Micro-morphology of intermetallic compounds in rapid solidification Sn2.5Ag0.7Cu solder alloy and its effects on performance of solder joint

被引：0
|
作者：
Zhao, Guo-Ji [1 ,2 ]
Zhang, Ke-Ke [3 ]
Luo, Jian [2 ]
机构：
[1] School of Materials Science and Engineering, Chongqing University, Chongqing 400044, China
[2] The State Key Laboratory of Mechanical Transmission, Chongqing University, Chongqing 400044, China
[3] School of Materials Science and Engineering, Henan University of Science and Technology, Luoyang 471003, China
来源：
Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals | 2010年 / 20卷 / 10期
关键词：
Dispersive distribution - Eutectic structures - Influence mechanism - Scanning electronic microscopes - Second phase particles - Sn2.5Ag0.7Cu - Solidification process - Supersaturated solid solutions;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Rapid solidification Sn2.5Ag0.7Cu solder alloy ribbons were produced by single copper roller process with SP009A semi-automatic nonmetal series fabricate machine, and the micro-morphology and properties of intermetallic compound (IMC) were studied by JSM-5610LV scanning electronic microscope and energy spectrum analyzer. Through the analysis on the microstructure and shear fracture of the soldering joint, the influence mechanism of IMC on the toughness of soldering joint was studied. The results show that, in solder joint by using rapid solidification solder alloy, small size β-Sn tight arrangement at the interface can effectively inhibit the growth of IMC Cu6Sn5, and the IMC Cu6Sn5 and Ag3Sn in the supersaturated solid solution with small size and dispersive distribution massively precipitate as the second phase particle confounding with the primary phase during the solidification process to form fine eutectic structure in the soldering beam, and the toughness of soldering joint is improved.
引用
收藏
页码：2025 / 2031
相关论文
共 50 条
  • [21] Influences of intermetallic compounds morphologies on fracture behaviors of Sn-3Ag-0.5Cu/Cu solder joint
    Yang, L. M.
    Zhang, Z. F.
    2013 14TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT), 2013, : 247 - 249
  • [22] The morphology and kinetic evolution of intermetallic compounds at Sn–Ag–Cu solder/Cu and Sn–Ag–Cu-0.5Al2O3 composite solder/Cu interface during soldering reaction
    S. Y. Chang
    L. C. Tsao
    M. W. Wu
    C. W. Chen
    Journal of Materials Science: Materials in Electronics, 2012, 23 : 100 - 107
  • [23] Intermetallic size and morphology effects on creep rate of Sn-3Ag-0.5Cu solder
    Xu, Yilun
    Gu, Tianhong
    Xian, Jingwei
    Giuliani, Finn
    Britton, T. Ben
    Gourlay, Christopher M.
    Dunne, Fionn P. E.
    INTERNATIONAL JOURNAL OF PLASTICITY, 2021, 137
  • [24] Effect of Ni addition on the wettability and microstructure of Sn2.5Ag0.7Cu0.1RE solder alloy
    Wang, Yaoli
    Wang, Guangxin
    Song, Kexing
    Zhang, Keke
    MATERIALS & DESIGN, 2017, 119 : 219 - 224
  • [25] Effects of intermetallic compounds on the properties of Sn-Ag-Cu lead-free solder joints
    College of Materials Science and Engineering, Jilin University, Changchun 130022, China
    Jilin Daxue Xuebao (Gongxueban), 2006, 6 (846-850):
  • [26] The morphology and kinetic evolution of intermetallic compounds at Sn-Ag-Cu solder/Cu and Sn-Ag-Cu-0.5Al2O3 composite solder/Cu interface during soldering reaction
    Chang, S. Y.
    Tsao, L. C.
    Wu, M. W.
    Chen, C. W.
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2012, 23 (01) : 100 - 107
  • [27] A diffusion model and growth kinetics of interfacial intermetallic compounds in Sn-0.3Ag-0.7Cu and Sn-0.3Ag-0.7Cu-0.5CeO2 solder joints
    Li, Z.H.
    Tang, Y.
    Guo, Q.W.
    Li, G.Y.
    Journal of Alloys and Compounds, 2022, 818
  • [28] A diffusion model and growth kinetics of interfacial intermetallic compounds in Sn-0.3Ag-0.7Cu and Sn-0.3Ag-0.7Cu-0.5CeO2 solder joints
    Li, Z. H.
    Tang, Y.
    Guo, Q. W.
    Li, G. Y.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2020, 818
  • [29] Intermetallic compounds formed during the reflow and aging of Sn-3.8Ag-0.7Cu and Sn-20In-2Ag-0.5Cu solder ball grid of Sn-3.8Ag-0.7Cu and Sn-20In-2Ag-0.5Cu solder ball grid array packages
    M. D. Cheng
    S. Y. Chang
    S. F. Yen
    T. H. Chuang
    Journal of Electronic Materials, 2004, 33 : L18 - L18
  • [30] Effects of Cooling Rates on Microstructure, Wettability and Strength of Sn3.8Ag0.7Cu Solder Alloy
    Murad, Nadhrah
    Aisha, Siti Rabiatull
    Muhammad, Mahadzir Ishak
    ADVANCES IN MATERIAL & PROCESSING TECHNOLOGIES CONFERENCE, 2017, 184 : 266 - 273
12345