Effect of tool flank wear on the orthogonal cutting process

被引：0
|
作者：
Zhao, X.L. [1 ,2 ]
Tang, Y. [1 ]
Deng, W.J. [1 ]
Zhang, F.Y. [1 ]
机构：
[1] College of Mechanical Engineering, South China University of Technology, Guangzhou 510641, China
[2] Department of Mechanical and Energy Engineering, Shaoyang University, Shaoyang 422004, China
来源：
Key Engineering Materials | 2007年 / 329卷
关键词：
7;
D O I：
10.4028/0-87849-416-2.705
中图分类号：
学科分类号：
摘要：
引用
下载
收藏
页码：705 / 710
相关论文
共 50 条
  • [41] The effect of tool flank wear on the heat transfer, thermal damage and cutting mechanics in finish hard tuning
    Wang, JY
    Liu, CR
    CIRP ANNALS 1999 - MANUFACTURING TECHNOLOGY, 1999, : 53 - 58
  • [42] EFFECT OF ABRASION RESISTANCE AND THERMAL PROPERTIES OF CEMENTED CARBIDE CUTTING TOOL GRADE ON FLANK WEAR CHARACTERISTICS
    BER, A
    JOURNAL OF ENGINEERING FOR INDUSTRY-TRANSACTIONS OF THE ASME, 1973, 95 (03): : 794 - 796
  • [43] The monitoring of flank wear on the CBN tool in the hard turning process
    J. M. Zhou
    M. Andersson
    J. E. Stahl
    The International Journal of Advanced Manufacturing Technology, 2003, 22 : 697 - 702
  • [44] The monitoring of flank wear on the CBN tool in the hard turning process
    Zhou, JM
    Andersson, M
    Stahl, JE
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2003, 22 (9-10): : 697 - 702
  • [45] Estimation of tool wear of carbide tool in orthogonal cutting using FEM simulation
    Yen, YC
    Söhner, J
    Weule, H
    Schmidt, J
    Altan, T
    MACHINING SCIENCE AND TECHNOLOGY, 2002, 6 (03) : 467 - 486
  • [46] Identification of Wear Characteristics in Tool Wear Model of Cutting Process
    Matsumura, T.
    Shirakashi, T.
    Usui, E.
    INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2008, 1 (Suppl 1) : 555 - 558
  • [47] A compensation algorithm of tool path for grinding wheel wear in solid cutting tool flank grinding
    Ma, Yuhao
    Li, Yong
    Jiang, Lei
    Ding, Guofu
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2022, 236 (03) : 245 - 254
  • [48] Research on Wear Property of Tool Flank by dry cutting of Austempering Ductile Iron
    Wan, D. D.
    Guo, X. H.
    Wang, C. H.
    HIGH SPEED MACHINING, 2011, 188 : 38 - 42
  • [49] Identification of Wear Characteristics in Tool Wear Model of Cutting Process
    T. Matsumura
    T. Shirakashi
    E. Usui
    International Journal of Material Forming, 2008, 1 : 555 - 558
  • [50] INFLUENCE OF FLANK WEAR, CUTTING SPEED AND CUTTING FLUID ON SURFACE AND SUBSURFACE WORKHARDENING PRODUCED IN AN ORTHOGONAL PLANING OPERATION
    LAU, WS
    RUBENSTE.C
    INTERNATIONAL JOURNAL OF MACHINE TOOL DESIGN AND RESEARCH, 1972, 12 (04): : 311 - &
12345