Analysis of secondary flow in shell-side channel of trisection helix heat exchangers

被引:0
|
作者
Wang, Weihan [1 ]
Chen, Yaping [1 ]
Cao, Ruibing [1 ]
Shi, Mingheng [1 ]
机构
[1] School of Energy and Environment, Southeast University, Nanjing 210096, China
关键词
Heat exchangers - Heat transfer - Shells (structures) - Vortex flow;
D O I
暂无
中图分类号
学科分类号
摘要
The flow characteristics of shell-side fluid in the tube-and-shell heat exchangers with trisection helical baffles with 35° inclined angles are numerically analyzed. The secondary flow distribution of the fluid in the shell-side channel is focused on. The results on meridian planes indicate that in the shell-side channel, the center part of fluid has an outward tendency because of the centrifugal force, and the peripheral region fluid has an inward tendency under the centripetal force. So in a spiral cycle, the fluid is divided into the upper and lower beams of streamlines, at the same time the Dean vortices are formed near the left baffle, and then the fluid turns to centripetal flow near the right baffle. Finally the two beams of streamlines merge in the main flow. The results of a number of parallel slices between two parallel baffles with the same sector in a swirl cycle also show the existence of the secondary flow and some backward flows at the V-gaps of the adjacent baffles. The secondary flows have a positive effect on mixing fluid by promoting the momentum and mass exchange between fluid particles near the tube wall and in the main stream, and thus they will enhance the heat transfer of the helix heat exchanger. Copyright.
引用
收藏
页码:426 / 430
相关论文
共 50 条
  • [31] Study on effects of structural parameters on shell-side heat transfer enhancement in spiral wound heat exchangers
    Gao X.
    Zhou G.
    Tu S.
    Huagong Xuebao/CIESC Journal, 2019, 70 (07): : 2456 - 2471
  • [32] EXPERIMENTAL STUDY ON SHELL SIDE HEAT TRANSFER PERFORMANCE OF CIRCUMFERENTIAL OVERLAP TRISECTION HELICAL BAFFLE HEAT EXCHANGERS
    Chen, Yaping
    Cao, Ruibing
    Wu, Jiafeng
    Dong, Gong
    Sheng, Yanjun
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2011, VOL 10, PTS A AND B, 2012, : 27 - 33
  • [33] Shell-side single-phase flow and heat transfer in shell-and-tube heat exchangers (Part III: Transfer coefficients in a tube bundle)
    Matsushima, Hitoshi
    Nakayama, Wataru
    Yanagida, Takehiko
    Kudo, Akio
    Heat Transfer - Japanese Research, 1988, 17 (06): : 60 - 73
  • [34] METHOD TO DESIGN SHELL-SIDE PRESSURE-DROP CONSTRAINED TUBULAR HEAT-EXCHANGERS
    SINGH, KP
    HOLTZ, M
    MECHANICAL ENGINEERING, 1977, 99 (01) : 112 - 112
  • [35] EFFECT OF TANGENTIAL AND RADIAL SHELL-SIDE INLETS ON THE THERMOHYDRAULIC PERFORMANCE OF SHELL-AND-TUBE HEAT EXCHANGERS.
    Aronov, I.Z.
    Gomon, V.I.
    1985, (17):
  • [36] SHELL-SIDE HEAT-TRANSFER IN DOUBLE-SEGMENTALLY BAFFLED CYLINDRICAL SHELL-AND-TUBE EXCHANGERS
    GAY, B
    JENKINS, JD
    MACKLEY, NV
    LETTERS IN HEAT AND MASS TRANSFER, 1982, 9 (01): : 39 - 47
  • [37] Experimental and Numerical Investigation on Shell-side Performance of Multilayer Spiral-Wound Heat Exchangers
    Lu, Xing
    Du, Xueping
    Zhang, Sen
    Zeng, Min
    Wang, Qiuwang
    16TH INTERNATIONAL CONFERENCE ON PROCESS INTEGRATION, MODELLING AND OPTIMISATION FOR ENERGY SAVING AND POLLUTION REDUCTION (PRES'13), 2013, 35 : 445 - 450
  • [38] METHOD TO DESIGN SHELL-SIDE PRESSURE-DROP CONSTRAINED TUBULAR HEAT-EXCHANGERS
    SINGH, KP
    HOLTZ, M
    JOURNAL OF ENGINEERING FOR POWER-TRANSACTIONS OF THE ASME, 1977, 99 (03): : 441 - 448
  • [39] A MODEL SYSTEM FOR STUDYING FOULING AND CORROSION IN SHELL-SIDE COOLING WATER HEAT-EXCHANGERS
    SORACCO, RJ
    WILDE, EW
    MAYACK, LA
    POPE, DH
    MATERIALS PERFORMANCE, 1984, 23 (11) : 35 - 39
  • [40] NUMERICAL-METHODS FOR THE ANALYSIS OF FLOW AND HEAT-TRANSFER IN A SHELL-AND-TUBE HEAT-EXCHANGER WITH SHELL-SIDE CONDENSATION
    CUMO, M
    TWO-PHASE FLOW HEAT EXCHANGES: THERMAL-HYDRAULIC FUNDAMENTALS AND DESIGN, 1988, 143 : 829 - 847