Effects of Mn Content on Microstructure and Mechanical Properties of Co-Free Medium Entropy Alloys in the Cr-Fe-Mn-Ni System

被引:0
|
作者
Niu, Mengke [1 ]
Hashimoto, Naoyuki [2 ]
Oka, Hiroshi [2 ]
Sun, Haotian [2 ]
机构
[1] Hokkaido Univ, Grad Sch Engn, Sapporo 0608628, Japan
[2] Hokkaido Univ, Fac Engn, Sapporo 0608628, Japan
关键词
high entropy alloy; atomic size mismatch; grain boundary strengthening; solid solution strengthening; SOLID-SOLUTION PHASE; STABILITY; DEFORMATION; STRENGTH; BEHAVIOR; EVOLUTION; HARDNESS; STRESS;
D O I
10.2320/matertrans.MT-MA2024012
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
This study investigates the microstructure and mechanical properties of four different Cr-Fe-Mn-Ni medium entropy alloys (MEAs) for potential nuclear applications. In this work, Cr-Fe-Mn-Ni medium entropy alloys were fabricated and analyzed. Nano hardness measurements showed higher hardness in Cr0.8FeMn1.3Ni, attributed to the increased atomic size difference caused by higher Mn content. The strength of Cr-Fe-Mn-Ni MEAs is mainly affected by solid solution strengthening and grain boundary strengthening. The tensile test revealed that Cr0.8FeMn1.3Ni exhibited the highest strength, which is correlated with its large hardness and small grain size. The increase of Mn content leads to greater atomic size difference, enhancing the hardness and reducing the grain size. Cr0.8FeMn1.3Ni shows superior strength and higher hardness compared to other Cr-Fe-Mn-Ni MEAs, suggesting its potential for nuclear applications.
引用
收藏
页码:1501 / 1507
页数:7
相关论文
共 50 条
  • [31] Sluggish diffusion in Co-Cr-Fe-Mn-Ni high-entropy alloys
    Tsai, K. -Y.
    Tsai, M. -H.
    Yeh, J. -W.
    ACTA MATERIALIA, 2013, 61 (13) : 4887 - 4897
  • [32] Significance of Mn concentration on aging behavior, microstructure evolution and mechanical properties of Fe-Ni-Mn alloys
    Rasooli, Novin
    Shirazi, Hassan
    Nili-Ahmadabadi, Mahmoud
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 24 : 1 - 15
  • [33] Elastic Properties of Heusler Alloys Ni(Co)-Mn(Cr, C)-In and Ni(Co)-Mn(Cr, C)-Sn
    Baigutlin, Danil R.
    Zagrebin, Mikhail A.
    Sokolovskiy, Vladimir V.
    Buchelnikov, Vasiliy D.
    SHAPE MEMORY ALLOYS, SMA 2018, 2018, 9 : 83 - 91
  • [34] Effect of Al on structure and mechanical properties of Fe-Mn-Cr-Ni-Al non-equiatomic high entropy alloys with high Fe content
    Stepanov, N. D.
    Shaysultanov, D. G.
    Chernichenko, R. S.
    Tikhonovsky, M. A.
    Zherebtsov, S. V.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 770 : 194 - 203
  • [35] PROPERTIES OF FE-CR-NI-MN-SI (-CO) SHAPE MEMORY ALLOYS
    MORIYA, Y
    KIMURA, H
    ISHIZAKI, S
    HASHIZUME, S
    SUZUKI, S
    SUZUKI, H
    SAMPEI, T
    JOURNAL DE PHYSIQUE IV, 1991, 1 (C4): : 433 - 437
  • [36] Influence of Mn content on the magnetic properties and microstructure in Fe-Mn-Mo alloys
    Kirindi, T.
    Sari, U.
    Journal of Alloys and Compounds, 2009, 488 (01): : 129 - 133
  • [37] Influence of Mn content on the magnetic properties and microstructure in Fe-Mn-Mo alloys
    Kirindi, T.
    Sari, U.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 488 (01) : 129 - 133
  • [38] Studies of "sluggish diffusion" effect in Co-Cr-Fe-Mn-Ni, Co-Cr-Fe-Ni and Co-Fe-Mn-Ni high entropy alloys; determination of tracer diffusivities by combinatorial approach
    Kucza, Witold
    Dabrowa, Juliusz
    Cieslak, Grzegorz
    Berent, Katarzyna
    Kulik, Tadeusz
    Danielewski, Marek
    JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 731 : 920 - 928
  • [39] Effect of aging on the microstructure and tensile properties of Fe-Ni-Mn-Cr maraging alloys
    Nedjad, S. Hossein
    Meimandi, S.
    Mahmoudi, A.
    Abedi, T.
    Yazdani, S.
    Shirazi, H.
    Ahmadabadi, M. Nili
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 501 (1-2): : 182 - 187
  • [40] Microstructure and mechanical properties of Fe-Mn-Ge alloys
    Lu, X
    Zhang, B
    Qin, ZX
    Zhang, YS
    Ding, BZ
    Hu, ZQ
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 347 (1-2): : 258 - 264