Design and Experiment of Chinese Cabbage Seed Threshing Device Combined with Elastic Short-rasp-bar Tooth

被引：0
|
作者：
Wang S. [1 ]
Lu M. [1 ]
Hu J. [2 ]
Chen P. [1 ]
Ji J. [1 ]
Wang F. [1 ]
机构：
[1] College of Agricultural Equipment Engineering, Henan University of Science and Technology, Luoyang
[2] College of Agricultural Engineering, Jiangsu University, Zhenjiang
来源：
Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery | 2021年 / 52卷 / 11期
关键词：
Chinese cabbage seed; Elastic short-rasp-bar tooth; Flexible round head spike; Threshing device;
D O I：
10.6041/j.issn.1000-1298.2021.11.009
中图分类号：
学科分类号：
摘要：
The Chinese cabbage seed market is developing rapidly, and the demand for mechanized harvest is increasing day by day due to the large area and industrial planting. Aiming at the technical problems of low efficiency of artificial harvest and high seed breaking rate by conventional threshing method, a threshing device for Chinese cabbage seed was designed, which was composed of threshing elements such as elastic short-rasp-bar tooth, flexible round head spike tooth and circular tube concave plate. The finite element modal analysis of threshing cylinder was carried out with ANSYS Workbench, and the rationality of structure of threshing cylinder was verified. The feeding amount, cylinder speed and threshing clearance were selected as experimental factors, and the response surface optimization and field comparison experiments were carried out based on the experimental indicators of seed loss rate and breaking rate. Through experiments, the mathematical model between each experiment factor and experiment index was established, the influence of each factor on the index was analyzed, and the structure and working parameters of the device were optimized. The experimental results showed that when the cylinder speed was 726 r/min, the threshing clearance was 22.3 mm, and the feeding amount was 1.73 kg/s, the seed loss rate was 0.68% and the breaking rate was 0.39%. The experimental results met the design requirements, and it can realize the mechanized threshing operation of Chinese cabbage seeds with a low breaking rate during the harvest period. © 2021, Chinese Society of Agricultural Machinery. All right reserved.
引用
收藏
页码：86 / 94
页数：8
相关论文
共 27 条
  • [11] WANG Chuanxu, CHEN Meizhou, WANG Jianxiang, Et al., Design and experiment of axial flow corn flexible threshing device, Journal of Agricultural Mechanization Research, 43, 4, pp. 47-53, (2021)
  • [12] LI Yaoming, LI Hongchang, XU Lizhang, Comparative experiments on threshing performance between short-rasp-bar tooth cylinder and spike tooth cylinder, Transactions of the CSAE, 24, 3, pp. 139-142, (2008)
  • [13] LI Yaoming, LI Hongchang, XU Lizhang, Et al., Performance test of short-rasp-bar of axial flow threshing and separating unit, Transactions of the Chinese Society for Agricultural Machinery, 40, 7, pp. 88-92, (2009)
  • [14] BARAN M, DURGUT M, AKTAS T, Et al., Determination of some physical properties of rapeseed[J], International Journal of Engineering Technologies, 2, 2, pp. 49-55, (2016)
  • [15] SKUBISZ G., Development of studies on the mechanical properties of winter rape stems, International Agrophysics, 15, 3, pp. 197-200, (2001)
  • [16] SUN Jingxin, YANG Zuomei, GUO Yuming, Et al., Compression mechanical properties and crack formation law of millet grain, Transactions of the CSAE, 33, 18, pp. 306-314, (2017)
  • [17] MA Zheng, LI Yaoming, XU Lizhang, Experimental research of elastic mechanics of rape stalks, Journal of Agricultural Mechanization Research, 38, 5, pp. 187-191, (2016)
  • [18] REN Shuguang, CHEN Sai, WU Mingliang, Et al., Limit stress at corner cracking of rape's pod in mature period measured by mechanical test, Journal of Hunan Agricultural University (Natural Science), 44, 5, pp. 559-564, (2018)
  • [19] QING Yiren, LI Yaoming, MA Zheng, Et al., Technology of 2-DOF collision testing for rape pod shatter resistance, Transactions of the CSAE, 35, 5, pp. 33-40, (2019)
  • [20] FAN Chenlong, CUI Tao, ZHANG Dongxing, Et al., Design and test of low-damage combined corn threshing and separating device[J/OL], Transactions of the Chinese Society for Agricultural Machinery, 50, 4, pp. 113-123, (2019)
123