Mechanical and chemical stability of injection-molded microcantilevers used for sensing

被引：0
|
作者：
机构：
[1] [1,Urwyler, Prabitha
[2] Pascual, Alfons
[3] 3,Kristiansen, Per Magnus
[4] 1,Gobrecht, Jens
[5] Müller, Bert
[6] 1,Schift, Helmut
来源：
Schift, H. (helmut.schift@psi.ch) | 1600年 / John Wiley and Sons Inc卷 / 127期
关键词：
Ultraviolet-ozone treatment is used as a standard surface cleaning procedure for removal of molecular organic contamination from analytical and sensing devices. Here; it is applied for injection-molded polymer microcantilevers before characterization and sensing experiments. This article examines the effects of the surface cleaning process using commercial equipment; in particular on the performance and mechanical properties of the cantilevers. It can be shown that the first chemical aging process essentially consist of the cross linking of the polymer chains together with a physical aging of the material. For longer exposure; the expected thermo-oxidative formation of carbonyl groups sets in and an exposure dependent chemical degradation can be detected. A process time of 20 min was found suitable as a trade-off between cleaning and stability. © 2012 Wiley Periodicals; Inc; J; Appl; Polym; Sci; 2013 Copyright © 2012 Wiley Periodicals;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
相关论文
共 50 条
  • [41] Microcantilevers: Sensing chemical interactions via mechanical motion
    Goeders, Karen M.
    Colton, Jonathan S.
    Bottomley, Lawrence A.
    CHEMICAL REVIEWS, 2008, 108 (02) : 522 - 542
  • [42] Mechanical and morphological properties of injection-molded rice husk polypropylene composites
    Aridi, N. A. M.
    Sapuan, S. M.
    Zainudin, E. S.
    AL-Oqla, Faris M.
    INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION, 2016, 21 (04) : 305 - 313
  • [43] Minimizing the Sinkmarks in injection-molded thermoplastics
    Liu, SJ
    Lin, CH
    Wu, YC
    ADVANCES IN POLYMER TECHNOLOGY, 2001, 20 (03) : 202 - 215
  • [44] SUPERCRITICAL DEBINDING OF INJECTION-MOLDED CERAMICS
    CHARTIER, T
    FERRATO, M
    BAUMARD, JF
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1995, 78 (07) : 1787 - 1792
  • [45] Distribution of material in an injection-molded container
    Aasetre, S
    Andreassen, E
    ANTEC '99: PLASTICS BRIDGING THE MILLENNIA, CONFERENCE PROCEEDINGS, VOLS I-III: VOL I: PROCESSING; VOL II: MATERIALS; VOL III: SPECIAL AREAS;, 1999, : 3931 - 3935
  • [46] HOW ADVANCED ARE INJECTION-MOLDED COMPOSITES
    STEDFELD, R
    MATERIALS ENGINEERING, 1980, 91 (01): : 58 - 59
  • [47] INJECTION-MOLDED THERMOSETS CUT COSTS
    WEHRENBERG, RH
    MATERIALS ENGINEERING, 1981, 93 (02): : 46 - 50
  • [48] DESIGNING INJECTION-MOLDED THERMOSET PARTS
    BODNER, SS
    VAILL, EW
    MACHINE DESIGN, 1972, 44 (03) : 98 - &
  • [49] Fabrication of injection-molded diffuser micropumps
    Wu, CH
    Hsu, WC
    Micro- and Nanotechnology: Materials, Processes, Packaging, and Systems II, 2005, 5650 : 313 - 323
  • [50] TEXTURE PATTERN OF INJECTION-MOLDED POLYPROPYLENE
    MENCIK, Z
    FITCHMUN, D
    BULLETIN OF THE AMERICAN PHYSICAL SOCIETY, 1971, 16 (03): : 391 - &
12345