A model on the CaO multicyclic conversion in the Ca-looping process

被引：0

作者：

机构：

[1] Valverde, Jose Manuel

来源：

Valverde, J.M. (jmillan@us.es) | 1600年 / Elsevier B.V., Netherlands卷 / 228期

关键词：

The CaO conversion of CO2 sorbents subjected to repeated series of carbonation/calcination cycles is investigated as affected by thermal pretreatment. The behavior of nonpretreated sorbents is characterized by the progressive sintering of the initial CaO skeleton derived from a quick preheating of its precursor. As a consequence; CaO conversion suffers a drastic decrease in the first cycles and gradually converges towards a residual value. The evolution of conversion in the first cycles for pretreated sorbents is determined by a diverse mechanism; which is mainly characterized by the growth of a renewed soft skeleton due to promoted solid-state diffusive carbonation; which leads to an increase of conversion with the cycle number up to a maximum value. A mathematical model is proposed based on the balance between the surface area loss due to sintering in the calcination stage of each cycle and the surface area gain due to regeneration of the skeleton. A key feature to describe self-reactivation is that renovation of the soft skeleton becomes progressively less efficient as the number of cycles builds up. An extensive series of data reported in the literature has been analyzed in the light of the proposed model; which has served to quantify the level of self-reactivation as affected by a wide variety of experimental conditions such as preheating temperature and duration; hydration; calcination under a CO2 enriched atmosphere; grinding; addition of thermally stable dopants; and presence of foreign ions in the limestone. © 2013 Elsevier B.V;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Journal article (JA)

引用

共 50 条

[41] Multi-scale modelling and simulation of Ca-looping cycle process for CO2 post-combustion capture
Pinheiro, Carla I. C.
Filipe, Rui
Torres, Miguel Abreu
Silva, Joao M.
Matos, Henrique A.
28TH EUROPEAN SYMPOSIUM ON COMPUTER AIDED PROCESS ENGINEERING, 2018, 43 : 291 - 292
[42] Modified Ca-Looping materials for directly capturing solar energy and high-temperature storage
Teng, Liang
Xuan, Yimin
Da, Yun
Liu, Xianglei
Ding, Yulong
ENERGY STORAGE MATERIALS, 2020, 25 : 836 - 845
[43] Study on the performance of coal-fired power plant integrated with Ca-looping CO2 capture system with recarbonation process
Duan, Liqiang
Feng, Tao
Jia, Shilun
Yu, Xiaohui
ENERGY, 2016, 115 : 942 - 953
[44] Improved performance of modified CaO-Al2O3 based pellets for CO2 capture under realistic Ca-looping conditions
Teixeira, Paula
Bacariza, Carmen
Mohamed, Ismail
Pinheiro, Carla I. C.
JOURNAL OF CO2 UTILIZATION, 2022, 61
[45] Optimized Ca-looping thermochemical energy storage under dynamic operation for concentrated solar power
Pascual, S.
Romeo, L. M.
Lisbona, P.
JOURNAL OF ENERGY STORAGE, 2023, 68
[46] Kinetics of Calcination of Partially Carbonated Particles in a Ca-Looping System for CO2 Capture
Martinez, I.
Grasa, G.
Murillo, R.
Arias, B.
Abanades, J. C.
ENERGY & FUELS, 2012, 26 (02) : 1432 - 1440
[47] Role of precalcination and regeneration conditions on postcombustion CO2 capture in the Ca-looping technology
Valverde, J. M.
Sanchez-Jimenez, P. E.
Perez-Maqueda, L. A.
APPLIED ENERGY, 2014, 136 : 347 - 356
[48] Ca-looping for postcombustion CO2 capture: A comparative analysis on the performances of dolomite and limestone
Valverde, J. M.
Sanchez-Jimenez, P. E.
Perez-Maqueda, L. A.
APPLIED ENERGY, 2015, 138 : 202 - 215
[49] A Modeling and Simulation Study to Accommodate Sorbent Sintering in a Ca-Looping System Coupled with a Cement Plant
Hejazi, Bijan
Montagnaro, Fabio
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2024, 63 (25) : 11069 - 11081
[50] Thermodynamics and kinetics analysis of Ca-looping for CO2 capture: Application of carbide slag
Yang, Jie
Ma, Liping
Liu, Hongpan
Wei, Yi
Keomounlath, Bounkhong
Dai, Quxiu
FUEL, 2019, 242 : 1 - 11

← 1 2 3 4 5 →