类号
摘要
Thermal spraying is widely used in various industrial fields as effective surface modification method. In this study, mechanical properties of thermal sprayed CoNiCrAlY alloy coating were investigated. The coatings were prepared by three kinds of thermal spray methods. High-temperature exposure of the coated specimens was carried out in the atmosphere. After high-temperature exposure, apparent Young's modulus, strain tolerance, residual stress and hardness of the CoNiCrAlY coating were measured. These tests were also carried out using specimens without hightemperature exposure. As a result, the changes of mechanical properties caused by high-temperature exposure seemed to be correlated with properties of boundary between sprayed particles. From the results, effects of high-temperature exposure on mechanical properties of thermal sprayed CoNiCrAlY alloy coating were discussed.
引用
收藏
页码:794 / 801
页数:7
相关论文
共 50 条
  • [1] Compressive mechanical properties of thermal sprayed AlCoCrFeNi high entropy alloy coating
    Basak, Animesh Kumar
    Kurdi, Abdulaziz
    Radhika, Nachimuthu
    Arputharaj, John
    Prakash, Chander
    Pramanik, Alokesh
    Shankar, Subramanian
    JOURNAL OF ALLOYS AND COMPOUNDS, 2024, 1003
  • [2] Effect of Thermal Treatment on High-Temperature Mechanical Properties Enhancement in LPPS, HVOF, and APS CoNiCrAlY Coatings
    Waki, Hiroyuki
    Kitamura, Takeshi
    Kobayashi, Akira
    JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2009, 18 (04) : 500 - 509
  • [3] Effect of Thermal Treatment on High-Temperature Mechanical Properties Enhancement in LPPS, HVOF, and APS CoNiCrAlY Coatings
    Hiroyuki Waki
    Takeshi Kitamura
    Akira Kobayashi
    Journal of Thermal Spray Technology, 2009, 18 : 500 - 509
  • [4] Effects of High-Temperature Exposure on the Mechanical Properties of Kenaf Composites
    Radzuan, Nabilah Afiqah Mohd
    Tholibon, Dulina
    Sulong, Abu Bakar
    Muhamad, Norhamidi
    Haron, Che Hassan Che
    POLYMERS, 2020, 12 (08)
  • [5] High-temperature creep of a CoNiCrAlY bond coat alloy
    Dobes, Ferdinand
    Dymacek, Petr
    Hasegawa, Makoto
    Iwashita, Maiko
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 759 : 272 - 277
  • [6] Influence of the mechanical properties of CoNiCrAlY under-coating on the high temperature fatigue life of YSZ thermal-barrier-coating system
    Waki, Hiroyuki
    Kobayashi, Akira
    VACUUM, 2008, 83 (01) : 171 - 174
  • [7] Effect of Thermal Exposure on Mechanical Properties of a Plasma-Sprayed Nanostructured Thermal Barrier Coating
    Zilong Wu
    Liyong Ni
    Qinghe Yu
    Chungen Zhou
    Journal of Thermal Spray Technology, 2012, 21 : 169 - 175
  • [8] Effect of Thermal Exposure on Mechanical Properties of a Plasma-Sprayed Nanostructured Thermal Barrier Coating
    Wu, Zilong
    Ni, Liyong
    Yu, Qinghe
    Zhou, Chungen
    JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2012, 21 (01) : 169 - 175
  • [9] The mechanical properties and high-temperature wear behavior of AlCrN coating on the TA15 alloy
    Yi, Jinwei
    Miao, Qiang
    Liang, Wenping
    Ding, Zheng
    Wang, Xu
    Lin, Hao
    Qi, Yan
    An, Hao
    MATERIALS RESEARCH EXPRESS, 2019, 6 (11)
  • [10] Influence of coating process on high-temperature oxidation property for plasma sprayed thermal barrier coating systems
    Takahashi, S
    Yoshiba, M
    Harada, Y
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 2004, 68 (07) : 438 - 446