Amine-terminated poly(ethylene glycol) benzoate (ATPEGB)-modified epoxy: Mechanical and thermal properties

被引:0
|
作者
Samanta, B.C. [1 ]
Maity, T. [1 ]
Dalai, S. [1 ]
Banthia, A.K. [2 ]
机构
[1] Department of Chemistry and Chemical Technology, Vidyasagar University, Midnapore-721102, India
[2] Materials Science Centre, Indian Institute of Technology, Kharagpur-721302, India
来源
关键词
Amine-terminated poly(ethylene glycol) benzoate (ATPEGB); synthesized from the esterification reaction of poly(ethylene glycol) (PEG) with 4-amino benzoic acid; was used to modify the toughness of bisphenol-A diglycidyl ether epoxy resin (DGEBA) cured with room temperature curing agent; triethylene tetramine. ATPEGB was characterized by FT-IR and H-NMR spectroscopies; viscosity measurements; solubility parameter calculation and molecular weight determination with gel-permeation chromatography (GPC). The modified epoxy network was evaluated for its impact; adhesive; tensile; flexural and thermal properties. Improvement in mechanical properties depends upon the concentration of the ATPEGB modifier. The optimum properties were obtained at 12.5 phr (parts per hundred parts of resin) concentration of the modifier. The ATPEGB modified cured epoxy was thermally stable up to 315°C. The morphology of cured epoxy was also analyzed by scanning electron microscopy (SEM) investigation of fracture surfaces. © VSP 2006;
D O I
暂无
中图分类号
学科分类号
摘要
Journal article (JA)
引用
收藏
页码:491 / 502
相关论文
共 50 条
  • [31] Toughening of Epoxy Resin with Solid Amine Terminated Poly(ethy-lene glycol) Benzoate and Effect of Red Mud Waste Particles
    B.C.Samanta
    T.Maity
    S.Dalai
    A.K.Banthia
    JournalofMaterialsScience&Technology, 2008, (02) : 272 - 278
  • [32] Effect of amine-terminated butadiene-acrylonitrile/clay combinations on the structure and properties of epoxy nanocomposites
    Kelnar, Ivan
    Rotrekl, Jakub
    Kapralkova, Ludmila
    Hromadkova, Jirina
    Strachota, Adam
    JOURNAL OF APPLIED POLYMER SCIENCE, 2012, 125 (05) : 3477 - 3483
  • [33] Poly(lactic acid)/Poly(ethylene glycol) Blends: Mechanical, Thermal And Morphological Properties
    Bijarimi, M.
    Ahmad, S.
    Rasid, R.
    Khushairi, M. A.
    Zakir, M.
    PROCEEDINGS OF THE 5TH INTERNATIONAL CONGRESS IN ADVANCES IN APPLIED PHYSICS AND MATERIALS SCIENCE CONGRESS & EXHIBITION (APMAS '15), 2016, 1727
  • [34] Amine-terminated hyperbranched polyamide covalent functionalized graphene oxide-reinforced epoxy nanocomposites with enhanced toughness and mechanical properties
    Li, Jiongjiong
    Zhu, Wenjie
    Zhang, Shifeng
    Gao, Qiang
    Li, Jianzhang
    Zhang, Wei
    POLYMER TESTING, 2019, 76 : 232 - 244
  • [35] Synthesis and properties of biodegradable elastomeric epoxy modified polyurethanes based on poly(ε-caprolactone) and poly(ethylene glycol)
    Yeganeh, H
    Lakouraj, MM
    Jamshidi, S
    EUROPEAN POLYMER JOURNAL, 2005, 41 (10) : 2370 - 2379
  • [37] Enhanced thermal stability and mechanical performance of epoxy resin with amine-terminated aromatic amide oligomer: unveiling the ring-opening curing phenomenon
    Qamar, M. Tariq
    Bahadur, Ali
    Iqbal, Shahid
    Zidan, Ammar
    Mahmood, Sajid
    Ahmed, D.
    Akram, Nadia
    Abid, H.
    Qayyum, Muhammad Abdul
    Awwad, Nasser S.
    Ibrahium, Hala A.
    Akhter, Toheed
    JOURNAL OF POLYMER RESEARCH, 2024, 31 (11)
  • [38] Thermal, crystallization, mechanical and decomposition properties of poly(lactic acid) plasticized with poly(ethylene glycol)
    Wang, Bing
    Hina, Kanza
    Zou, Hantao
    Zuo, Danying
    Yi, Changhai
    JOURNAL OF VINYL & ADDITIVE TECHNOLOGY, 2018, 24 : E154 - E163
  • [39] The Preparation and Properties of the E-51 Epoxy Resin Modified by Epoxy-Terminated Hyperbranched Poly (Amine-Ester)
    Kou, Da-kai
    Feng, Wen-ping
    Zhang, Long
    PROCEEDINGS OF THE 7TH NATIONAL CONFERENCE ON CHINESE FUNCTIONAL MATERIALS AND APPLICATIONS (2010), VOLS 1-3, 2010, : 1037 - 1041
  • [40] Thermal Properties of Networks Prepared from α,ω-Diepoxy Terminated Poly(ethylene glycol)s and Aliphatic Polyamines
    Stanescu, Paul O.
    Cursaru, Bogdan
    Teodorescu, Mircea
    MATERIALE PLASTICE, 2009, 46 (04) : 419 - 425