Evaluating process parameters of SLS part of polyamide-12 recycled powder using RSM

被引：0
|
作者：
Rahman, Irfan Ur [1 ]
Ab Wahab, Norfariza Binti [1 ]
Raja Abdullah, Raja Izamshah Bin [1 ]
Rosley, Mohd Idain Fahmy Bin [2 ]
Abu Zaki, Muhammad Syafiq Syazwan [2 ]
Taib, Mohd Taufik [2 ]
机构：
[1] Faculty of Industrial and Manufacturing Technology and Engineering, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, Melaka, Durian Tunggal,76100, Malaysia
[2] Faculty of Mechanical Technology and Engineering, FTKM Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, Durian Tunggal,76100, Malaysia
来源：
Engineering Research Express | 2024年 / 6卷 / 04期
关键词：
Laser heating;
D O I：
10.1088/2631-8695/ad8e2d
中图分类号：
学科分类号：
摘要：
引用
收藏
相关论文
共 50 条
  • [31] EXPERIMENTAL STUDY OF MICROSCOPIC MORPHOLOGY AND MATERIAL PROPERTY FOR RECYCLED POLYAMIDE 12 POWDER IN SELECTIVE LASER SINTERING
    Al Amin, Mohammad Aman Ullah
    Yang, Yiran
    Kobir, Md Humaun
    Di, Lei
    PROCEEDINGS OF ASME 2022 17TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE, MSEC2022, VOL 2, 2022,
  • [32] Optimisation of Process Parameters on Thin Shell Part Using Response Surface Methodology (RSM) and Genetic Algorithm (GA)
    Faiz, J. M.
    Shayfull, Z.
    Nasir, S. M.
    Fathullah, M.
    Hazwan, M. H. M.
    3RD ELECTRONIC AND GREEN MATERIALS INTERNATIONAL CONFERENCE 2017 (EGM 2017), 2017, 1885
  • [33] Effects of build orientation and strain rate on the tensile-shear behaviour of polyamide-12 manufactured via laser powder bed fusion
    Xu, Yuan
    Quino, Gustavo
    Ramakrishnan, Karthik Ram
    Pellegrino, Antonio
    MATERIALS & DESIGN, 2023, 232
  • [34] In situ process monitoring in laser-based powder bed fusion of polyamide 12 using thermal imaging
    Hofman, Joseph
    Wudy, Katrin
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 122 (9-10): : 4127 - 4138
  • [35] In situ process monitoring in laser-based powder bed fusion of polyamide 12 using thermal imaging
    Joseph Hofman
    Katrin Wudy
    The International Journal of Advanced Manufacturing Technology, 2022, 122 : 4127 - 4138
  • [36] Correction to: In situ process monitoring in laser‑based powder bed fusion of polyamide 12 using thermal imaging
    Joseph Hofmann
    Katrin Wudy
    The International Journal of Advanced Manufacturing Technology, 2022, 123 : 2157 - 2157
  • [37] Monitoring the Effects of Selective Laser Sintering (SLS) Build Parameters on Polyamide Using Near Infrared Spectroscopy
    Beard, M. A.
    Ghita, O. R.
    Evans, K. E.
    JOURNAL OF APPLIED POLYMER SCIENCE, 2011, 121 (06) : 3153 - 3158
  • [38] Using X-ray computed tomography to improve the porosity level of polyamide-12 laser sintered parts
    Dewulf, Wim
    Pavan, Michele
    Craeghs, Tom
    Kruth, Jean-Pierre
    CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2016, 65 (01) : 205 - 208
  • [39] Influence of the Origin of Polyamide 12 Powder on the Laser Sintering Process and Laser Sintered Parts
    Schmid, Manfred
    Kleijnen, Rob
    Vetterli, Marc
    Wegener, Konrad
    APPLIED SCIENCES-BASEL, 2017, 7 (05):
  • [40] Optimization of process parameters for the development of finger millet based multigrain extruded snack food fortified with banana powder using RSM
    Sukumar, Aryasree
    Athmaselvi, K. A.
    JOURNAL OF FOOD SCIENCE AND TECHNOLOGY-MYSORE, 2019, 56 (02): : 705 - 712
12345