Study the dynamic behaviour of seven DOF of full car model with semi-active suspension system

被引:0
|
作者
Krishna H. [1 ]
Vasanth S. [1 ]
Sonnappa D. [1 ]
Kumar H. [2 ]
Gangadharan K. [2 ]
机构
[1] School of Mechanical Engineering, REVA University, Rukmini Knowledge Park, Kattigenahalli, Yelahanka, Bengaluru, Karnataka
[2] Department of Mechanical Engineering, National Institute of Technology Karnataka, Srinivas Nagar, Surathkal, Mangalore, Karnataka
关键词
Full car; Fuzzy logic; Indian average road; Modified Bouc-Wen; MR damper; NSGA-II; Optimisation;
D O I
10.1504/IJVP.2021.113411
中图分类号
学科分类号
摘要
This paper presents an investigation on the ride comfort and road-holding performance of a vehicle equipped with the semi-active suspension system. The full car semi-active suspension model with 7 degrees of freedom (7 DOF) system is adopted for the study and a fuzzy-logic control strategy is considered for minimising the effect of road disturbance on vehicle performance. The responses of a vehicle have been analysed under the Indian average random road profile (ISO8608) against the conventional passive suspension system. The performance of the semi-active suspension system is evaluated by heave, roll and pitch acceleration of the vehicle body around its centre of gravity. The performance of a vehicle with the semi-active suspension system has been compared with the response conventional passive suspension system. The result specifies that, the semi-active suspension system with a fuzzy-logic controller reduces around 43% of vibration amplitude at the resonance frequency of vehicle than the passive suspension system. Copyright © 2021 Inderscience Enterprises Ltd.
引用
收藏
页码:21 / 40
页数:19
相关论文
共 50 条
  • [1] Semi-active suspension system of car model design: a comparative study
    Dutta, Debasish
    [J]. AUSTRALIAN JOURNAL OF MECHANICAL ENGINEERING, 2020, 18 (01) : 16 - 25
  • [2] A Model Predictive Control approach for semi-active suspension control problem of a full car
    Nguyen, M. Q.
    Canale, M.
    Sename, O.
    Dugard, L.
    [J]. 2016 IEEE 55TH CONFERENCE ON DECISION AND CONTROL (CDC), 2016, : 721 - 726
  • [3] SEMI-ACTIVE SUSPENSION SUBOPTIMAL CONTROL USING DYNAMIC PROGRAMMING OF A QUARTER CAR SUSPENSION SYSTEM
    Dye, John
    BuchMueller, Nathan
    Lankarani, Hamid
    [J]. PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, 2016, VOL 6, 2016,
  • [4] The study of damping control in semi-active car suspension
    Goszczak, Jaroslaw
    Mitukiewicz, Grzegorz
    Radzyminski, Bartosz
    Werner, Andrzej
    Szydlowski, Tomasz
    Batory, Damian
    [J]. JOURNAL OF VIBROENGINEERING, 2020, 22 (04) : 933 - 944
  • [5] Dynamic Analysis of Half Car Model with MR Damper as Semi-Active Suspension Element
    Hemanth, K.
    Kumar, Hemantha
    Gangadharan, K. V.
    [J]. INTERNATIONAL JOURNAL OF ACOUSTICS AND VIBRATION, 2018, 23 (02): : 138 - 146
  • [6] Development and investigation of a semi-active suspension system for full suspension tractors
    Sarami, S.
    Meyer, H. J.
    [J]. CONFERENCE: AGRICULTURAL ENGINEERING 2007, 2007, 2001 : 11 - 16
  • [7] Adjustable Valve Semi-Active Suspension System for Passenger Car
    Ahmed, M. R.
    Yusoff, A. R.
    Romlay, F. R. M.
    [J]. INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING, 2019, 16 (02) : 6470 - 6481
  • [8] Study on semi-active suspension control strategy for a full car with magneto-rheological dampers
    Shi, XD
    Qian, LF
    [J]. Proceedings of the International Conference on Mechanical Engineering and Mechanics 2005, Vols 1 and 2, 2005, : 281 - 285
  • [9] Dynamics and control policies analysis of semi-active suspension systems using a full-car model
    Mechanical Engineering Department, International Islamic University Malaysia , Malaysia
    不详
    不详
    [J]. Int. J. Veh. Noise Vib., 2007, 4 (370-405): : 370 - 405
  • [10] Model free control design for a semi-active suspension of a passenger car
    Lauwerys, C.
    Swevers, J.
    Sas, P.
    [J]. Proceedings of ISMA 2004: International Conference on Noise and Vibration Engineering, Vols 1-8, 2005, : 75 - 85