Amine-terminated poly(ethylene glycol) benzoate (ATPEGB)-modified epoxy: Mechanical and thermal properties

被引：0
|
作者：
Samanta, B.C. [1 ]
Maity, T. [1 ]
Dalai, S. [1 ]
Banthia, A.K. [2 ]
机构：
[1] Department of Chemistry and Chemical Technology, Vidyasagar University, Midnapore-721102, India
[2] Materials Science Centre, Indian Institute of Technology, Kharagpur-721302, India
来源：
Journal of Adhesion Science and Technology | 2006年 / 20卷 / 06期
关键词：
Amine-terminated poly(ethylene glycol) benzoate (ATPEGB); synthesized from the esterification reaction of poly(ethylene glycol) (PEG) with 4-amino benzoic acid; was used to modify the toughness of bisphenol-A diglycidyl ether epoxy resin (DGEBA) cured with room temperature curing agent; triethylene tetramine. ATPEGB was characterized by FT-IR and H-NMR spectroscopies; viscosity measurements; solubility parameter calculation and molecular weight determination with gel-permeation chromatography (GPC). The modified epoxy network was evaluated for its impact; adhesive; tensile; flexural and thermal properties. Improvement in mechanical properties depends upon the concentration of the ATPEGB modifier. The optimum properties were obtained at 12.5 phr (parts per hundred parts of resin) concentration of the modifier. The ATPEGB modified cured epoxy was thermally stable up to 315°C. The morphology of cured epoxy was also analyzed by scanning electron microscopy (SEM) investigation of fracture surfaces. © VSP 2006;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：491 / 502
相关论文
共 50 条
  • [1] Amine-terminated poly(ethylene glycol) benzoate (ATPEGB)-modified epoxy: mechanical and thermal properties
    Samanta, B. C.
    Maity, T.
    Dalai, S.
    Banthia, A. K.
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2006, 20 (06) : 491 - 502
  • [2] Amine terminated poly(ethylene glycol) benzoate modified epoxy networks
    Samanta, BC
    Maity, T
    Kar, S
    Banthia, AK
    PIGMENT & RESIN TECHNOLOGY, 2005, 34 (01) : 4 - 11
  • [3] Electrodeposition of amine-terminated poly(ethylene glycol) to titanium surface
    Tanaka, Yuta
    Doi, Hisashi
    Iwasaki, Yasuhiko
    Hiromoto, Sachiko
    Yoneyama, Takayuki
    Asami, Katsuhiko
    Imai, Hachiro
    Hanawa, Takao
    MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS, 2007, 27 (02): : 206 - 212
  • [4] Development and Characterization of Amine Terminated Poly(Ethylene Glycol) Benzoate Modified Epoxy and E Glass Fiber Composites
    Jena, Rajeeb K.
    Bhat, A. H.
    Maji, S.
    Behera, D.
    Banthia, A. K.
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2009, 28 (20) : 2539 - 2548
  • [5] Preparation and thermal stability of amine-terminated polyesterimide modified epoxy resin
    Gui, Dayong
    Miao, Xin
    Zeng, Guangfu
    Liu, Jianhong
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2013, 24 (11) : 4614 - 4620
  • [6] Preparation and thermal stability of amine-terminated polyesterimide modified epoxy resin
    Dayong Gui
    Xin Miao
    Guangfu Zeng
    Jianhong Liu
    Journal of Materials Science: Materials in Electronics, 2013, 24 : 4614 - 4620
  • [7] Low-fouling amine-terminated poly(ethylene glycol) thin layers and effect of immobilization conditions on their mechanical and physicochemical properties
    Martin, Yves
    Vermette, Patrick
    MACROMOLECULES, 2006, 39 (23) : 8083 - 8091
  • [8] Synthesis of unsaturated poly(ether amide)s based on amine-terminated poly(ethylene glycol)
    Won, CY
    Bentley, MD
    Harris, JM
    JOURNAL OF APPLIED POLYMER SCIENCE, 1999, 74 (04) : 913 - 920
  • [9] Crystallization Behavior and Dynamic Mechanical Properties of Poly(Lactic Acid) with Poly(Ethylene Glycol) Terminated by Benzoate
    Huang, Tong
    Miura, Motohiro
    Nobukawa, Shogo
    Yamaguchi, Masayuki
    JOURNAL OF POLYMERS AND THE ENVIRONMENT, 2014, 22 (02) : 183 - 189
  • [10] Toughening of epoxy resin with solid amine terminated poly (ethylene glycol) benzoate and effect of red mud waste particles
    Samanta, B.C.
    Maity, T.
    Dalai, S.
    Banthia, A.K.
    Journal of Materials Science and Technology, 2008, 24 (02): : 272 - 278
12345