Mo oxide modified catalysts for direct methanol, formaldehyde and formic acid fuel cells

被引：0
|
作者：
Song, Chaojie [1 ]
Khanfar, Mohammad [1 ]
Pickup, Peter G. [1 ]
机构：
[1] Department of Chemistry, Memorial University of Newfoundland, St. John's, Nfld. A1B 3X7, Canada
来源：
Journal of Applied Electrochemistry | 2006年 / 36卷 / 03期
关键词：
Pt black and PtRu black fuel cell anodes have been modified with Mo oxide and evaluated in direct methanol; formaldehyde and formic acid fuel cells. Mo oxide deposition by reductive electrodeposition from sodium molybdate or by spraying of the fuel cell anode with aqueous sodium molybdate resulted in similar performance gains in formaldehyde cells. At current densities below ca. 20 mA cm-2; cell voltages were 350-450 mV higher when the Pt catalyst was modified with Mo oxide; but these performance gains decreased sharply at higher current densities. For PtRu; voltage gains of up to 125 mV were observed. Modification of Pt and PtRu back catalysts with Mo oxide also significantly improved their activities in direct formic acid cells; but performances in direct methanol fuel cells were decreased. © Springer 2005;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：339 / 345
相关论文
共 50 条
  • [41] Novel Pd-Pb/C bimetallic catalysts for direct formic acid fuel cells
    Yu, Xingwen
    Pickup, Peter G.
    JOURNAL OF POWER SOURCES, 2009, 192 (02) : 279 - 284
  • [42] Highly Active and Highly Poison Tolerant Anodic Catalysts for Direct Formic Acid Fuel Cells
    Lu Xueyi
    Liao Shijun
    Song Huiyu
    PROGRESS IN CHEMISTRY, 2012, 24 (08) : 1437 - 1446
  • [43] Study of the Electrochemical Activities of Mo-Modified Pt Catalysts, for Application as Anodes in Direct Methanol Fuel Cells: Effect of the Aggregation Route
    Ugalde-Reyes, O.
    Hernandez-Maya, R.
    Ocampo-Flores, A. L.
    Alvarez-Ramirez, F.
    Sosa-Hernandez, E.
    Angeles-Chavez, C.
    Roquero, P.
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2015, 162 (03) : H132 - H141
  • [44] ADSORPTION OF METHANOL, FORMALDEHYDE AND FORMIC-ACID ON PD(100) SURFACES MODIFIED BY A SODIUM AND SODIUM-OXIDE OVERLAYER
    EGAWA, C
    DOI, I
    NAITO, S
    TAMARU, K
    SURFACE SCIENCE, 1986, 176 (03) : 491 - 504
  • [45] Characterization of Alternative Anode Catalysts for Direct Formic Acid Fuel Cell
    Yu, Jae Keun
    Lee, Hyo Song
    Kim, Ki Ho
    Kim, Young Chun
    Han, Jong Hee
    Oh, In Hwan
    Rhee, Young Woo
    KOREAN CHEMICAL ENGINEERING RESEARCH, 2006, 44 (03): : 314 - 318
  • [46] Pt-Ru Catalysts Prepared by a Modified Polyol Process for Direct Methanol Fuel Cells
    ZHANG Junmin ZHU Fangfang ZHANG Kunhua LIU Weiping GUAN Weiming State Key Laboratory of Advanced Technologies for Comprehensive Utilization of Platinum Metals Kunming Institute of Precious Metals Kunming China
    贵金属, 2012, 33(S1) (S1) : 222 - 226
  • [47] CONVERSION OF METHANOL, FORMALDEHYDE AND FORMIC-ACID ON THE POLAR FACES OF ZINC-OXIDE
    VOHS, JM
    BARTEAU, MA
    SURFACE SCIENCE, 1986, 176 (1-2) : 91 - 114
  • [48] Formaldehyde, methanol and methyl formate from formic acid reaction over supported metal catalysts
    Redondo, Amaia Beloqui
    Fodor, Daniel
    Brown, Matthew A.
    van Bokhoven, Jeroen A.
    CATALYSIS COMMUNICATIONS, 2014, 56 : 128 - 133
  • [49] EFFECT OF METHANOL, FORMALDEHYDE AND FORMIC ACID ON TISSUE RESPIRATION
    WATTS, DT
    FEDERATION PROCEEDINGS, 1951, 10 (01) : 343 - 343
  • [50] THE EFFECT OF METHANOL, FORMALDEHYDE AND FORMIC ACID ON TISSUE RESPIRATION
    WATTS, DT
    ARCHIVES OF BIOCHEMISTRY AND BIOPHYSICS, 1951, 34 (02) : 391 - 395
12345