Mechanical and chemical stability of injection-molded microcantilevers used for sensing

被引：0
|
作者：
机构：
[1] [1,Urwyler, Prabitha
[2] Pascual, Alfons
[3] 3,Kristiansen, Per Magnus
[4] 1,Gobrecht, Jens
[5] Müller, Bert
[6] 1,Schift, Helmut
来源：
Schift, H. (helmut.schift@psi.ch) | 1600年 / John Wiley and Sons Inc卷 / 127期
关键词：
Ultraviolet-ozone treatment is used as a standard surface cleaning procedure for removal of molecular organic contamination from analytical and sensing devices. Here; it is applied for injection-molded polymer microcantilevers before characterization and sensing experiments. This article examines the effects of the surface cleaning process using commercial equipment; in particular on the performance and mechanical properties of the cantilevers. It can be shown that the first chemical aging process essentially consist of the cross linking of the polymer chains together with a physical aging of the material. For longer exposure; the expected thermo-oxidative formation of carbonyl groups sets in and an exposure dependent chemical degradation can be detected. A process time of 20 min was found suitable as a trade-off between cleaning and stability. © 2012 Wiley Periodicals; Inc; J; Appl; Polym; Sci; 2013 Copyright © 2012 Wiley Periodicals;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
相关论文
共 50 条
  • [1] Mechanical and Chemical Stability of Injection-Molded Microcantilevers Used for Sensing
    Urwyler, Prabitha
    Pascual, Alfons
    Kristiansen, Per Magnus
    Gobrecht, Jens
    Mueller, Bert
    Schift, Helmut
    JOURNAL OF APPLIED POLYMER SCIENCE, 2013, 127 (04) : 2363 - 2370
  • [2] MECHANICAL ANISOTROPY IN INJECTION-MOLDED POLYPROPYLENE
    FUJIYAMA, M
    AWAYA, H
    KIMURA, S
    JOURNAL OF APPLIED POLYMER SCIENCE, 1977, 21 (12) : 3291 - 3309
  • [3] Ultraviolet-ozone surface cleaning of injection-molded, thermoplastic microcantilevers
    Schift, Helmut (helmut.schift@psi.ch), 1600, John Wiley and Sons Inc (132):
  • [4] Ultraviolet-ozone surface cleaning of injection-molded, thermoplastic microcantilevers
    Urwyler, Prabitha
    Pascual, Alfons
    Mueller, Bert
    Schift, Helmut
    JOURNAL OF APPLIED POLYMER SCIENCE, 2015, 132 (18)
  • [5] Studying the influence of effective density of injection-molded polyurethane on its chemical stability
    Sharipova, A.G.
    Zenitova, L.A.
    Bazhenova, L.N.
    Kauchuk i Rezina, 2001, (03): : 3 - 5
  • [6] MECHANICAL-PROPERTIES OF SELECTED INJECTION-MOLDED THERMOSETS
    KLEINEMEIER, B
    MENGES, G
    POLYMER ENGINEERING AND SCIENCE, 1978, 18 (13): : 996 - 1000
  • [7] INJECTION-MOLDED SEPIOLITE-FILLED POLYPROPYLENE - MECHANICAL-PROPERTIES AND DIMENSIONAL STABILITY
    MORALES, E
    WHITE, JR
    JOURNAL OF MATERIALS SCIENCE, 1988, 23 (12) : 4525 - 4533
  • [8] THE INJECTION-MOLDED CAPSULE
    EITH, L
    STEPTO, RFT
    TOMKA, I
    WITTWER, F
    DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY, 1986, 12 (11-13) : 2113 - 2126
  • [9] Fluorescent sensing using injection-molded planar waveguides.
    Herron, JN
    Durtschi, JD
    Wang, HK
    Terry, AH
    Christensen, DA
    Smith, R
    Astill, M
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 1997, 213 : 212 - ANYL
  • [10] Mechanical behavior of injection-molded starch-based polymers
    Reis, RL
    Cunha, AM
    Allan, PS
    Bevis, MJ
    POLYMERS FOR ADVANCED TECHNOLOGIES, 1996, 7 (10) : 784 - 790
12345