Finite element analysis of the compressive properties of 3D integrated sandwich composites

被引：0
|
作者：
Cao, Haijian [1 ]
Qian, Kun [1 ]
Wei, Qufu [1 ]
Li, Hongshun [1 ]
机构：
[1] College of Textile and Clothing, Jiangnan University, Wuxi 214112, China
来源：
Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica | 2011年 / 28卷 / 01期
关键词：
Composite materials - Finite element method - Structural optimization;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
A new structual model was developed for the compressive analysis of 3D integrated sandwich composites by using the finite element software ANSYS. The influence of pile height, pile density and material elastic modulus of the 3D composites on the compressive properties was studied in detail, and the influence characterizations were analyzed and discussed too. The results show that the maximum value of the stress appears in the interface between pile and face-sheet when the 3D composites are subject under compressive loads, in which the composites damage easily. The compressive properties of the 3D composites increase with the increase of the pile density, material elastic molulus, and decrease with that of the pile height. The results provide reference for the structure optimum of the 3D composites.
引用
收藏
页码：230 / 234
相关论文
共 50 条
  • [21] Geometrical Analysis of 3D Integrated Woven Fabric Reinforced Core Sandwich Composites
    Jabbar, Abdul
    Karahan, Mehmet
    Zubair, Muhammad
    Karahan, Nevin
    FIBRES & TEXTILES IN EASTERN EUROPE, 2019, 27 (01) : 45 - 50
  • [22] Investigation of out of plane compressive strength of 3D printed sandwich composites
    Dikshit, V.
    Yap, Y. L.
    Goh, G. D.
    Yang, H.
    Lim, J. C.
    Qi, X.
    Yeong, W. Y.
    Wei, J.
    37TH RISO INTERNATIONAL SYMPOSIUM ON MATERIALS SCIENCE, 2016, 139
  • [23] Finite element analysis of damage behavior of 3D woven tubular composites
    Wang, Xin-Feng
    Liu, Jia
    Zhou, Guang-Ming
    Nanjing Li Gong Daxue Xuebao/Journal of Nanjing University of Science and Technology, 2011, 35 (01): : 113 - 117
  • [24] Finite Element Analysis of 2.5D Woven Composites, Part I: Microstructure and 3D Finite Element Model
    Jian Song
    Weidong Wen
    Haitao Cui
    Hongjian Zhang
    Ying Xu
    Applied Composite Materials, 2016, 23 : 29 - 44
  • [25] Finite Element Analysis of 2.5D Woven Composites, Part I: Microstructure and 3D Finite Element Model
    Song, Jian
    Wen, Weidong
    Cui, Haitao
    Zhang, Hongjian
    Xu, Ying
    APPLIED COMPOSITE MATERIALS, 2016, 23 (01) : 29 - 44
  • [26] Effect of Structural Differences on the Mechanical Properties of 3D Integrated Woven Spacer Sandwich Composites
    Zhu, Lvtao
    Bin Rahman, Mahfuz
    Wang, Zhenxing
    MATERIALS, 2021, 14 (15)
  • [27] A New 3D Finite Element for Sandwich Beams With a Viscoelastic Core
    Amichi, Kamel
    Atalla, Noureddine
    JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME, 2009, 131 (02): : 0210101 - 0210109
  • [28] A novel finite element method for predicting the tensile properties of 3D braided composites
    Yu, Guoqing
    Shi, Boqiang
    Shen, Yanhua
    Gu, Jie
    MATERIALS RESEARCH EXPRESS, 2019, 6 (12)
  • [29] Evaluation of two finite element formulations for a rapid 3D stress analysis of sandwich structures
    Wetzel, A
    Kärger, L
    Rolfes, R
    Rohwer, K
    COMPUTERS & STRUCTURES, 2005, 83 (19-20) : 1537 - 1545
  • [30] The Dynamic Compressive Properties of 3D Orthogonal Woven Composites
    Zhou, Kai
    Xiong, Jie
    Mao, Mingzhong
    Yang, Bin
    PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON ADVANCED TEXTILE MATERIALS & MANUFACTURING TECHNOLOGY, 2008, : 498 - 504
12345