Updating semi-rigidity of joints and boundary conditions of structures using a hybrid finite element

被引：0

作者：

School of Transportation Science and Engineering, Harbin Institute of Technology, Harbin 150090, China ^{[1
]}

不详 ^{[2
]}

机构：

来源：

J Vib Shock | 2009年 / 9卷 / 39-47期

关键词：

Modal analysis - Rigid structures - Shear flow - Rigidity - Finite element method;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Here, updating finite element model of semi-rigid jointed structures was studied. Firstly, a hybrid finite element was proposed, it was composed of a beam element with two connections at both ends, in order to consider the semi-rigidity of joints with both rotation and shear effect. This hybrid finite element was suitable for model updating, and the stiffness matrix and mass matrix of the proposed element were described. Secondly, a parameterized scheme to update the boundary support parameters was presented. Finally, the proposed hybrid finite element and the parameterized method were experimentally studied by updating the finite element of a 14-bay frame with tested modal parameters. The results showed that the proposed methods were suitable for model updating of semi-rigid jointed structures.

引用

共 50 条

[31] Updating the finite element model of bridge structures by an improved Taguchi updating method
Liu, Y.
Li, H.
Duan, Z.
Yao, Y.
BRIDGE MAINTENANCE, SAFETY, MANAGEMENT AND LIFE-CYCLE OPTIMIZATION, 2010, : 795 - +
[32] FINITE-ELEMENT ANALYSIS OF MMIC STRUCTURES AND ELECTRONIC PACKAGES USING ABSORBING BOUNDARY-CONDITIONS
WANG, JS
MITTRA, R
IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES, 1994, 42 (03) : 441 - 449
[33] Analysis of cracked tubular joints using coupled finite and boundary element methods
Lie, ST
Li, G
Cen, Z
ENGINEERING STRUCTURES, 2000, 22 (03) : 272 - 283
[34] Boundary condition focused finite element model updating for bridges
Hester, David
Koo, Ki
Xu, Yan
Brownjohn, James
Bocian, Mateusz
ENGINEERING STRUCTURES, 2019, 198
[35] A hybrid wave and finite element/boundary element method for predicting the vibroacoustic characteristics of finite-width complex structures
Yang, Yi
Kingan, Michael
JOURNAL OF SOUND AND VIBRATION, 2024, 582
[36] A Hybrid Finite Element Boundary Element Method for Periodic Structures on Non-Periodic Meshes Using Interior Penalty Method
Lee, Seung-Cheol
Rawat, Vineet
Lee, Jin-Fa
2008 IEEE ANTENNAS AND PROPAGATION SOCIETY INTERNATIONAL SYMPOSIUM, VOLS 1-9, 2008, : 3186 - 3189
[37] Anisotropic Heat Analysis Using Hybrid Finite Element Model with Element Boundary Integrals
Wang, Hui
Zhao, Xin Juan
ADVANCES IN MECHANICAL DESIGN, PTS 1 AND 2, 2011, 199-200 : 1613 - +
[38] Model updating and parameters estimation incorporating flexible joints and boundary conditions
Wang, Shuqing
INVERSE PROBLEMS IN SCIENCE AND ENGINEERING, 2014, 22 (05) : 727 - 745
[39] Structural characteristic responses for finite element model updating of structures
Zhou, Linren
Wang, Lei
Ou, Jinping
SENSORS AND SMART STRUCTURES TECHNOLOGIES FOR CIVIL, MECHANICAL, AND AEROSPACE SYSTEMS 2014, 2014, 9061
[40] Finite element modelling of semi-rigid composite joints
Kattner, M
Crisinel, M
COMPUTERS & STRUCTURES, 2000, 78 (1-3) : 341 - 353

← 1 2 3 4 5 →