Effects of cooling rates on solidification of CuCr25 alloys

被引：0
|
作者：
Wang, Youhong
Sun, Zhanbo
Zhou, Xuan
Song, Xiaoping
机构：
[1] Xi'an Jiaotong University, Xi'an 710049, China
[2] Taiyuan Science and Technology University, Taiyuan 030024, China
来源：
Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering | 2006年 / 35卷 / 08期
关键词：
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The microstructures and solidification processes of CuCr25 alloys are studied under different cooling rates in the present paper. With increasing of the cooling rate, the microstructures of CuCr25 alloys become finer and finer. When the cooling rate is up to 107K/s, nano-microstructures can be obtained. When the cooling rate is less than or equal 103K/s, the solidification process of CuCr25 alloys belongs to a general solidification process; if the cooling rate is >104K/s, it belongs to the liquid phase separation process. In rapid solidification process, there is no new phase formed in CuCr25 alloys, but the solubility of Cu in Cr-rich phase and Cr in Cu-rich phase will increase.
引用
收藏
页码：1289 / 1293
相关论文
共 50 条
  • [21] Preparation of CuCr25 alloy by spray casting
    Tian, Chong
    Yang, Lin
    Chen, Guiyun
    Zhao, Jiuzhou
    Cailiao Yanjiu Xuebao/Chinese Journal of Materials Research, 2005, 19 (06): : 639 - 643
  • [22] Microstructures and properties of spray formed CuCr25 alloy
    Zhang, YA
    Liu, HW
    Zhu, BH
    Wei, YG
    Xiong, BQ
    Shi, LK
    Zhang, JS
    PRICM 5: THE FIFTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-5, 2005, 475-479 : 2853 - 2856
  • [23] Electrical Properties of Nanocrystalline CuCr25 Contact Material
    Zhao, Laijun
    Li, Zhenbiao
    Shi, Kunyu
    He, Junjia
    Li, Huijie
    IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, 2013, 3 (04): : 625 - 632
  • [24] Effect of substrate temperature on microstructure and properties of the CuCr25 alloys produced by electron beam cladding
    Durakov, V.
    Gnyusov, S.
    Schneider, A.
    Popov, S.
    Lavrinovich, V.
    Batrakov, A.
    Dampilon, B.
    PROCEEDINGS OF THE 2014 26TH INTERNATIONAL SYMPOSIUM ON DISCHARGES AND ELECTRICAL INSULATION IN VACUUM (ISDEIV-2014), 2014, : 525 - 528
  • [25] Characteristics of cathode spot motion on nanocrystalline CuCr25 alloy
    Wang Qingfeng
    Cui Shumao
    Zhang Ruili
    Yang Shengchun
    Yang Zhimao
    Ding Bingjun
    RARE METAL MATERIALS AND ENGINEERING, 2008, 37 (04) : 641 - 643
  • [26] DC Vacuum Arc Lifetime of Contact Materials CuCr50 and CuCr25
    Zhang, Jin
    Chang, Linjing
    Han, Guiquan
    He, Shaohua
    Li, Shimin
    2017 4TH INTERNATIONAL CONFERENCE ON ELECTRIC POWER EQUIPMENT-SWITCHING TECHNOLOGY (ICEPE-ST), 2017, : 441 - 443
  • [27] Effects of Ni and Co on microstructure and characteristics of CuCr25 prepared by vacuum induction melting
    Zhang, CY
    Wang, J
    Zhang, H
    Ding, BJ
    RARE METAL MATERIALS AND ENGINEERING, 2001, 30 (04) : 286 - 289
  • [28] Effects of Ni and Co on Microstructure and Characteristics of CuCr25 Prepared by Vacuum Induction Melting
    Zhang, Chengyu
    Wang, Jiang
    Zhang, Hui
    Ding, Bingjun
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2001, 30 (04): : 288 - 289
  • [29] Preparation of CuCr25 contact materials by vacuum induction melting
    Zhang, Chengyu
    Yang, Zhimao
    Wang, Yaping
    Ding, Bingjun
    Guo, Yong
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2006, 178 (1-3) : 283 - 286
  • [30] Preparation and Mechanical Properties of Graphene Reinforced CuCr25 Composites
    石墨烯强化CuCr25合金的制备与性能
    Xiao, Wenkai (xiaowenkai2003@163.com), 1600, Science Press (46):
12345