Thermal and mechanical properties of Cu-Zr-Al bulk metallic glasses

被引:0
|
作者
Cheung, T.L. [1 ]
Shek, C.H. [1 ]
机构
[1] Department of Physics and Materials Science, City University of Hong Kong, Tat Chee Avenue, Kowloon Tong, Hong Kong, Hong Kong
来源
Journal of Alloys and Compounds | 2007年 / 434-435卷 / SPEC. ISS.期
关键词
The effects of adding small amount of aluminum to the binary Cu50Zr50 bulk metallic glass (BMG) on the thermal and mechanical properties were investigated. The Al addition was limited to 3 &le x &le 10 at.% in order to form fully amorphous bulk samples. Glassy rods of 3 mm diameter of these alloys were prepared by copper mold suction casting. The (Cu50Zr50)100-xAlx BMGs (x = 0 and 3 &le x &le 10 at.%) were characterized with differential scanning calorimetry (DSC); X-ray diffraction (XRD); Vickers microhardness test and nanoindentation; respectively. The glass transition temperatures; crystallization temperatures and super-cooled liquid regions of the specimens increased with increasing Al content. The microhardness of the specimens also increases with increasing Al content. Room temperature nanoindentation was carried out on the cross-section of the rods. The results showed that the nanohardness and creep displacement were dependent on the Al content. © 2006 Elsevier B.V. All rights reserved;
D O I
暂无
中图分类号
学科分类号
摘要
Journal article (JA)
引用
下载
收藏
页码:71 / 74
相关论文
共 50 条
  • [21] Mechanical and tribological properties of Zr-Al-Ni-Cu bulk metallic glasses
    Tariq, N. H.
    Hasan, B. A.
    Akhter, J. I.
    Ali, F.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 469 (1-2) : 179 - 185
  • [22] Formation and mechanical properties of Cu-Zr-Al-Sn bulk metallic glasses
    Men, Hua
    Wang, Xiang Ke
    Fu, Jun Ying
    Ma, Chao Li
    Zhang, Tao
    Mater. Trans., 1 (194-197):
  • [23] Formation and mechanical properties of Cu-Zr-Al-Sn bulk metallic glasses
    Hua, M
    Xiang, KW
    Jun, YF
    Chao, LM
    Tao, Z
    MATERIALS TRANSACTIONS, 2006, 47 (01) : 194 - 197
  • [24] Effect of Ge addition on mechanical properties and fracture behavior of Cu-Zr-Al bulk metallic glass
    Malekan, M.
    Shabestari, S. G.
    Gholamipour, R.
    Seyedein, S. H.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 484 (1-2) : 708 - 711
  • [25] Fabrication and mechanical properties of a tungsten wire reinforced Cu-Zr-Al bulk metallic glass composite
    Khademian, N.
    Gholamipour, R.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (13-14): : 3079 - 3084
  • [26] Formation, thermal stability and mechanical properties of Zr-Nb-Cu-Ni-Al bulk metallic glasses
    Dong, Wenbo
    Zhang, Haifeng
    Sun, Wensheng
    Ding, Bingzhe
    Hu, Zhuangqi
    MATERIALS TRANSACTIONS, 2006, 47 (05) : 1294 - 1298
  • [27] Oxidation behaviour of a Cu-Zr-Al bulk metallic glass
    Tam, C. Y.
    Shek, C. H.
    Wang, W. H.
    REVIEWS ON ADVANCED MATERIALS SCIENCE, 2008, 18 (02) : 107 - 111
  • [28] Cu-Zr-Al (Ti) bulk metallic glasses: Cluster selection rules and glass formation
    Wang, Q.
    Qiang, J. B.
    Xia, J. H.
    Wu, J.
    Wang, Y. M.
    Dong, C.
    INTERMETALLICS, 2007, 15 (5-6) : 711 - 715
  • [29] Roles of minor rare-earth elements addition in formation and properties of Cu-Zr-Al bulk metallic glasses
    Deng, Liang
    Zhou, Bingwen
    Yang, Hongshuo
    Jiang, Xin
    Jiang, Boyu
    Zhang, Xingguo
    JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 632 : 429 - 434
  • [30] Formation of Cu-Zr-Al bulk metallic glass composites with improved tensile properties
    Wu, Y.
    Wang, H.
    Wu, H. H.
    Zhang, Z. Y.
    Hui, X. D.
    Chen, G. L.
    Ma, D.
    Wang, X. L.
    Lu, Z. P.
    ACTA MATERIALIA, 2011, 59 (08) : 2928 - 2936