Influence factors of fretting wear of bolted joints structure based on acoustic emission

被引：0
|
作者：
Lu, Ping [1 ]
Wang, Ning [1 ]
Tao, Jun-Lin [1 ]
Liu, Xin-En [2 ]
机构：
[1] School of Civil Engineering and Architecture, Southwest University of Science and Technology, Mianyang 621010, China
[2] Institute of System Engineering, China Academy of Engineering Physics, Mianyang 621900, China
来源：
Mocaxue Xuebao/Tribology | 2010年 / 30卷 / 05期
关键词：
Bolts - Voltage measurement - Acoustic emission testing;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The influence factors of fretting wear of bolted joints structure were carried out by using acoustic emission (AE) based on fretting wear theory, and special attention was paid on torque, acceleration and frequency of the external stimulation. Results showed that AE can characterize the degree of fretting wear of bolted joints structure. Fretting wear mainly depended on torque, and was of different sensitivity to the acceleration of the external stimulation. The other method and equipment will be needed to be adopted for the influence of the frequency of the external simulation for the further research. A new idea and a feasible on-line monitor method have been provided for fretting wear.
引用
收藏
页码：443 / 447
相关论文
共 50 条
  • [21] Understanding the influence of graphene-based lubricant/coating during fretting wear of zircaloy
    Mishra, Dewika
    Maurya, Rita
    Verma, Vaibhav
    Balani, Kantesh
    Krishna, K. V. Mani
    Srivastava, Dinesh
    Ganesha, G. N.
    Singha, Utpal
    Mukhopadhyay, Amartya
    WEAR, 2023, 512
  • [22] Wear detection by means of wavelet-based acoustic emission analysis
    Baccar, D.
    Soeffker, D.
    MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2015, 60-61 : 198 - 207
  • [23] Study on accurate tool wear monitoring based on acoustic emission signal
    Cui Yinhu
    Wang Guofeng
    Peng Dongbiao
    Feng Xiaoliang
    Zhang Lu
    Liu Chang
    FOURTH INTERNATIONAL SEMINAR ON MODERN CUTTING AND MEASUREMENT ENGINEERING, 2011, 7997
  • [24] Tool wear monitoring based on the combination of machine vision and acoustic emission
    Chen, Meiliang
    Li, Mengdan
    Zhao, Linfeng
    Liu, Jiachen
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2023, 125 (7-8): : 3881 - 3897
  • [25] Tool wear monitoring based on the combination of machine vision and acoustic emission
    Meiliang Chen
    Mengdan Li
    Linfeng Zhao
    Jiachen Liu
    The International Journal of Advanced Manufacturing Technology, 2023, 125 : 3881 - 3897
  • [26] On the condition monitoring of bolted joints through acoustic emission and deep transfer learning: generalization, ordinal loss, and super-convergence
    Ramasso, Emmanuel
    Teloli, Rafael de Oliveira
    Marcel, Romain
    STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL, 2024,
  • [27] On the condition monitoring of bolted joints through acoustic emission and deep transfer learning: generalization, ordinal loss, and super-convergence
    Ramasso, Emmanuel
    Teloli, Rafael de Oliveira
    Marcel, Romain
    Structural Health Monitoring, 2024,
  • [28] Bolted lap joint loosening monitoring and damage identification based on acoustic emission and machine learning
    Wang, Xiao
    Yue, Qingrui
    Liu, Xiaogang
    MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2024, 220
  • [29] Fatigue and fretting fatigue life prediction of double-lap bolted joints using continuum damage mechanics-based approach
    Sun, Ying
    Voyiadjis, George Z.
    Hu, Weiping
    Shen, Fei
    Meng, Qingchun
    INTERNATIONAL JOURNAL OF DAMAGE MECHANICS, 2017, 26 (01) : 162 - 188
  • [30] Influence of glow plasma Co-based alloying layer on sliding wear and fretting wear resistance of titanium alloy
    Ma, Amin
    Liu, Daoxin
    Tang, Changbin
    Zhang, Xiaohua
    Liu, Chengsong
    TRIBOLOGY INTERNATIONAL, 2018, 125 : 85 - 94
12345